Toen ik deze laptop kocht, preïnstalled met kubuntu en webcam issues. Werd gepatcht, kernel geüpdated, en alles werkte. (https://www.dell.com/community/Linux-General/Dell-xps-13-9370-Webcam-support/td-p/6032049/page/11) Maar een Linux laptop zonder Opensuse is geen laptop. Dus Opensuse erop gegooid, en de webcam werkt niet. Ik heb me suf gegoogeld, maar kom er niet uit. Een van jullie wel?
btw: dmesg | grep uvc
6.620252] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
6.627815] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
6.627818] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
6.627820] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
6.627821] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
6.627823] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
I hardly use the webcam, but in these Coronoa-times, I started again. Problem appeared again. Tried everything, but to no avail.
Maybe maybe - but what do i know - it has to do with that uvcview isn’t properly supported? when I check the software on Opensuse, he just offers uvcview options for SLE.
the strange thing is: after a reboot i can use the webcam as long as he doesn’ t freeze. he freezes as soon as i move my screen of after a very short while. after that moment he isnt’t recognized any more.
there is no /dev/video0
“GUVCVIEW: version 2.0.6 ERROR opening V4L interface : No such file or directory”
Vreend, als ik het doe. Bijna de zelfde melding maar de webcam application werkt prima.
Welke applicatie ik ook gebruik Kamoso, Kamerka of cheese.
Hier schiet je dus ook geen moer mee op met mij.
dmesg | grep uvc
7.816895] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0992)
7.894685] uvcvideo 6-1:1.0: Entity type for entity Extension 4 was not initialized!
7.894688] uvcvideo 6-1:1.0: Entity type for entity Extension 10 was not initialized!
7.894689] uvcvideo 6-1:1.0: Entity type for entity Extension 12 was not initialized!
7.894690] uvcvideo 6-1:1.0: Entity type for entity Extension 8 was not initialized!
7.894691] uvcvideo 6-1:1.0: Entity type for entity Extension 11 was not initialized!
7.894692] uvcvideo 6-1:1.0: Entity type for entity Processing 2 was not initialized!
7.894693] uvcvideo 6-1:1.0: Entity type for entity Extension 13 was not initialized!
7.894694] uvcvideo 6-1:1.0: Entity type for entity Camera 1 was not initialized!
7.894816] usbcore: registered new interface driver uvcvideo
ben@linux-odob:~>
In this particular case, the webcam froze as soon as i moved my screen. The difference before and after dmsesg | grep uvcvideo
“uvcvideo: Failed to resubmit video URB (-19)”
After that, after rebooting i just can’t start my webcam anymore.
ls /dev/video0 gives as output:
“can’t get acces to /dev/video: File or directory doesn’t exist”
dmesg -l err
9.654762] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
10.623058] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
11.922533] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
12.890781] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
12.890805] usb usb1-port5: unable to enumerate USB device
22.546751] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
23.518854] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
24.806855] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
25.778752] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
25.778785] usb usb1-port5: unable to enumerate USB device
Sorry for being unclear. I have a Dell xps 13 7930 (2018) laptop, with a build in webcam. There were/are several issues with this particular model. I started with Ubuntu pre-installed. The kernel was patched after some time, the webcam was doing fine. I switched after a year over to OpenSuse (my truelove ;)) had again the problem, solved it (see above), almost never used it, till Corona struck, and theere i had this problem. but after several several several hours of investigating (and I am a noob concerning kernel, en modules) i can’ t find a solution. When i move the screen of my laptop, the cam (via luvcview or guvcview) freezes.
Although i own the black model, it is this one (see beneath). The position of the webcam is low, beneath the screen, in this with model you can see him clearly.
Okay, understood, it is a build in webcam that works when the computers is booted but when you tilt the screen it does no longer work.
That, together with the dmesg errors make me think this is a cabling problem. The cable between the webcam and the processboard has to go through the hinge and on these places cables typically can (partially) break, another possibility is that a connector did come lose.
Your dmesg showed only errors, can you also post the surrounding USB related lines? That could give further clues.
Thank you for paying attention for this issue. I don’t think it has to do with a loose connection or any other hardware problem. As far as I know it is related to Dell <> BIOS <> uvcvideo. But I gathered some info:
229.651871] uvcvideo: Failed to resubmit video URB (-19).
229.655869] uvcvideo: Failed to resubmit video URB (-19).
229.659869] uvcvideo: Failed to resubmit video URB (-19).
229.663869] uvcvideo: Failed to resubmit video URB (-19).
