HP printer usb LaserJet P1102

[markal]

Iam novice!
Printer works sometimes, but works perfectly under win 7.
Have uninstalled and reinstalled. Many errors are shown below.
Need help …

Bus 002 Device 011: ID 03f0:002a HP, Inc LaserJet P1102

D [13/Aug/2026:06:34:51 +0200] [Job 157] Set job-printer-state-message to “Processing page 2…”, current level=INFO
D [13/Aug/2026:06:34:51 +0200] [Job 157] Rendering completed
D [13/Aug/2026:06:34:51 +0200] [Job 157] Set job-printer-state-message to “Rendering completed”, current level=INFO
D [13/Aug/2026:06:34:51 +0200] [Job 157] PID 3829 (/usr/lib/cups/filter/gstoraster) exited with no errors.
D [13/Aug/2026:06:34:51 +0200] [Job 157] PID 3830 (/usr/lib/cups/filter/hpcups) did not catch or ignore signal 13.
D [13/Aug/2026:06:34:51 +0200] [Job 157] Printer stopped due to backend errors; please consult the /var/log/cups/error_log file for details.
D [13/Aug/2026:06:34:51 +0200] [Job 157] End of messages
D [13/Aug/2026:06:34:51 +0200] [Job 157] printer-state=5(stopped)
D [13/Aug/2026:06:34:51 +0200] [Job 157] printer-state-message=“Rendering completed”
D [13/Aug/2026:06:34:51 +0200] [Job 157] printer-state-reasons=paused

HPLIP CONFIGURATION

HPLIP-Version: HPLIP 3.26.4
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 3 distro 16.0 version

Current contents of ‘/etc/hp/hplip.conf’ file:

hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.26.4

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d

Following values are determined at configure time and cannot be changed.

[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.26.4
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no

Current contents of ‘/var/lib/hp/hplip.state’ file:
[plugin]
installed = 1
eula = 1
version = 3.26.4

Current contents of ‘~/.hplip/hplip.conf’ file:
[commands]
scan =

[fax]
email_address =
voice_phone =

[installation]
date_time = 08/13/26 07:42:49
version = 3.26.4

[last_used]
device_uri = “hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q831HXQSI1c”
printer_name = HP-LaserJet-Professional-P1102
working_dir = .

[polling]
device_list =
enable = false
interval = 5

[refresh]
enable = false
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 0

[upgrade]
last_upgraded_time = 1759051460
notify_upgrade = false
pending_upgrade_time = 0

<Required/Optional>

---

External Dependencies

cups CUPS - Common Unix Printing System REQUIRED 1.1 2.4.19 OK ‘CUPS Scheduler is running’
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 10.06.0 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING ‘xsane needs to be installed’
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.2.1 OK -
error: dbus DBus - Message bus system REQUIRED - 1.14.10 MISSING ‘DBUS may not be installed or not running’
error: policykit PolicyKit - Administrative policy framework OPTIONAL - 123 MISSING ‘policykit needs to be installed’
network network -wget OPTIONAL - 1.25.0 OK -
error: avahi-utils avahi-utils OPTIONAL - - MISSING ‘avahi-utils needs to be installed’

---

General Dependencies

error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING ‘libjpeg needs to be installed’
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.4.19 MISSING ‘cups-devel needs to be installed’
error: cups-image CUPS image - CUPS image development files REQUIRED - 2.4.19 MISSING ‘cups-image needs to be installed’
libpthread libpthread - POSIX threads library REQUIRED - b’2.40’ OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING ‘libusb needs to be installed’
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING ‘sane-devel needs to be installed’
error: libavahi-dev libavahi-dev REQUIRED - - MISSING ‘libavahi-dev needs to be installed’
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9.4 MISSING ‘libnetsnmp-devel needs to be installed’
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.5.0 MISSING ‘libcrypto needs to be installed’
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.13.13 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING ‘python3-pyqt4-dbus needs to be installed’
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING ‘python3-pyqt4 needs to be installed’
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.3.2 OK -
python3-xml Python XML libraries REQUIRED - 2.7.2 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.13.13 MISSING ‘python3-devel needs to be installed’
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 11.3.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 4.0.7 OK -

