Verify NVIDIA-bumblebee installation

Xorg.0.log

    29.100] 
X.Org X Server 1.16.1
Release Date: 2014-09-21
    29.100] X Protocol Version 11, Revision 0
    29.100] Build Operating System: openSUSE SUSE LINUX
    29.100] Current Operating System: Linux linux-14s3.site  3.16.7-24-desktop #1 SMP PREEMPT Mon Aug 3 14:37:06 UTC 2015 (ec183cc)  x86_64
    29.100] Kernel command line:  BOOT_IMAGE=/boot/vmlinuz-3.16.7-24-desktop  root=UUID=a45f2675-6c98-4f70-8b22-20ba303c2018 showopts apm=off noresume  edd=off powersaved=off nohz=off highres=off processor.max_cstate=1  nomodeset x11failsafe
    29.100] Build Date: 12 June 2015  07:55:09PM
    29.100]  
    29.100] Current version of pixman: 0.32.6
    29.100]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    29.100] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    29.100] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct  7 20:24:21 2015
    29.100] (==) Using config file: "/etc/X11/xorg.conf.install"
    29.100] (==) Using config directory: "/etc/X11/xorg.conf.d"
    29.100] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    29.114] (==) ServerLayout "Layout"
    29.114] (**) |-->Screen "vboxvideo" (0)
    29.114] (**) |   |-->Monitor "<default monitor>"
    29.114] (**) |   |-->Device "vboxvideo"
    29.114] (==) No monitor specified for screen "vboxvideo".
    Using a default monitor configuration.
    29.114] (**) |-->Screen "vmware" (1)
    29.114] (**) |   |-->Monitor "<default monitor>"
    29.114] (**) |   |-->Device "vmware"
    29.114] (==) No monitor specified for screen "vmware".
    Using a default monitor configuration.
    29.114] (**) |-->Screen "modesetting" (2)
    29.114] (**) |   |-->Monitor "<default monitor>"
    29.114] (**) |   |-->Device "modesetting"
    29.114] (==) No monitor specified for screen "modesetting".
    Using a default monitor configuration.
    29.114] (**) |-->Screen "fbdev" (3)
    29.114] (**) |   |-->Monitor "<default monitor>"
    29.115] (**) |   |-->Device "fbdev"
    29.115] (==) No monitor specified for screen "fbdev".
    Using a default monitor configuration.
    29.115] (**) |-->Screen "vesa" (4)
    29.115] (**) |   |-->Monitor "<default monitor>"
    29.115] (**) |   |-->Device "vesa"
    29.115] (==) No monitor specified for screen "vesa".
    Using a default monitor configuration.
    29.115] (==) Automatically adding devices
    29.115] (==) Automatically enabling devices
    29.115] (==) Automatically adding GPU devices
    29.281] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    29.281]     Entry deleted from font path.
    29.288] (==) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/ghostscript/,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins
    29.288] (==) ModulePath set to "/usr/lib64/xorg/modules"
    29.288] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    29.288] (II) Loader magic: 0x80ec80
    29.288] (II) Module ABI versions:
    29.288]     X.Org ANSI C Emulation: 0.4
    29.288]     X.Org Video Driver: 18.0
    29.288]     X.Org XInput driver : 21.0
    29.288]     X.Org Server Extension : 8.0
    29.291] (--) PCI:*(0:0:2:0) 8086:0116:1043:1682 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
    29.291] (II) LoadModule: "glx"
    29.318] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
    29.321] (II) Module glx: vendor="X.Org Foundation"
    29.321]     compiled for 1.16.1, module version = 1.0.0
    29.321]     ABI class: X.Org Server Extension, version 8.0
    29.321] (==) AIGLX enabled
    29.321] (II) LoadModule: "vboxvideo"
    29.371] (WW) Warning, couldn't open module vboxvideo
    29.371] (II) UnloadModule: "vboxvideo"
    29.371] (II) Unloading vboxvideo
    29.371] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
    29.371] (II) LoadModule: "vmware"
    29.371] (WW) Warning, couldn't open module vmware
    29.371] (II) UnloadModule: "vmware"
    29.371] (II) Unloading vmware
    29.371] (EE) Failed to load module "vmware" (module does not exist, 0)
    29.371] (II) LoadModule: "modesetting"
    29.372] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
    29.396] (II) Module modesetting: vendor="X.Org Foundation"
    29.396]     compiled for 1.16.1, module version = 0.9.0
    29.396]     Module class: X.Org Video Driver
    29.396]     ABI class: X.Org Video Driver, version 18.0
    29.396] (II) LoadModule: "fbdev"
    29.397] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
    29.400] (II) Module fbdev: vendor="X.Org Foundation"
    29.400]     compiled for 1.16.1, module version = 0.4.4
    29.400]     Module class: X.Org Video Driver
    29.400]     ABI class: X.Org Video Driver, version 18.0
    29.400] (II) LoadModule: "vesa"
    29.400] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
    29.401] (II) Module vesa: vendor="X.Org Foundation"
    29.401]     compiled for 1.16.1, module version = 2.3.3
    29.401]     Module class: X.Org Video Driver
    29.401]     ABI class: X.Org Video Driver, version 18.0
    29.401] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    29.401] (II) FBDEV: driver for framebuffer: fbdev
    29.401] (II) VESA: driver for VESA chipsets: vesa
    29.401] (++) using VT number 7

