Good afternoon. I have been running openSuse 15.5 on:
Dell Precision 5530, DellPowerEdge 530XD, Dell PowerEdge 730 XD and A lenovo laptop. After the updates from Wednesday, 2024-Jun-05, None of my openSuse computers are accessing the multiple screens, Actually all of them boot into the command prompt. Can someone please assist. My sons Dell runs Fedora 40 KDE and it work with the multiple screens. The fedora seems to run KDE 6.
Post:
zypper lr -d
zypper se -si nvidia
Repository : Time since last refresh
KDE Applications : 3 min 39 s
KDE Framework 5 : 3 min 38 s
KDE Framework 6 : 3 min 38 s
KDE Optional : 3 min 37 s
QT5 : 3 min 20 s
QT6 : 3 min 19 s
dell-system-update_dependent : 3 min 8 s
dell-system-update_independent : 3 min 7 s
nVidia Graphics Drivers : 3 min 7 s
Packman Repository : 3 min 6 s
google-chrome : 3 min 5 s
UrBackup (15.5) : 3 min 2 s
Libdvdcss Repository : 3 min 1 s
Update repository of openSUSE Backports : 3 min 1 s
Non-OSS Repository : 3 min 0 s
Open H.264 Codec (openSUSE Leap) : 3 min 0 s
Main Repository : 2 min 59 s
Update repository with updates from SUSE Linux Enterprise 15 : 2 min 58 s
Main Update Repository : 2 min 57 s
Update Repository (Non-Oss) : 2 min 57 s
Note: Running with user privileges. From time to time run 'zypper refresh' as root to make sure
the repository metadata are complete and up-to-date.
Loading repository data…
Reading installed packages…
S | Name | Type | Version | Arch | Repository
—±--------------------------------±--------±-----------------------------±-------±------------------------------------------------------------
i+ | kernel-firmware-nvidia | package | 20230724-150500.3.9.1 | noarch | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.78-150500.11.26.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.67-150500.11.21.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.54.14-150500.11.18.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 545.29.06-150500.11.15.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | openSUSE-repos-Leap-NVIDIA | package | 20230804.41e41a9-lp155.2.6.1 | x86_64 | Main Update Repository
I have never done this before, but I get the error ‘only 2 links per post allowed’. How do i get the zypper lr -d response from my ‘konsole’ to you? It is also to big for a screenshot
Being the idiot I am, I have just hit update on the Dell Latitude E6540. SAme problem. Boots into console, when I run startx, it refuses to go to Plasme/KDDE but gives me Gnome. I believe the update had ‘updates’ to the kernel. It could be why 15.6 RC also gives me the same issues?
Therefore another question arises. How do I ‘roll-back’ the update that I just did?
When you are asked for command output always:
- include the command prompt & command requested
- include the output
- include the following command prompt
- enclose all of it within PRE tags using the icon above the input window, or between two rows of only the three characters ~~~
#4 preserves the formatting of the original screen output. #1-#3 make clear whether what we are looking at is what was requested or offered.
Thank you very much. Let me try again:
piet@localhost:~> zypper se -si nvidia
Repository : Time since last refresh
KDE Applications : 3 min 39 s
KDE Framework 5 : 3 min 38 s
KDE Framework 6 : 3 min 38 s
KDE Optional : 3 min 37 s
QT5 : 3 min 20 s
QT6 : 3 min 19 s
dell-system-update_dependent : 3 min 8 s
dell-system-update_independent : 3 min 7 s
nVidia Graphics Drivers : 3 min 7 s
Packman Repository : 3 min 6 s
google-chrome : 3 min 5 s
UrBackup (15.5) : 3 min 2 s
Libdvdcss Repository : 3 min 1 s
Update repository of openSUSE Backports : 3 min 1 s
Non-OSS Repository : 3 min 0 s
Open H.264 Codec (openSUSE Leap) : 3 min 0 s
Main Repository : 2 min 59 s
Update repository with updates from SUSE Linux Enterprise 15 : 2 min 58 s
Main Update Repository : 2 min 57 s
Update Repository (Non-Oss) : 2 min 57 s
Note: Running with user privileges. From time to time run 'zypper refresh' as root to make sure
the repository metadata are complete and up-to-date.