---

COMPILEDEP

libtool libtool - Library building support services REQUIRED - 2.4.7 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 15.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.4.1 OK -

---

Python Extentions

cupsext CUPS-Extension REQUIRED - 3.26.4 OK -
hpmudext IO-Extension REQUIRED - 3.26.4 OK -

---

Scan Configuration

hpaio HPLIP-SANE-Backend REQUIRED - 3.26.4 OK ‘hpaio found in /etc/sane.d/dll.conf’
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
error: scanext Scan-SANE-Extension REQUIRED - 3.26.4 MISSING ‘scanext needs to be installed’

---

DISCOVERED SCANNER DEVICES

No Scanner found.

---

DISCOVERED USB DEVICES

Device URI Model

---

hp:/usb/HP_LaserJet_Professional_P1102?serial=00000000 HP LaserJet Professional P1102
0Q831HXQPR1a

---

INSTALLED CUPS PRINTER QUEUES

HP-LaserJet-Professional-P1102

Type: Printer
Device URI: hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q831HXQSI1c
PPD: /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd ppd file
PPD Description:
Printer reason unknownr HP-LaserJet-Professional-P1102 disabled since tor 13 aug 2026 06:34:51 -
Required plug-in status: Installed
error: Device not found
error: Communication status: Failed

HP_LaserJet_Professional_P1102

Type: Unknown
Device URI: usb://HP/LaserJet%20Professional%20P1102?serial=000000000Q831HXQPR1a
PPD: /etc/cups/ppd/HP_LaserJet_Professional_P1102.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_Professional_P1102.ppd ppd file
PPD Description:
Printer status: printer HP_LaserJet_Professional_P1102 is idle. enabled since tor 13 aug 2026 06:50:47
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

---

PERMISSION

USB None Required - - OK Node:‘/dev/bus/usb/002/011’ Perm:’ root lp rw- rw- rw- rw- r–’

---

SUMMARY

Missing Required Dependencies

error: ‘dbus-1-devel’ package is missing/incompatible
error: ‘libjpeg-devel’ package is missing/incompatible
error: ‘zlib-devel’ package is missing/incompatible
error: ‘cups-devel’ package is missing/incompatible
error: ‘cupsddk’ package is missing/incompatible
error: ‘cups-devel’ package is missing/incompatible
error: ‘libusb-1_0-devel’ package is missing/incompatible
error: ‘libusb-1_0-0’ package is missing/incompatible
error: ‘libusb-0_1-4’ package is missing/incompatible
error: ‘sane-backends-devel’ package is missing/incompatible
error: ‘libavahi-devel’ package is missing/incompatible
error: ‘net-snmp-devel’ package is missing/incompatible
error: ‘openssl’ package is missing/incompatible
error: ‘python3-devel’ package is missing/incompatible

Missing Optional Dependencies

error: ‘xsane’ package is missing/incompatible
error: ‘avahi-utils’ package is missing/incompatible
error: ‘dbus-1-python3-devel’ package is missing/incompatible
error: ‘dbus-1-python3’ package is missing/incompatible

Total Errors: 17
Total Warnings: 1

[deano_ferrari]

Please, when sharing commands and output, post as preformatted text (refer to the
</> button in the forum editor). It makes it much easier for us to read.

Posting code or preformatted text

Most of the HPLIP diagnostic output is a red herring. For example hp-doctor is reporting development packages as “missing” because this is the openSUSE-packaged HPLIP, not a source-build environment.

You seem to have two queues present. Only the first one is associated with HPLIP…

Device URI: hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q831HXQSI1c
Device URI: usb://HP/LaserJet%20Professional%20P1102?serial=000000000Q831HXQPR1a

The second is using the generic CUPS USB backend rather than HPLIP. Let’s first confirm the current CUPS configuration.