    29.401] (EE) open /dev/dri/card0: No such file or directory
    29.401] (WW) Falling back to old probe method for modesetting
    29.401] (EE) open /dev/dri/card0: No such file or directory
    29.401] (II) Loading sub module "fbdevhw"
    29.401] (II) LoadModule: "fbdevhw"
    29.402] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
    29.411] (II) Module fbdevhw: vendor="X.Org Foundation"
    29.411]     compiled for 1.16.1, module version = 0.0.2
    29.411]     ABI class: X.Org Video Driver, version 18.0
    29.411] (**) FBDEV(1): claimed PCI slot 0@0:2:0
    29.411] (II) FBDEV(1): using default device
    29.411] (WW) Falling back to old probe method for vesa
    29.411] (EE) Screen 0 deleted because of no matching config section.
    29.411] (II) UnloadModule: "modesetting"
    29.411] (II) FBDEV(0): Creating default Display subsection in Screen section
    "fbdev" for depth/fbbpp 24/32
    29.411] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
    29.411] (==) FBDEV(0): RGB weight 888
    29.411] (==) FBDEV(0): Default visual is TrueColor
    29.411] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
    29.411] (II) FBDEV(0): hardware: VESA VGA (video memory: 3072kB)
    29.411] (II) FBDEV(0): checking modes against framebuffer device...
    29.411] (II) FBDEV(0): checking modes against monitor...
    29.411] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
    29.411] (**) FBDEV(0):  Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
    29.411] (II) FBDEV(0): Modeline "current"x0.0   78.65  1024 1056  1184 1312  768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
    29.411] (==) FBDEV(0): DPI set to (96, 96)
    29.411] (II) Loading sub module "fb"
    29.411] (II) LoadModule: "fb"
    29.411] (II) Loading /usr/lib64/xorg/modules/libfb.so
    29.413] (II) Module fb: vendor="X.Org Foundation"
    29.413]     compiled for 1.16.1, module version = 1.0.0
    29.413]     ABI class: X.Org ANSI C Emulation, version 0.4
    29.413] (**) FBDEV(0): using shadow framebuffer
    29.413] (II) Loading sub module "shadow"
    29.413] (II) LoadModule: "shadow"
    29.413] (II) Loading /usr/lib64/xorg/modules/libshadow.so
    29.437] (II) Module shadow: vendor="X.Org Foundation"
    29.437]     compiled for 1.16.1, module version = 1.1.0
    29.437]     ABI class: X.Org ANSI C Emulation, version 0.4
    29.437] (II) UnloadModule: "vesa"
    29.437] (II) Unloading vesa
    29.437] (==) Depth 24 pixmap format is 32 bpp
    29.437] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
    29.437] (==) FBDEV(0): Backing store enabled
    29.437] (==) FBDEV(0): DPMS enabled
    29.437] (==) RandR enabled
    29.444] (II) AIGLX: Screen 0 is not DRI2 capable
    29.444] (EE) AIGLX: reverting to software rendering
    30.542] (II) AIGLX: Loaded and initialized swrast
    30.543] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    30.922] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    30.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    30.922] (**) Power Button: Applying InputClass "system-keyboard"
    30.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    30.922] (II) LoadModule: "evdev"
    30.923] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
    30.957] (II) Module evdev: vendor="X.Org Foundation"
    30.957]     compiled for 1.16.1, module version = 2.9.0
    30.957]     Module class: X.Org XInput Driver
    30.957]     ABI class: X.Org XInput driver, version 21.0
    30.957] (II) Using input driver 'evdev' for 'Power Button'
    30.957] (**) Power Button: always reports core events
    30.957] (**) evdev: Power Button: Device: "/dev/input/event6"
    30.958] (--) evdev: Power Button: Vendor 0 Product 0x1
    30.958] (--) evdev: Power Button: Found keys
    30.958] (II) evdev: Power Button: Configuring as keyboard
    30.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event6"
    30.958] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    30.958] (**) Option "xkb_rules" "evdev"
    30.958] (**) Option "xkb_model" "pc105"
    30.958] (**) Option "xkb_layout" "it"
    30.958] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    31.017] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
    31.017] (II) No input driver specified, ignoring this device.
    31.017] (II) This device may have been added with another device file.
    31.018] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    31.018] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    31.018] (**) Sleep Button: Applying InputClass "system-keyboard"
    31.018] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    31.018] (II) Using input driver 'evdev' for 'Sleep Button'
    31.018] (**) Sleep Button: always reports core events
    31.018] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    31.018] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    31.018] (--) evdev: Sleep Button: Found keys
    31.018] (II) evdev: Sleep Button: Configuring as keyboard
    31.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5"
    31.018] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
    31.018] (**) Option "xkb_rules" "evdev"
    31.018] (**) Option "xkb_model" "pc105"
    31.018] (**) Option "xkb_layout" "it"
    31.018] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    31.019] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event8)
    31.019] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
    31.019] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "system-keyboard"
    31.019] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
    31.020] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
    31.020] (**) USB 2.0 UVC VGA WebCam: always reports core events
    31.020] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event8"
    31.020] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5710
    31.020] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
    31.020] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
    31.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input15/event8"
    31.020] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 8)
    31.020] (**) Option "xkb_rules" "evdev"
    31.020] (**) Option "xkb_model" "pc105"
    31.020] (**) Option "xkb_layout" "it"
    31.020] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"