April 2025 Screenshots

Hi All, I acquired some newer hardware Dell OptiPlex XE3 and Dell OptiPlex 3080 Micro, so setup Tumbleweed on the XE3 and added the Quadro T400 in this system and Aeon on the Micro setup :wink:

System:
  Kernel: 6.14.0-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
  Desktop: GNOME v: 48.0 tk: GTK v: 3.24.50 wm: gnome-shell dm: GDM
    Distro: Aeon
Machine:
  Type: Desktop System: Dell product: OptiPlex 3080 v: N/A
    serial: <superuser required> Chassis: type: 3 serial: <superuser required>
  Mobo: Dell model: 0M3F6C v: A01 serial: <superuser required> part-nu: 09A8
    UEFI: Dell v: 2.29.0 date: 01/24/2025
CPU:
  Info: 6-core model: Intel Core i5-10500T bits: 64 type: MT MCP
    arch: Comet Lake rev: 3 cache: L1: 384 KiB L2: 1.5 MiB L3: 12 MiB
  Speed (MHz): avg: 800 min/max: 800/3800 cores: 1: 800 2: 800 3: 800 4: 800
    5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 bogomips: 55199
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel CometLake-S GT2 [UHD Graphics 630] vendor: Dell driver: i915
    v: kernel arch: Gen-9.5 ports: active: DP-1 empty: DP-2, HDMI-A-1,
    HDMI-A-2, HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:9bc8
  Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.6
    compositor: gnome-shell driver: gpu: i915 display-ID: 0
  Monitor-1: DP-1 model: Dell P2018H res: 1600x900 dpi: 94
    diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: device: 0 drv: iris device: 1 drv: swrast gbm:
    drv: iris surfaceless: drv: iris wayland: drv: iris x11: drv: iris
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.2 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel UHD Graphics 630 (CML GT2)
    device-ID: 8086:9bc8 display-ID: :0.0
  API: Vulkan v: 1.4.309 surfaces: xcb,xlib,wayland device: 0
    type: integrated-gpu driver: N/A device-ID: 8086:9bc8
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo gpu: gputop,
    intel_gpu_top, lsgpu x11: xprop
Audio:
  Device-1: Intel Comet Lake PCH-V cAVS vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a3f0
  API: ALSA v: k6.14.0-1-default status: kernel-api
  Server-1: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Dell driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1
    port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8168
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 238.47 GiB used: 8.18 GiB (3.4%)
  ID-1: /dev/nvme0n1 vendor: Silicon Power model: SPCC M.2 PCIe SSD
    size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> temp: 39.9 C
Partition:
  ID-1: / size: 234.46 GiB used: 8 GiB (3.4%) fs: btrfs dev: /dev/dm-0
    mapped: aeon_root
  ID-2: /boot/efi size: 4 GiB used: 183.1 MiB (4.5%) fs: vfat
    dev: /dev/nvme0n1p1
  ID-3: /home size: 234.46 GiB used: 8 GiB (3.4%) fs: btrfs dev: /dev/dm-0
    mapped: aeon_root
  ID-4: /opt size: 234.46 GiB used: 8 GiB (3.4%) fs: btrfs dev: /dev/dm-0
    mapped: aeon_root
  ID-5: /var size: 234.46 GiB used: 8 GiB (3.4%) fs: btrfs dev: /dev/dm-0
    mapped: aeon_root
Swap:
  ID-1: swap-1 type: zram size: 15.24 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  Src: /sys System Temperatures: cpu: 32.0 C mobo: 29.0 C
  Fan Speeds (rpm): fan-1: 1791
Info:
  Memory: total: 16 GiB available: 15.24 GiB used: 1.5 GiB (9.8%)
  Processes: 318 Power: uptime: 0h 0m wakeups: 0 Init: systemd v: 257
    default: graphical
  Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 18
    Compilers: N/A Shell: Bash v: 5.2.37 running-in: ptyxis-agent inxi: 3.3.37

