Hello.
Please advise how to setup N-trig support on SuSE 11.4.
It works out of the box on 11.3, but now stylus doesn’t work…
Hi
Is the hid-ntrig module loaded? Do you see the device appear in the output of the dmesg command?
So details on your system would help as well and what desktop environment are you running?
Here is a problem. hid-ntrig is not a module anymore, it is compiled in kernel-desktop.
ntrig catched by usbhid module by default, I can unbind/bind it from usbhid.
cd /sys/bus/usb/drivers/usbhid
echo 7-2:1.0 > unbind
echo 7-2:1.1 > unbind
But can’t bind to ntrig driver
cd /sys/bus/hid/drivers/ntrig
echo 7-2:1.0 > bindbash: echo: write error: No such device
echo 7-2:1.1 > bind
bash: echo: write error: No such device
After binding to usbhid only finger works, stylus doesn’t.
cd /sys/bus/usb/drivers/usbhid
echo 7-2:1.0 > bind
echo 7-2:1.1 > bind
Here is my uname and dmesg after binding.
Linux clarity 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
1504.728054] ntrig 0003:1B96:0001.0007: hidraw0: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:14.5-2/input0
1504.729722] ntrig 0003:1B96:0001.0007: Firmware version: 4.6.5.8.5 (1808 05a1)
1504.738423] input: N-trig DuoSense as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input25
1504.738643] input: N-trig DuoSense as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input26
1504.738780] input: N-trig DuoSense as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input27
1504.739101] ntrig 0003:1B96:0001.0008: input,hidraw1: USB HID v1.10 Device [N-trig DuoSense] on usb-0000:00:14.5-2/input1
1504.741079] ntrig 0003:1B96:0001.0008: Firmware version: 4.6.5.8.5 (1808 05a1)
On Sat, 2011-04-09 at 12:06 +0000, sergey1369 wrote:
> Here is a problem. hid-ntrig is not a module anymore, it is compiled in
> kernel-desktop.
> ntrig catched by usbhid module by default, I can unbind/bind it from
> usbhid.
Hi
Are there any entries for your ntrig device
in /etc/X11/xorg.con.d/10-wacom.conf
Else try adding the following at the end of the file;
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "HID 1b96:0001|N-Trig Pen"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button2" "3"
EndSection
–
Cheers Malcolm °¿° (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.32.29-0.3-default
up 2 days 20:53, 2 users, load average: 2.35, 1.44, 1.26
GPU GeForce 8600 GTS Silent - Driver Version: 260.19.26
Yes, I have it.
Here is my xorg.0.log.
26.838] (II) config/udev: Adding input device N-Trig Pen (/dev/input/event2) 26.838] (**) N-Trig Pen: Applying InputClass "evdev tablet catchall" 26.838] (**) N-Trig Pen: Applying InputClass "Wacom N-Trig class" 26.838] (**) Option "Device" "/dev/input/event2" 26.841] (II) N-Trig Pen: type not specified, assuming 'stylus'. 26.841] (II) N-Trig Pen: other types will be automatically added. 26.841] (**) N-Trig Pen stylus: always reports core events 26.841] (**) Option "Button2" "3" 26.841] (--) N-Trig Pen stylus: using pressure threshold of 27 for button 1 26.841] (--) N-Trig Pen stylus: Wacom Unknown USB tablet maxX=9600 maxY=7200 maxZ=256 resX=1016 resY=1016 tilt=enabled 26.841] (II) N-Trig Pen stylus: hotplugging dependent devices. 26.841] (**) N-Trig Pen eraser: Applying InputClass "evdev tablet catchall" 26.841] (**) N-Trig Pen eraser: Applying InputClass "Wacom N-Trig class" 26.841] (**) Option "Device" "/dev/input/event2" 26.844] (**) N-Trig Pen eraser: always reports core events 26.844] (**) Option "Button2" "3" 26.844] (--) N-Trig Pen eraser: Wacom Unknown USB tablet maxX=9600 maxY=7200 maxZ=256 resX=1016 resY=1016 tilt=enabled 26.847] (II) XINPUT: Adding extended input device "N-Trig Pen eraser" (type: ERASER) 26.847] (--) N-Trig Pen eraser: top X=0 top Y=0 bottom X=9600 bottom Y=7200 resol X=1016 resol Y=1016 26.858] (II) N-Trig Pen stylus: hotplugging completed. 26.861] (II) XINPUT: Adding extended input device "N-Trig Pen stylus" (type: STYLUS) 26.861] (--) N-Trig Pen stylus: top X=0 top Y=0 bottom X=9600 bottom Y=7200 resol X=1016 resol Y=1016 26.862] (II) config/udev: Adding input device N-Trig Pen (/dev/input/mouse1) 26.862] (II) No input driver/identifier specified (ignoring) 26.863] (II) config/udev: Adding input device N-Trig MultiTouch (/dev/input/event3) 26.863] (**) N-Trig MultiTouch: Applying InputClass "evdev touchscreen catchall" 26.864] (**) N-Trig MultiTouch: always reports core events 26.864] (**) N-Trig MultiTouch: Device: "/dev/input/event3" 26.868] (--) N-Trig MultiTouch: Found absolute axes 26.868] (--) N-Trig MultiTouch: Found x and y absolute axes 26.868] (--) N-Trig MultiTouch: Found absolute touchscreen 26.868] (II) N-Trig MultiTouch: Configuring as touchscreen 26.868] (**) N-Trig MultiTouch: YAxisMapping: buttons 4 and 5 26.868] (**) N-Trig MultiTouch: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 26.868] (II) XINPUT: Adding extended input device "N-Trig MultiTouch" (type: TOUCHSCREEN) 26.868] (II) N-Trig MultiTouch: initialized for absolute axes. 26.869] (II) config/udev: Adding input device N-Trig MultiTouch (/dev/input/mouse2) 26.869] (II) No input driver/identifier specified (ignoring) 26.870] (II) config/udev: Adding input device N-Trig Touchscreen (/dev/input/event4) 26.870] (**) N-Trig Touchscreen: Applying InputClass "evdev touchscreen catchall" 26.870] (**) N-Trig Touchscreen: always reports core events 26.870] (**) N-Trig Touchscreen: Device: "/dev/input/event4" 26.874] (--) N-Trig Touchscreen: Found absolute axes 26.874] (--) N-Trig Touchscreen: Found x and y absolute axes 26.874] (--) N-Trig Touchscreen: Found absolute touchscreen 26.874] (II) N-Trig Touchscreen: Configuring as touchscreen 26.874] (**) N-Trig Touchscreen: YAxisMapping: buttons 4 and 5 26.874] (**) N-Trig Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 26.874] (II) XINPUT: Adding extended input device "N-Trig Touchscreen" (type: TOUCHSCREEN) 26.874] (II) N-Trig Touchscreen: initialized for absolute axes. 26.875] (II) config/udev: Adding input device N-Trig Touchscreen (/dev/input/mouse3)
Hi
So was it an upgrade from 11.3, or a fresh install?
I feel a bug report may be in order for this, since it worked in 11.3…
openSUSE:Submitting bug reports - openSUSE
You also need to follow this as well, since it’s X related;
openSUSE:Bugreport X - openSUSE
It was upgrade.
Hi
I would submit a bug, if you can post back the bug number, I will add myself to the CC list.
I doesn’t find similar bugs and fill a new one. It’s number 686498. Unsure is it x11 or kernel related, marked as kernel. You can take a look and submit.