October 2025 Screenshots

[malcolmlewis]

Here you go for a starter

It’s a server setup I just wanted to test Leap 16… It’s using a AVAGO MR9440-8i RAID Controller, so sda is two 128GB SPCC SSD’s in RAID 1 and sdb is two Seagate Exos 7EB 4TB drives in RAID 1 for rsync backups.

Connection is via the flatpak Cockpit client on my Tumbleweed desktop, nothing connected to it apart from power and a network cable.

Edit: Add more info…

fwupdmgr security

Host Security ID: HSI:2 (v2.0.6)

HSI-1
✔ BIOS firmware updates:         Enabled
✔ csme manufacturing mode:       Locked
✔ csme override:                 Locked
✔ csme v0:11.12.97.2614:         Valid
✔ Platform debugging:            Disabled
✔ SPI write:                     Disabled
✔ SPI lock:                      Enabled
✔ SPI BIOS region:               Locked
✔ Supported CPU:                 Valid
✔ TPM empty PCRs:                Valid
✔ TPM v2.0:                      Found
✔ UEFI bootservice variables:    Locked
✔ UEFI platform key:             Valid
✔ UEFI secure boot:              Enabled

HSI-2
✔ Intel BootGuard ACM protected: Valid
✔ Intel BootGuard:               Enabled
✔ Intel BootGuard OTP fuse:      Valid
✔ Intel BootGuard verified boot: Valid
✔ Intel GDS mitigation:          Enabled
✔ IOMMU:                         Enabled
✔ Platform debugging:            Locked
✔ TPM PCR0 reconstruction:       Valid

HSI-3
✔ Intel BootGuard error policy:  Valid
✘ CET Platform:                  Not supported
✘ Pre-boot DMA protection:       Disabled
✘ Suspend-to-idle:               Disabled
✘ Suspend-to-ram:                Enabled

HSI-4
✔ SMAP:                          Enabled
✘ Encrypted RAM:                 Not supported

Runtime Suffix -!
✔ fwupd plugins:                 Untainted
✔ Linux kernel lockdown:         Enabled
✔ Linux swap:                    Disabled
✔ Linux kernel:                  Untainted

inxi -Fxxz

System:
  Kernel: 6.12.0-160000.5-default arch: x86_64 bits: 64 compiler: gcc v: 13.4.0
  Console: pty pts/0 Distro: openSUSE Leap 16.0
Machine:
  Type: Desktop System: Dell product: Precision 5820 Tower v: N/A serial: <filter> Chassis:
    type: 3 serial: <filter>
  Mobo: Dell model: 0TVW7J v: A09 serial: <filter> part-nu: 0738 UEFI: Dell v: 2.42.0
    date: 03/17/2025
CPU:
  Info: quad core model: Intel Xeon W-2102 bits: 64 type: MCP arch: Skylake rev: 4 cache:
    L1: 256 KiB L2: 4 MiB L3: 8.2 MiB
  Speed (MHz): avg: 1200 min/max: 1200/2900 cores: 1: 1200 2: 1200 3: 1200 4: 1200
    bogomips: 23199
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: NVIDIA GP107GL [Quadro P400] vendor: Dell driver: N/A arch: Pascal pcie:
    speed: 2.5 GT/s lanes: 16 bus-ID: 65:00.0 chip-ID: 10de:1cb3
  Display: unspecified server: N/A driver: N/A tty: 169x29
  Monitor-1: Unknown-1 size-res: N/A in console
  API: OpenGL Message: GL data unavailable in console for root.
  API: Vulkan Message: No Vulkan data available.
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
    bus-ID: 00:1f.3 chip-ID: 8086:a2f0
  Device-2: NVIDIA GP107GL High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel
    pcie: speed: 2.5 GT/s lanes: 16 bus-ID: 65:00.1 chip-ID: 10de:0fb9
  API: ALSA v: k6.12.0-160000.5-default status: kernel-api
Network:
  Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
    chip-ID: 8086:15e3
  IF: em1 state: up speed: 1000 Mbps duplex: full mac: <filter>
RAID:
  Hardware-1: Broadcom / LSI MegaRAID Tri-Mode SAS3408 driver: megaraid_sas v: 07.734.00.00-rc1
    bus-ID: b3:00.0 chip-ID: 1000:0017
Drives:
  Local Storage: total: 3.75 TiB used: 2.99 GiB (0.1%)
  ID-1: /dev/sda vendor: LSI model: MR9440-8i size: 118.72 GiB speed: <unknown> serial: N/A
  ID-2: /dev/sdb vendor: LSI model: MR9440-8i size: 3.64 TiB speed: <unknown> serial: N/A
Partition:
  ID-1: / size: 114.72 GiB used: 2.98 GiB (2.6%) fs: btrfs dev: /dev/sda2
  ID-2: /boot/efi size: 3.99 GiB used: 6 MiB (0.1%) fs: vfat dev: /dev/sda1
  ID-3: /home size: 114.72 GiB used: 2.98 GiB (2.6%) fs: btrfs dev: /dev/sda2
  ID-4: /opt size: 114.72 GiB used: 2.98 GiB (2.6%) fs: btrfs dev: /dev/sda2
  ID-5: /var size: 114.72 GiB used: 2.98 GiB (2.6%) fs: btrfs dev: /dev/sda2
Swap:
  ID-1: swap-1 type: zram size: 790.6 MiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 32.0 C mobo: 27.0 C
  Fan Speeds (rpm): cpu: 1000 fan-2: 757 fan-3: 625 fan-4: 1123
Info:
  Memory: total: 32 GiB note: est. available: 30.88 GiB used: 908.9 MiB (2.9%)
  Processes: 164 Power: uptime: 1h 11m wakeups: 0 Init: systemd v: 257 default: multi-user
  Packages: pm: rpm pkgs: N/A note: see --rpm Compilers: N/A Shell: Bash v: 5.2.37
    running-in: pty pts/0 inxi: 3.3.36

[malcolmlewis]

And another for good luck

[racoonez]

Don’t blame me about the DE hopping, Happy October/Autumn.

[conram]

[iAssimilated]

My 2013 Mac Pro:

[csrinivas]

[conram]

20 Years using Xfce.

[knurpht]

[NadaCAT]

My first time using tiling window manager, I think I’m leaving plasma over this.

[nemonix]

[conram]

My old work desktop

[malcolmlewis]

A little different screen shot, this is my current WIP with Leap 16.0, k3s and Ollama on open-webui;

System Configuration

• Operating System: openSUSE Leap 16.0
• Motherboard: Intel DQ77MK
• CPU: Xeon Quad Core E3-1245 V2 @ 3.40GHz
• RAM: 32GB Dual Channel @ 1600 MT/s
• Storage: 128GB Silicon Power M.2 SSD
• Compute GPU: Nvidia Tesla P4

[racoonez]

Wait, about 154 mb for hyprland only?. I’m very interested
But on the other I don’t know if TWM will fit to my workflow which includes working with Audio (DAW, plugins for that because they open in a separated floating window).

[racoonez]

Hello again everyone, I just couldn’t wait for October to finish.
I installed khronkite and panel colorizer. A little progress.
Don’t know if I’ll keep this accent color.