229.667869] uvcvideo: Failed to resubmit video URB (-19).
230.045563] usb 1-5: new high-speed USB device number 7 using xhci_hcd
230.113847] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
230.113853] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
230.113857] usb 1-5: Product: Integrated_Webcam_HD
230.113860] usb 1-5: Manufacturer: CN0FFMHCLOG0083FB5M2A01
230.113863] usb 1-5: SerialNumber: 200901010001
230.118305] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
230.125848] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
230.125856] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
230.125862] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
230.125867] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
230.125872] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
230.126183] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input38
230.127868] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
230.130196] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
230.130205] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
230.130210] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
230.130215] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
230.130553] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input39
249.261168] usb 1-5: USB disconnect, device number 7
249.261642] uvcvideo: Failed to resubmit video URB (-19).
249.265632] uvcvideo: Failed to resubmit video URB (-19).
249.269631] uvcvideo: Failed to resubmit video URB (-19).
249.273631] uvcvideo: Failed to resubmit video URB (-19).
249.277631] uvcvideo: Failed to resubmit video URB (-19).
249.637682] usb 1-5: new high-speed USB device number 8 using xhci_hcd
249.706504] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
249.706512] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
249.706516] usb 1-5: Product: Integrated_Webcam_HD
249.706520] usb 1-5: Manufacturer: CN0FFMHCLOG0083FB5M2A01
249.706523] usb 1-5: SerialNumber: 200901010001
249.711379] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
249.721476] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
249.721484] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
249.721488] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
249.721491] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
249.721494] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
249.721725] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input40
249.723300] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
249.725812] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
249.725817] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
249.725821] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
249.725824] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
249.726011] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input41
262.492545] usb 1-5: USB disconnect, device number 8
262.495267] uvcvideo: Failed to resubmit video URB (-19).
262.499261] uvcvideo: Failed to resubmit video URB (-19).
262.503260] uvcvideo: Failed to resubmit video URB (-19).
262.507261] uvcvideo: Failed to resubmit video URB (-19).
262.511261] uvcvideo: Failed to resubmit video URB (-19).
262.865557] usb 1-5: new high-speed USB device number 9 using xhci_hcd
262.933582] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
262.933588] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
262.933592] usb 1-5: Product: Integrated_Webcam_HD
262.933595] usb 1-5: Manufacturer: CN0FFMHCLOG0083FB5M2A01
262.933597] usb 1-5: SerialNumber: 200901010001
262.938499] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
262.947994] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
262.948001] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
262.948005] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
262.948008] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
262.948011] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
262.948339] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input42
262.949992] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
262.952535] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
262.952540] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
262.952543] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
262.952547] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
262.952851] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input43
291.916809] usb 1-5: USB disconnect, device number 9
291.918197] uvcvideo: Failed to resubmit video URB (-19).
291.922151] uvcvideo: Failed to resubmit video URB (-19).
291.926151] uvcvideo: Failed to resubmit video URB (-19).
291.930151] uvcvideo: Failed to resubmit video URB (-19).
291.934151] uvcvideo: Failed to resubmit video URB (-19).
292.333711] usb 1-5: new high-speed USB device number 10 using xhci_hcd
292.402249] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
292.402256] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
292.402260] usb 1-5: Product: Integrated_Webcam_HD
292.402263] usb 1-5: Manufacturer: CN0FFMHCLOG0083FB5M2A01
292.402265] usb 1-5: SerialNumber: 200901010001
292.409619] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
292.419765] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
292.419771] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
292.419774] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
292.419778] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
292.419781] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
292.420138] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input44
292.424568] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
292.427584] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
292.427590] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
292.427593] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
292.427596] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
292.427934] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input45\CODE]
This time, after booting it was different in this way that de cam instantly froze. (but i dupdated). And maybe I should add, that as in this case incidentaly uvcview-qt5 finds 4 integrated webcams.
Good you posted the complete dmesg also with but at the end there is
and that does not work. Not sure what kind of Wiki dialect this is but also the end should have a plain
Filtering out only the USB connect and disconnect messages you see:
230.045563] usb 1-5: new high-speed USB device number 7 using xhci_hcd
249.261168] usb 1-5: USB disconnect, device number 7
249.637682] usb 1-5: new high-speed USB device number 8 using xhci_hcd
262.492545] usb 1-5: USB disconnect, device number 8
262.865557] usb 1-5: new high-speed USB device number 9 using xhci_hcd
291.916809] usb 1-5: USB disconnect, device number 9
292.333711] usb 1-5: new high-speed USB device number 10 using xhci_hcd
So on 230 seconds the Webcam is found, then 9 seconds late the USB device disappears and half a second later it is found again. After 3 seconds it disappears and comes back again after half a second and so on. The device number increasing is indicating the a new device is seen although the system (later) does see the new device has the same ID’s.
