Problem with DVB-S2 TV card

I’ve got a problem with my TechnoTrend S2-3200 DVB-S2 TV card in openSUSE 11.0 x64.

After the module and firmware install, i started Yast2>Hardware>TV Card,
but yast2 doesen’t find my TV card, and kdetv
reports that it can’t find any tv card. What can i do ?

My system :
cpu : AMD X2 6400+
mainboard : Asus M3A32-MVP deluxe
graphics : Nvidia 8800GT
ram : 4GB DDR2-800

I have installed the drivers and firmware by using this HowTo:

Some codecs like this :

Some system outputs:
lspci -v

05:05.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH S2-3200
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at febffc00 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_ci dvb
Kernel modules: budget-ci


ttpci_eeprom 19328 1 budget_core
ir_common 61700 1 budget_ci
i2c_core 45344 8 lnbp21,stb6100,stb0899,budget_ci,budget_core,nvidia,ttpci_eeprom,i2c_piix4


saa7146: register extension ‘budget_ci dvb’.
ACPI: PCI Interrupt 0000:05:05.0[A] → GSI 20 (level, low) → IRQ 20
saa7146: found saa7146 @ mem ffffc20001056c00 (revision 1, irq 20) (0x13c2,0x1019).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
adapter has MAC addr = (…)
input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:14.4/0000:05:05.0/input/input6
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
DVB: registering frontend 0 (STB0899 Multistandard)…