With the printer switched on, run:

lpstat -t

[deano_ferrari]

To gather further diagnostics, remove the existing (often lengthy) log, and put CUPS into debugging mode…

sudo rm /var/log/cups/error_log
sudo cupsctl --debug-logging

Now attempt a print job, and then examine the CUPS error_log file…
cat /var/log/cups/error_log
You can also filter the output a bit like this…
egrep -iA3 "filter|fail|error" /var/log/cups/error_log
The output will only be relevant if the print job fails of course.

[deano_ferrari]

Now I see that you already have a topic opened for this…

HPprinter old USB P1102

As a novice: a lot of trouble with USB printer HP p1102, choose to print one page = works, try to print another page = does not work, the next day try to print one page = does not work, next page = does not work. on some odd occasions it has been possible to print multiple pages. Is it really supposed to be like this?? found a command that works: (hieroglyphics for me):: hp-check -t /usr/bin/hp-check:630: SyntaxWarning: invalid escape sequence ‘\s’ lsusb_pat = re.compile(“”“^Bus\s([0-9…

You should not be raising duplicate threads.

[markal]

@deano_ferrari

egrep -iA3 “filter|fail|error” /var/log/cups/error_log

egrep -iA3 "filter|fail|error" /var/log/cups/error_log
I [13/Aug/2026:14:58:54 +0200] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [13/Aug/2026:14:58:54 +0200] Loading printer HP-LaserJet-Professional-P1102...
D [13/Aug/2026:14:58:54 +0200] cupsdMarkDirty(P----)
D [13/Aug/2026:14:58:54 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients"
--
D [13/Aug/2026:14:58:54 +0200] FindDeviceById failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
D [13/Aug/2026:14:58:54 +0200] Using profile ID "HP-LaserJet-Professional-P1102-Gray..".
D [13/Aug/2026:14:58:54 +0200] Calling CreateProfile(HP-LaserJet-Professional-P1102-Gray..,temp)
W [13/Aug/2026:14:58:54 +0200] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
D [13/Aug/2026:14:58:54 +0200] Using profile ID "HP-LaserJet-Professional-P1102-RGB..".
D [13/Aug/2026:14:58:54 +0200] Calling CreateProfile(HP-LaserJet-Professional-P1102-RGB..,temp)
W [13/Aug/2026:14:58:54 +0200] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
I [13/Aug/2026:14:58:54 +0200] Registering ICC color profiles for "HP-LaserJet-Professional-P1102".
D [13/Aug/2026:14:58:54 +0200] Calling CreateDevice(cups-HP-LaserJet-Professional-P1102,temp)
W [13/Aug/2026:14:58:54 +0200] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
D [13/Aug/2026:14:58:54 +0200] Calling FindDeviceById(cups-HP_LaserJet_Professional_P1102)
D [13/Aug/2026:14:58:54 +0200] FindDeviceById failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
D [13/Aug/2026:14:58:54 +0200] Using profile ID "HP_LaserJet_Professional_P1102-Gray..".
D [13/Aug/2026:14:58:54 +0200] Calling CreateProfile(HP_LaserJet_Professional_P1102-Gray..,temp)
W [13/Aug/2026:14:58:54 +0200] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
D [13/Aug/2026:14:58:54 +0200] Using profile ID "HP_LaserJet_Professional_P1102-RGB..".
D [13/Aug/2026:14:58:54 +0200] Calling CreateProfile(HP_LaserJet_Professional_P1102-RGB..,temp)
W [13/Aug/2026:14:58:54 +0200] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
I [13/Aug/2026:14:58:54 +0200] Registering ICC color profiles for "HP_LaserJet_Professional_P1102".
D [13/Aug/2026:14:58:54 +0200] Calling CreateDevice(cups-HP_LaserJet_Professional_P1102,temp)
W [13/Aug/2026:14:58:54 +0200] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
I [13/Aug/2026:14:58:54 +0200] Listening to [v1.::1]:631 on fd 7...
I [13/Aug/2026:14:58:54 +0200] Listening to 127.0.0.1:631 on fd 8...
I [13/Aug/2026:14:58:54 +0200] Listening to /run/cups/cups.sock on fd 3...
--
D [13/Aug/2026:14:58:54 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=1252, response=0x56257917f030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:14:58:54 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:14:58:54 +0200] [Client 1] bytes=0, http_state=0, data_remaining=1252
D [13/Aug/2026:14:58:54 +0200] [Client 1] Flushing write buffer.
--
D [13/Aug/2026:14:58:54 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=533, response=0x5625792463e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:14:58:54 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:14:58:54 +0200] [Client 1] bytes=0, http_state=0, data_remaining=533
D [13/Aug/2026:14:58:54 +0200] [Client 1] Flushing write buffer.
--
D [13/Aug/2026:15:01:36 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=2830, response=0x56257924b970(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:36 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:36 +0200] [Client 2] bytes=0, http_state=0, data_remaining=2830