That is really the problem, very likely there is no driver problem, the uvcvideo is just complaining it can not find the device
Not sure if you get more useful information out of it, but you can get USB tracedata.
Still my guess is that this is hardware related, it could be that the driver enabled the webcam and more current is drawn and because of a somewhat lose cable the resistance of the cable is too high causing a voltage drop. Because of that voltage drop the device disconnects on the USB bus.
It is really a theory, no proof, maybe other have better theories.
Ok, last entry, unless you see something interesting, Marel. Two differences: 1. the webcam didn’t freeze instantly; 2. it froze, when i tilted the whole laptop (not the screen) cautiously.
11.694282] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
11.707885] mc: Linux media interface: v0.10
11.785204] videodev: Linux video capture interface: v2.00
11.873067] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DELL07E6:00/0018:06CB:76AF.0003/input/input21
11.873197] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DELL07E6:00/0018:06CB:76AF.0003/input/input22
11.873324] hid-multitouch 0018:06CB:76AF.0003: input,hidraw2: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
11.875272] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
11.875274] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
11.875716] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00140-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 29eb8ca1
11.950235] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 4ac0889b
12.022129] Bluetooth: Core ver 2.22
12.022149] NET: Registered protocol family 31
12.022149] Bluetooth: HCI device and connection manager initialized
12.022153] Bluetooth: HCI socket layer initialized
12.022155] Bluetooth: L2CAP socket layer initialized
12.022158] Bluetooth: SCO socket layer initialized
12.069491] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
12.078086] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
12.078089] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
12.078090] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
12.078091] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
12.078091] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
12.078150] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24
12.078842] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
12.080835] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
12.080836] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
12.080837] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
12.080839] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
12.080957] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input25
12.081012] usbcore: registered new interface driver uvcvideo
12.081013] USB Video Class driver (1.1.1)
12.091036] ath10k_pci 0000:02:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
12.156078] usbcore: registered new interface driver btusb
12.161081] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
12.161082] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
12.173856] ath: EEPROM regdomain: 0x6c
12.173857] ath: EEPROM indicates we should expect a direct regpair map
12.173858] ath: Country alpha2 being used: 00
12.173858] ath: Regpair used: 0x6c
12.177763] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
12.221446] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
12.280370] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
12.280371] Bluetooth: BNEP filters: protocol multicast
12.280375] Bluetooth: BNEP socket layer initialized
12.798826] NET: Registered protocol family 38
12.868866] NET: Registered protocol family 17
12.882288] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
12.882891] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
12.883991] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
12.884070] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
12.884813] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
12.885012] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
15.671102] broken atomic modeset userspace detected, disabling atomic
17.137206] fuse: init (API version 7.31)
19.857871] Bluetooth: RFCOMM TTY layer initialized
19.857879] Bluetooth: RFCOMM socket layer initialized
19.857884] Bluetooth: RFCOMM ver 1.11
27.721423] wlp2s0: authenticate with d8:0d:17:5c:1e:07
27.772746] wlp2s0: send auth to d8:0d:17:5c:1e:07 (try 1/3)
27.775583] wlp2s0: authenticated
27.779714] wlp2s0: associate with d8:0d:17:5c:1e:07 (try 1/3)
27.883716] wlp2s0: associate with d8:0d:17:5c:1e:07 (try 2/3)
27.947783] wlp2s0: RX AssocResp from d8:0d:17:5c:1e:07 (capab=0x1411 status=0 aid=4)
27.950290] wlp2s0: associated
27.950365] ath: EEPROM regdomain: 0x8114
27.950365] ath: EEPROM indicates we should expect a country code
27.950366] ath: doing EEPROM country->regdmn map search
27.950366] ath: country maps to regdmn code: 0x37
27.950367] ath: Country alpha2 being used: DE
27.950368] ath: Regpair used: 0x37
27.950369] ath: regdomain 0x8114 dynamically updated by country element
28.004196] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
28.017681] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:0d:17:5c:1e:07