System:
  Kernel: 6.14.0-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
  Desktop: GNOME v: 48.0 tk: GTK v: 3.24.50 wm: gnome-shell dm: GDM
    Distro: openSUSE Tumbleweed 20250403
Machine:
  Type: Desktop System: Dell product: OptiPlex XE3 v: N/A
    serial: <superuser required> Chassis: type: 3 serial: <superuser required>
  Mobo: Dell model: 0CWR57 v: A02 serial: <superuser required> part-nu: 0863
    UEFI: Dell v: 1.35.0 date: 01/22/2025
CPU:
  Info: 6-core model: Intel Core i7-8700 bits: 64 type: MT MCP
    arch: Coffee Lake rev: A cache: L1: 384 KiB L2: 1.5 MiB L3: 12 MiB
  Speed (MHz): avg: 800 min/max: 800/4600 cores: 1: 800 2: 800 3: 800 4: 800
    5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 bogomips: 76799
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: NVIDIA TU117GLM [Quadro T400 Mobile] driver: nvidia v: 570.133.07
    arch: Turing pcie: speed: 2.5 GT/s lanes: 16 ports: active: none off: DP-2
    empty: DP-1,DP-3 bus-ID: 01:00.0 chip-ID: 10de:1fb2
  Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.6
    compositor: gnome-shell driver: X: loaded: nvidia unloaded: modesetting,vesa
    alternate: fbdev,nouveau,nv gpu: nvidia,nvidia-nvswitch display-ID: 0
  Monitor-1: DP-2 model: Dell P2018H res: 1600x900 dpi: 94
    diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: device: 0 drv: nvidia gbm: drv: nvidia
    surfaceless: drv: nvidia wayland: drv: nvidia x11: drv: nvidia
  API: OpenGL v: 4.6.0 vendor: nvidia v: 570.133.07 glx-v: 1.4
    direct-render: yes renderer: NVIDIA T400/PCIe/SSE2 display-ID: :0.0
  API: Vulkan v: 1.4.309 surfaces: xcb,xlib,wayland device: 0
    type: discrete-gpu driver: N/A device-ID: 10de:1fb2
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
    gpu: nvidia-settings,nvidia-smi x11: xprop,xrandr
Audio:
  Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a348
  Device-2: NVIDIA driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s
    lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10fa
  API: ALSA v: k6.14.0-1-default status: kernel-api with: aoss
    type: oss-emulator
  Server-1: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel
    port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15bb
  IF: em1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 953.87 GiB used: 28.23 GiB (3.0%)
  ID-1: /dev/nvme0n1 vendor: Silicon Power model: SPCC M.2 PCIe SSD
    size: 953.87 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> temp: 23.9 C
Partition:
  ID-1: / size: 949.87 GiB used: 28.11 GiB (3.0%) fs: btrfs
    dev: /dev/nvme0n1p2
  ID-2: /boot/efi size: 4 GiB used: 122 MiB (3.0%) fs: vfat
    dev: /dev/nvme0n1p1
  ID-3: /home size: 949.87 GiB used: 28.11 GiB (3.0%) fs: btrfs
    dev: /dev/nvme0n1p2
  ID-4: /opt size: 949.87 GiB used: 28.11 GiB (3.0%) fs: btrfs
    dev: /dev/nvme0n1p2
  ID-5: /var size: 949.87 GiB used: 28.11 GiB (3.0%) fs: btrfs
    dev: /dev/nvme0n1p2
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 30.0 C pch: 28.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB available: 15.33 GiB used: 1.37 GiB (9.0%)
  Processes: 314 Power: uptime: 0h 0m wakeups: 0 Init: systemd v: 257
    default: graphical
  Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 11
    Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.37 running-in: ptyxis-agent
    inxi: 3.3.37
6 Likes


For something different this month

6 Likes

And another test setup :wink: another Dell I acquired Precision 5820 XL Tower. It has some nice features. I might actually move to this system as my primary desktop since the W series Xeon is a v4… but need more cores… so some extra $$$

/lib64/ld-linux-x86-64.so.2 --help | grep x86-64-v
  x86-64-v4 (supported, searched)
  x86-64-v3 (supported, searched)
  x86-64-v2 (supported, searched)