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+---------------------------------+---------+------------------------------+--------+-------------------------------------------------------------
i+ | kernel-firmware-nvidia | package | 20230724-150500.3.9.1 | noarch | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.78-150500.11.26.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.67-150500.11.21.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.54.14-150500.11.18.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 545.29.06-150500.11.15.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | openSUSE-repos-Leap-NVIDIA | package | 20230804.41e41a9-lp155.2.6.1 | x86_64 | Main Update Repository
piet@localhost:~> zypper lr -d
# | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service
---+----------------------------------------------+----------------------------------------------------------------------+---------+-----------+---------+----------+--------+---------------------------------------------------------------------------------------------------------+--------
1 | KDE_Applications | KDE Applications | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Applications/KDE_Frameworks5_openSUSE_Leap_15.5/ |
2 | KDE_Framework_5 | KDE Framework 5 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Frameworks5/openSUSE_Leap_15.5/ |
3 | KDE_Framework_6 | KDE Framework 6 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Frameworks/openSUSE_Leap_15.5/ |
4 | KDE_Optional | KDE Optional | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Extra/KDE_Applications_openSUSE_Leap_15.5/ |
5 | QT5 | QT5 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Qt5/openSUSE_Leap_15.5/ |
6 | QT6 | QT6 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Qt6/openSUSE_Leap_15.6/ |
7 | dell-system-update_dependent | dell-system-update_dependent | Yes | (r ) Yes | Yes | 99 | rpm-md | https://linux.dell.com/repo/hardware/dsu/mirrors.cgi/osname=suse15&basearch=x86_64&native=1&redirpath=/ |
8 | dell-system-update_independent | dell-system-update_independent | Yes | (r ) Yes | Yes | 99 | rpm-md | https://linux.dell.com/repo/hardware/dsu/os_independent |
9 | download.nvidia.com-$releasever | nVidia Graphics Drivers | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.nvidia.com/opensuse/leap/15.5 |
10 | ftp.gwdg.de-openSUSE_Leap_$releasever | Packman Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.5/ |
11 | google-chrome | google-chrome | Yes | (r ) Yes | Yes | 99 | rpm-md | https://dl.google.com/linux/chrome/rpm/stable/x86_64 |
12 | home_uroni | UrBackup (15.5) | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/home:/uroni/15.5/ |
13 | openSUSE-Leap-15.5-1 | openSUSE-Leap-15.5-1 | No | ---- | ---- | 90 | rpm-md | cd:/?devices=/dev/disk/by-id/usb-HL-DT-ST_DVDRAM_GP08LU10_P01081205200543-0:0 |
14 | opensuse-guide.org-openSUSE_Leap_$releasever | Libdvdcss Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_15.5/ |
15 | repo-backports-debug-update | Update repository of openSUSE Backports (Debug) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/update/leap/15.5/backports_debug/ |
16 | repo-backports-update | Update repository of openSUSE Backports | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/backports/ |
17 | repo-debug | Debug Repository | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/distribution/leap/15.5/repo/oss/ |
18 | repo-debug-non-oss | Debug Repository (Non-OSS) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/distribution/leap/15.5/repo/non-oss/ |
19 | repo-debug-update | Update Repository (Debug) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/update/leap/15.5/oss/ |
20 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/update/leap/15.5/non-oss/ |
21 | repo-non-oss | Non-OSS Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/leap/15.5/repo/non-oss/ |
22 | repo-openh264 | Open H.264 Codec (openSUSE Leap) | Yes | (r ) Yes | Yes | 99 | rpm-md | http://codecs.opensuse.org/openh264/openSUSE_Leap/ |
23 | repo-oss | Main Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/leap/15.5/repo/oss/ |
24 | repo-sle-debug-update | Update repository with updates from SUSE Linux Enterprise 15 (Debug) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/update/leap/15.5/sle/ |
25 | repo-sle-update | Update repository with updates from SUSE Linux Enterprise 15 | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/sle/ |
26 | repo-source | Source Repository | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/source/distribution/leap/15.5/repo/oss/ |
27 | repo-update | Main Update Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/oss/ |
28 | repo-update-non-oss | Update Repository (Non-Oss) | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/non-oss/ |
piet@localhost:~>
Dell models numbers usually are actually model line numbers, which tell us nothing about the hardware they include. When having trouble with display output, we usually need some information about graphics hardware. A particularly good way to do that is input/output from command inxi -GSaz run from within X. It can be used when X not starting (only a display prompt) is the problem. Inxi just can’t provide as much information that way.
