I am trying to mount a audio cd from the command line in a Computer with MikroOS Leap 15.4. When I use the command sudo gio mount -d /dev/sr0 gives the output gio: /dev/sr0: No volume for given ID. After cheking sudo dmesg | tail get the output:
[56191.955511] scsi 2:0:0:0: CD-ROM TS8XDVDS TRANSCEND 1.00 PQ: 0 ANSI: 0
[56191.963380] sr 2:0:0:0: [sr0] scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[56192.060609] sr 2:0:0:0: Attached scsi CD-ROM sr0
[56192.060849] sr 2:0:0:0: Attached scsi generic sg2 type 5
[56193.804461] r8169 0000:02:00.1 eth3: Link is Up - 1Gbps/Full - flow control off
As well when trying to get the contents with sudo cat /dev/sr0 I get the error cat: /dev/sr0: Input/output error, and after cheking sudo dmesg | tail get the output:
[58632.023830] sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
[58632.023835] sr 2:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
[58632.023839] sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 78 00 00 08 00 00 00
[58632.023842] blk_update_request: I/O error, dev sr0, sector 480 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[58632.031591] sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[58632.031604] sr 2:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
[58632.031611] sr 2:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
[58632.031616] sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00 00 00
[58632.031620] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[58632.031643] Buffer I/O error on dev sr0, logical block 0, async page read