System:
  Kernel: 6.14.0-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
  Desktop: GNOME v: 48.0 tk: GTK v: 3.24.50 wm: gnome-shell dm: GDM
    Distro: openSUSE Tumbleweed 20250405
Machine:
  Type: Desktop System: Dell product: Precision 5820 Tower v: N/A
    serial: <superuser required> Chassis: type: 3 serial: <superuser required>
  Mobo: Dell model: 0TVW7J v: A09 serial: <superuser required> part-nu: 0738
    UEFI: Dell v: 2.41.0 date: 02/14/2025
CPU:
  Info: quad core model: Intel Xeon W-2102 bits: 64 type: MCP arch: Skylake
    rev: 4 cache: L1: 256 KiB L2: 4 MiB L3: 8.2 MiB
  Speed (MHz): avg: 1200 min/max: 1200/2900 cores: 1: 1200 2: 1200 3: 1200
    4: 1200 bogomips: 23199
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel DG2 [Arc A310] driver: i915 v: kernel arch: Xe-HPG ports:
    active: HDMI-A-1 empty: DP-1, DP-2, HDMI-A-2, HDMI-A-3 bus-ID: 0000:93:00.0
    chip-ID: 8086:56a6
  Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.6
    compositor: gnome-shell driver: gpu: i915 display-ID: 0
  Monitor-1: HDMI-A-1 model: Dell P2018H res: 1600x900 dpi: 94
    diag: 494mm (19.4")
  API: EGL v: 1.5 platforms: device: 0 drv: iris device: 1 drv: swrast gbm:
    drv: iris surfaceless: drv: iris wayland: drv: iris x11: drv: iris
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.2 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel Arc A310 Graphics (DG2)
    device-ID: 8086:56a6 display-ID: :0.0
  API: Vulkan v: 1.4.309 surfaces: xcb,xlib,wayland device: 0
    type: discrete-gpu driver: N/A device-ID: 8086:56a6
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo gpu: gputop,
    intel_gpu_top, lsgpu x11: xprop,xrandr
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 0000:00:1f.3 chip-ID: 8086:a2f0
  Device-2: Intel DG2 Audio driver: snd_hda_intel v: kernel
    bus-ID: 0000:94:00.0 chip-ID: 8086:4f92
  API: ALSA v: k6.14.0-1-default status: kernel-api with: aoss
    type: oss-emulator
  Server-1: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel
    port: N/A bus-ID: 0000:00:1f.6 chip-ID: 8086:15e3
  IF: em1 state: up speed: 1000 Mbps duplex: full mac: <filter>
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 bus-ID: 0000:bc:05.5 chip-ID: 8086:201d
Drives:
  Local Storage: total: 1.03 TiB used: 9.97 GiB (0.9%)
  ID-1: /dev/sda vendor: Silicon Power model: SPCC M.2 SSD size: 119.24 GiB
    speed: 6.0 Gb/s serial: <filter>
  ID-2: /dev/sdb vendor: Western Digital model: WD5000LPSX-75A6WT0
    size: 465.76 GiB speed: 6.0 Gb/s serial: <filter>
  ID-3: /dev/sdc vendor: Western Digital model: WD5000LPSX-75A6WT0
    size: 465.76 GiB speed: 6.0 Gb/s serial: <filter>
Partition:
  ID-1: / size: 115.24 GiB used: 9.91 GiB (8.6%) fs: btrfs dev: /dev/sda2
  ID-2: /boot/efi size: 3.99 GiB used: 56 MiB (1.4%) fs: vfat dev: /dev/sda1
  ID-3: /home size: 115.24 GiB used: 9.91 GiB (8.6%) fs: btrfs
    dev: /dev/sda2
  ID-4: /opt size: 115.24 GiB used: 9.91 GiB (8.6%) fs: btrfs dev: /dev/sda2
  ID-5: /var size: 115.24 GiB used: 9.91 GiB (8.6%) fs: btrfs dev: /dev/sda2
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 30.0 C mobo: 27.0 C
  Fan Speeds (rpm): cpu: 2857 fan-2: 760 fan-3: 598
Info:
  Memory: total: 32 GiB note: est. available: 30.89 GiB used: 1.51 GiB (4.9%)
  Processes: 250 Power: uptime: 0h 6m wakeups: 0 Init: systemd v: 257
    default: graphical
  Packages: pm: rpm pkgs: N/A note: see --rpm pm: flatpak pkgs: 13
    Compilers: N/A Shell: Bash v: 5.2.37 running-in: ptyxis-agent inxi: 3.3.37
2 Likes

I’m in

3 Likes

I :slightly_smiling_face:'m back

3 Likes

Screenshot-From-2025-04-16-00-35-50


Screenshot-From-2025-04-16-00-38-12

2 Likes