How many displays are each computer connected to? Are multiple computers physically connected to any one display? If yes, is this with multiple displays? Is only one computer at a time doing this, connected to the same group of displays? Some displays object to having multiple displays physically connected at the same time. A dock made for use with a laptop may not work as expected when used with a desktop PC.
Given what you’re describing, it really amounts to multiple questions. It’s probably best to choose one to focus on, get it solved, then move on to another. It’s difficult to imagine multiple computers all exhibiting exactly the same problem, when a mass of others have reported no similar trouble. I updated this 15.5 2 days ago, and it’s working just fine. Do you do some special configuration on each of your computers that you can think might possibly be involved with any graphics issue?
It’s best to either copy directly from Konsole, or if there is a problem doing that, redirect output to a file, and either attach the file, or paste its content:
zypper lr -d > someuniquefilename-filenamedoesnotmatter.txt
Please do not try to substitute an image for copied and pasted output except when capturing a screenshot is the only way possible to get the info, such as boot screen messages.
Please, all zypper commands should be run "as root ".
1 Like
Sorry about the ‘root’ thing. Here is the one with me as root:
piet@localhost:~> su
Password:
localhost:/home/piet # zypper -lr -d
The flag l is not known.
localhost:/home/piet # zypper se -si nvidia
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+---------------------------------+---------+------------------------------+--------+-------------------------------------------------------------
i+ | kernel-firmware-nvidia | package | 20230724-150500.3.9.1 | noarch | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.78-150500.11.26.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.67-150500.11.21.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 550.54.14-150500.11.18.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | kernel-firmware-nvidia-gspx-G06 | package | 545.29.06-150500.11.15.1 | x86_64 | Update repository with updates from SUSE Linux Enterprise 15
i+ | openSUSE-repos-Leap-NVIDIA | package | 20230804.41e41a9-lp155.2.6.1 | x86_64 | Main Update Repository
localhost:/home/piet #
It is
zypper lr -d
I know computers are very inhuman, but computer systems are very bad in interpreting what is not said, or said wrongly. Either use copy/paste, or check and re-check what you are typing. Every character counts.
And then, not your fault, but I guess using lines with ~~~ is not the best idea because I see the lines cut off at the end. Better use ``` (the same key, but without the Shift) or use the </> button from the tool bar of the post editor.
And last, but not least, please always use
su -
and not su . Read the man page.
Thank you. It is not only my Dell servers but also my ‘brand new’ Lenovo and Dell 5530 laptops that are exhibiting this problem. The Servers, 530XD and 730 XD are both connected to their own screens. = (x3) each. The Lenovo and Dell laptops, just mentioned, are still just being setup, so I havent added multiple displays. The Dell Lattitude E6540, there are 2 of them, one I just updated and it stopped working, have docks for the financial people, they each (E6540) connect to one each additional Samsung 27" monitors
In any case, I see you have a lot of extra repositories, special KDE ones. I do not know why you need them, but that could be the source of your problem.