D [13/Aug/2026:15:01:36 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:37 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=1455, response=0x56257923dcf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:37 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:37 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1455
D [13/Aug/2026:15:01:37 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:37 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=157, response=0x562579248610(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:37 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:37 +0200] [Client 2] bytes=0, http_state=0, data_remaining=157
D [13/Aug/2026:15:01:37 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:37 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 3] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 3] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 3] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 3] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 3] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 3] Flushing write buffer.
D [13/Aug/2026:15:01:37 +0200] [Client 3] New state is HTTP_STATE_WAITING
D [13/Aug/2026:15:01:37 +0200] [Client 3] Waiting for request.
--
D [13/Aug/2026:15:01:37 +0200] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Aug/2026:15:01:37 +0200] [Client 3] Closing connection.
D [13/Aug/2026:15:01:37 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Aug/2026:15:01:37 +0200] [Client 2] POST / HTTP/1.1
--
D [13/Aug/2026:15:01:37 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=1455, response=0x562579249220(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:37 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:37 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1455
D [13/Aug/2026:15:01:37 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:37 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=157, response=0x56257915d270(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:37 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:37 +0200] [Client 2] bytes=0, http_state=0, data_remaining=157
D [13/Aug/2026:15:01:37 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:37 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 4] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 4] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 4] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 4] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 4] con->http=0x56257926d820
D [13/Aug/2026:15:01:37 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:37 +0200] [Client 4] Flushing write buffer.
D [13/Aug/2026:15:01:37 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [13/Aug/2026:15:01:37 +0200] [Client 4] Waiting for request.
--
D [13/Aug/2026:15:01:37 +0200] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Aug/2026:15:01:37 +0200] [Client 4] Closing connection.
D [13/Aug/2026:15:01:37 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Aug/2026:15:01:37 +0200] [Client 2] POST / HTTP/1.1
--
D [13/Aug/2026:15:01:37 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=2830, response=0x56257924b910(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:37 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:37 +0200] [Client 2] bytes=0, http_state=0, data_remaining=2830
D [13/Aug/2026:15:01:37 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:38 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=2830, response=0x562579248610(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:38 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:38 +0200] [Client 2] bytes=0, http_state=0, data_remaining=2830
D [13/Aug/2026:15:01:38 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:39 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=1455, response=0x56257924e4c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:39 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:39 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1455
D [13/Aug/2026:15:01:39 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:39 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=157, response=0x562579248610(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:39 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:39 +0200] [Client 2] bytes=0, http_state=0, data_remaining=157
D [13/Aug/2026:15:01:39 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:39 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:39 +0200] [Client 5] con->http=0x56257926d820
D [13/Aug/2026:15:01:39 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:39 +0200] [Client 5] con->http=0x56257926d820
D [13/Aug/2026:15:01:39 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:39 +0200] [Client 5] con->http=0x56257926d820
D [13/Aug/2026:15:01:39 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:39 +0200] [Client 5] con->http=0x56257926d820
