sd on hp650

English Multimedia
1

Good evening … to all
i am a new user on forum for SUSE
i am work on suse with apache and php develop . So
i am a problem with a SD internal card not working in absouletely mode …
I am buy this Nb 650 with a distribution ubuntu and i changede with suse a last version

work all but this SD no…
i am reading a form and post for this question but …

this form is out a response … and i don t see the resolutionn …
http://forums.opensuse.org/english/get-technical-help-here/hardware/464840-internal-sd-card-reader-not-functioning-opensuse-11-4-hp-630-laptop-2.html

i am not professional in open source s.o but if you can helo me for this …
this a extract for # dmesg

    1.050540] ata1: SATA max UDMA/133 abar m2048@0x52607000 port 0x52607100 irq 40
    1.050542] ata2: DUMMY
    1.050545] ata3: SATA max UDMA/133 abar m2048@0x52607000 port 0x52607200 irq 40
    1.050546] ata4: DUMMY
    1.050621] libphy: Fixed MDIO Bus: probed
    1.050623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    1.050659] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    1.050663] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    1.050668] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    1.050683] ehci_hcd 0000:00:1a.0: debug port 2
    1.054575] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    1.054591] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x52609000
    1.059976] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    1.060010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    1.060012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    1.060014] usb usb1: Product: EHCI Host Controller
    1.060016] usb usb1: Manufacturer: Linux 3.7.10-1.4-desktop ehci_hcd
    1.060018] usb usb1: SerialNumber: 0000:00:1a.0
    1.060142] hub 1-0:1.0: USB hub found
    1.060147] hub 1-0:1.0: 2 ports detected
    1.060315] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    1.060319] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    1.060324] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    1.060338] ehci_hcd 0000:00:1d.0: debug port 2
    1.064247] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    1.064262] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x52608000
    1.069972] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    1.070004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    1.070006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    1.070008] usb usb2: Product: EHCI Host Controller
    1.070010] usb usb2: Manufacturer: Linux 3.7.10-1.4-desktop ehci_hcd
    1.070011] usb usb2: SerialNumber: 0000:00:1d.0
    1.070114] hub 2-0:1.0: USB hub found
    1.070118] hub 2-0:1.0: 2 ports detected
    1.070251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    1.070267] uhci_hcd: USB Universal Host Controller Interface driver
    1.070318] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    1.078939] serio: i8042 KBD port at 0x60,0x64 irq 1
    1.078971] serio: i8042 AUX port at 0x60,0x64 irq 12
    1.079055] mousedev: PS/2 mouse device common for all mice
    1.079150] rtc_cmos 00:06: RTC can wake from S4
    1.079280] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    1.079311] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    1.079343] cpuidle: using governor ladder
    1.079378] cpuidle: using governor menu
    1.079382] ledtrig-cpu: registered to indicate activity on CPUs
    1.079384] EFI Variables Facility v0.08 2004-May-17
    1.084278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    1.354967] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    1.356417] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7A0, max UDMA/100
    1.356420] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    1.357887] ata1.00: configured for UDMA/100
    1.357983] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
    1.358194] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    1.358197] sd 0:0:0:0: [sda] 4096-byte physical blocks
    1.358234] sd 0:0:0:0: [sda] Write Protect is off
    1.358237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    1.358253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    1.361902] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    1.410882]  sda: sda1 sda2 sda3 sda4
    1.411131] sd 0:0:0:0: [sda] Attached SCSI disk
    1.476272] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    1.476274] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    1.476425] hub 1-1:1.0: USB hub found
    1.476522] hub 1-1:1.0: 4 ports detected
    1.579458] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    1.662840] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    1.667366] ata3.00: ATAPI: hp       CDDVDW SN-208DB, HH01, max UDMA/100
    1.669864] ata3.00: configured for UDMA/100
    1.674817] scsi 2:0:0:0: CD-ROM            hp       CDDVDW SN-208DB  HH01 PQ: 0 ANSI: 5
    1.693203] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
    1.693206] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    1.693353] hub 2-1:1.0: USB hub found
    1.693452] hub 2-1:1.0: 4 ports detected
    1.674934] ACPI: Invalid Power Resource to register!
    1.737583] Efi pstore disabled, enforce via pstore.backend=efiOn a broken BIOS, this can severely harm your system
    1.737586] Only enable efi based pstore when you know what you are doing<6>    1.737752] usbcore: registered new interface driver usbhid

One information for me ? please …
Thank.

2

Hi
The SD controller should be in the output of the following command;


lsusb

Can you post the output from this.

3

And please tell us which version of openSUSE you have running. That basic information is not available in your post.

4

Sorry for the time , but
I thought that I be notified of an email when inserivano answers
only now I see your kind answers …

So to console at lsub

webnova:/home/npget # lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 064e:e263 Suyin Corp. 
webnova:/home/npget # ^C

And the i installed the last version 12.3 darthmound i link th img of screen
http://www.stilediroma.com/novagestoriginal/archivioimmagini/4/0-errorissimo/0-SUSE/00_1_ec138da7b9(www.stilediroma.com).png

And i link the output for antother command : lspci

http://www.stilediroma.com/SerioMAnontroppo/NEWS/34.newtrade.html

Thank and regards

5

Hi
And you sure it’s (the SD card reader) enabled in the BIOS?

On this HP 4525s it comes to life when I plug in an sd card;


lsusb

Bus 002 Device 005: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
6

oh yes of course, but in the bios of this notebook there are very few things to customize boot, the fan, the sortcut boot, and nothing else. A splash screen that shows the bios know nonn is windows sd, smart, scsi, are not in any of the rumors around the bios … I’m still thinking about dropping the use of device now … I was wrong not to check the correct operation of the sd when there was ubuntu … is just that I do not like ubuntu and I switched to SUSE I prefer … Thank …,