594.882801] wlp2s0: deauthenticating from d8:0d:17:5c:1e:07 by local choice (Reason: 3=DEAUTH_LEAVING)
595.744663] broken atomic modeset userspace detected, disabling atomic
611.385961] wlp2s0: authenticate with d8:0d:17:5c:1e:07
611.433688] wlp2s0: send auth to d8:0d:17:5c:1e:07 (try 1/3)
611.435486] wlp2s0: authenticated
611.439693] wlp2s0: associate with d8:0d:17:5c:1e:07 (try 1/3)
611.543770] wlp2s0: associate with d8:0d:17:5c:1e:07 (try 2/3)
611.604397] wlp2s0: RX AssocResp from d8:0d:17:5c:1e:07 (capab=0x1411 status=0 aid=4)
611.606916] wlp2s0: associated
611.606983] ath: EEPROM regdomain: 0x8114
611.606983] ath: EEPROM indicates we should expect a country code
611.606984] ath: doing EEPROM country->regdmn map search
611.606984] ath: country maps to regdmn code: 0x37
611.606985] ath: Country alpha2 being used: DE
611.606985] ath: Regpair used: 0x37
611.606986] ath: regdomain 0x8114 dynamically updated by country element
611.629306] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
611.697349] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:0d:17:5c:1e:07
1258.912000] process 'snapshot/usr/bin/grub2-mkrelpath' started with executable stack
1284.695293] wlp2s0: deauthenticating from d8:0d:17:5c:1e:07 by local choice (Reason: 3=DEAUTH_LEAVING)
1285.506074] broken atomic modeset userspace detected, disabling atomic
1301.558343] wlp2s0: authenticate with d8:0d:17:5c:1e:07
1301.605603] wlp2s0: send auth to d8:0d:17:5c:1e:07 (try 1/3)
1301.608540] wlp2s0: authenticated
1301.611674] wlp2s0: associate with d8:0d:17:5c:1e:07 (try 1/3)
1301.719667] wlp2s0: associate with d8:0d:17:5c:1e:07 (try 2/3)
1301.784724] wlp2s0: RX AssocResp from d8:0d:17:5c:1e:07 (capab=0x1411 status=0 aid=4)
1301.787582] wlp2s0: associated
1301.787713] ath: EEPROM regdomain: 0x8114
1301.787714] ath: EEPROM indicates we should expect a country code
1301.787715] ath: doing EEPROM country->regdmn map search
1301.787716] ath: country maps to regdmn code: 0x37
1301.787717] ath: Country alpha2 being used: DE
1301.787717] ath: Regpair used: 0x37
1301.787719] ath: regdomain 0x8114 dynamically updated by country element
1301.813268] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
1301.872646] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by d8:0d:17:5c:1e:07
7096.553848] usb 1-5: USB disconnect, device number 2
7096.554570] uvcvideo: Failed to resubmit video URB (-19).
7096.558565] uvcvideo: Failed to resubmit video URB (-19).
7096.562564] uvcvideo: Failed to resubmit video URB (-19).
7096.566564] uvcvideo: Failed to resubmit video URB (-19).
7096.570563] uvcvideo: Failed to resubmit video URB (-19).
7096.971652] usb 1-5: new high-speed USB device number 4 using xhci_hcd
7097.041255] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
7097.041263] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
7097.041268] usb 1-5: Product: Integrated_Webcam_HD
7097.041271] usb 1-5: Manufacturer: CN0FFMHCLOG0083FB5M2A01
7097.041274] usb 1-5: SerialNumber: 200901010001
7097.046142] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
7097.055746] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
7097.055753] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
7097.055757] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
7097.055761] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
7097.055765] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
7097.056045] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input32
7097.057789] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
7097.060325] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
7097.060330] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
7097.060333] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
7097.060336] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
7097.060616] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input33
7097.804135] usb 1-5: USB disconnect, device number 4
7099.031416] usb usb1-port5: Cannot enable. Maybe the USB cable is bad?
7099.851443] usb 1-5: new high-speed USB device number 6 using xhci_hcd
7099.918966] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=72.79
7099.918967] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
7099.918968] usb 1-5: Product: Integrated_Webcam_HD
7099.918969] usb 1-5: Manufacturer: CN0FFMHCLOG0083FB5M2A01
7099.918969] usb 1-5: SerialNumber: 200901010001
7099.922863] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
7099.930073] uvcvideo 1-5:1.0: Entity type for entity Integrated_Webcam_HD was not initialized!
7099.930074] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
7099.930075] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
7099.930076] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
7099.930077] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
7099.930127] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input34
7099.931229] uvcvideo: Found UVC 1.50 device Integrated_Webcam_HD (0bda:58f4)
7099.933231] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
7099.933232] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
7099.933233] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
7099.933234] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
7099.933275] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input35