D [13/Aug/2026:15:01:39 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:39 +0200] [Client 5] con->http=0x56257926d820
D [13/Aug/2026:15:01:39 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:39 +0200] [Client 5] Flushing write buffer.
D [13/Aug/2026:15:01:39 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [13/Aug/2026:15:01:39 +0200] [Client 5] Waiting for request.
--
D [13/Aug/2026:15:01:39 +0200] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Aug/2026:15:01:39 +0200] [Client 5] Closing connection.
D [13/Aug/2026:15:01:39 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Aug/2026:15:01:40 +0200] Expiring subscriptions...
--
D [13/Aug/2026:15:01:44 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=1455, response=0x562579246e70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1455
D [13/Aug/2026:15:01:44 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:44 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=157, response=0x56257922f9a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 2] bytes=0, http_state=0, data_remaining=157
D [13/Aug/2026:15:01:44 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:44 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:44 +0200] [Client 6] con->http=0x56257926d820
D [13/Aug/2026:15:01:44 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:44 +0200] [Client 6] con->http=0x56257926d820
D [13/Aug/2026:15:01:44 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:44 +0200] [Client 6] con->http=0x56257926d820
D [13/Aug/2026:15:01:44 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:44 +0200] [Client 6] con->http=0x56257926d820
D [13/Aug/2026:15:01:44 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:44 +0200] [Client 6] con->http=0x56257926d820
D [13/Aug/2026:15:01:44 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENG
TH, data_remaining=11081, response=(nil)(), pipe_pid=0, file=17
D [13/Aug/2026:15:01:44 +0200] [Client 6] Flushing write buffer.
D [13/Aug/2026:15:01:44 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [13/Aug/2026:15:01:44 +0200] [Client 6] Waiting for request.
--
D [13/Aug/2026:15:01:44 +0200] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Aug/2026:15:01:44 +0200] [Client 6] Closing connection.
D [13/Aug/2026:15:01:44 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Aug/2026:15:01:44 +0200] [Client 2] POST / HTTP/1.1
--
D [13/Aug/2026:15:01:44 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=1455, response=0x56257924de60(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1455
D [13/Aug/2026:15:01:44 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:44 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=13851, response=0x56257922f960(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 2] bytes=0, http_state=0, data_remaining=13851
D [13/Aug/2026:15:01:44 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:44 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=201, response=0x56257915d8a0(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 2] bytes=0, http_state=0, data_remaining=201
D [13/Aug/2026:15:01:44 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:01:44 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=963, response=0x562579247380(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 1] bytes=0, http_state=0, data_remaining=963
D [13/Aug/2026:15:01:44 +0200] [Client 1] Flushing write buffer.
--
D [13/Aug/2026:15:01:44 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=171, response=0x562579245d80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:01:44 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:01:44 +0200] [Client 2] bytes=0, http_state=0, data_remaining=171
D [13/Aug/2026:15:01:44 +0200] [Client 2] Flushing write buffer.
--
D [13/Aug/2026:15:02:06 +0200] [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Aug/2026:15:02:06 +0200] [Client 2] Closing connection.
D [13/Aug/2026:15:02:06 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Aug/2026:15:02:06 +0200] Expiring subscriptions...

D [13/Aug/2026:15:04:47 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LEN
GTH, data_remaining=106, response=0x56257923dc40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Aug/2026:15:04:47 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Aug/2026:15:04:47 +0200] [Client 1] bytes=0, http_state=0, data_remaining=106
D [13/Aug/2026:15:04:47 +0200] [Client 1] Flushing write buffer.

Edit by Sauerland:
Using Code-Tags
@markal
Please read #2 from @deano_ferrari about usinfg Code-Tags.
Better to read…

[deano_ferrari]

I don’t see evidence of a print job in that output. There are CUPS messages, but nothing showing a job being started or processed. No [Job N], hpcups, filter, or backend messages.

You need to print something, and if it fails share the log here.