1 Like
Sorry about the lr thing, I am a bit ‘brain dead’ at the moment. A lot of computers have gone down here and I am trying to restore what I can before Monday.
localhost:/home/piet # zypper lr -d
# | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service
---+----------------------------------------------+----------------------------------------------------------------------+---------+-----------+---------+----------+--------+---------------------------------------------------------------------------------------------------------+--------
1 | KDE_Applications | KDE Applications | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Applications/KDE_Frameworks5_openSUSE_Leap_15.5/ |
2 | KDE_Framework_5 | KDE Framework 5 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Frameworks5/openSUSE_Leap_15.5/ |
3 | KDE_Framework_6 | KDE Framework 6 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Frameworks/openSUSE_Leap_15.5/ |
4 | KDE_Optional | KDE Optional | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Extra/KDE_Applications_openSUSE_Leap_15.5/ |
5 | QT5 | QT5 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Qt5/openSUSE_Leap_15.5/ |
6 | QT6 | QT6 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/KDE:/Qt6/openSUSE_Leap_15.6/ |
7 | dell-system-update_dependent | dell-system-update_dependent | Yes | (r ) Yes | Yes | 99 | rpm-md | https://linux.dell.com/repo/hardware/dsu/mirrors.cgi/osname=suse15&basearch=x86_64&native=1&redirpath=/ |
8 | dell-system-update_independent | dell-system-update_independent | Yes | (r ) Yes | Yes | 99 | rpm-md | https://linux.dell.com/repo/hardware/dsu/os_independent |
9 | download.nvidia.com-$releasever | nVidia Graphics Drivers | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.nvidia.com/opensuse/leap/15.5 |
10 | ftp.gwdg.de-openSUSE_Leap_$releasever | Packman Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.5/ |
11 | google-chrome | google-chrome | Yes | (r ) Yes | Yes | 99 | rpm-md | https://dl.google.com/linux/chrome/rpm/stable/x86_64 |
12 | home_uroni | UrBackup (15.5) | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/home:/uroni/15.5/ |
13 | openSUSE-Leap-15.5-1 | openSUSE-Leap-15.5-1 | No | ---- | ---- | 90 | rpm-md | cd:/?devices=/dev/disk/by-id/usb-HL-DT-ST_DVDRAM_GP08LU10_P01081205200543-0:0 |
14 | opensuse-guide.org-openSUSE_Leap_$releasever | Libdvdcss Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_15.5/ |
15 | repo-backports-debug-update | Update repository of openSUSE Backports (Debug) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/update/leap/15.5/backports_debug/ |
16 | repo-backports-update | Update repository of openSUSE Backports | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/backports/ |
17 | repo-debug | Debug Repository | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/distribution/leap/15.5/repo/oss/ |
18 | repo-debug-non-oss | Debug Repository (Non-OSS) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/distribution/leap/15.5/repo/non-oss/ |
19 | repo-debug-update | Update Repository (Debug) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/update/leap/15.5/oss/ |
20 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/update/leap/15.5/non-oss/ |
21 | repo-non-oss | Non-OSS Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/leap/15.5/repo/non-oss/ |
22 | repo-openh264 | Open H.264 Codec (openSUSE Leap) | Yes | (r ) Yes | Yes | 99 | rpm-md | http://codecs.opensuse.org/openh264/openSUSE_Leap/ |
23 | repo-oss | Main Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/leap/15.5/repo/oss/ |
24 | repo-sle-debug-update | Update repository with updates from SUSE Linux Enterprise 15 (Debug) | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/debug/update/leap/15.5/sle/ |
25 | repo-sle-update | Update repository with updates from SUSE Linux Enterprise 15 | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/sle/ |
26 | repo-source | Source Repository | No | ---- | ---- | 99 | N/A | http://download.opensuse.org/source/distribution/leap/15.5/repo/oss/ |
27 | repo-update | Main Update Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/oss/ |
28 | repo-update-non-oss | Update Repository (Non-Oss) | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.5/non-oss/ |
localhost:/home/piet #
The KDE / QT5 and QT6 Repositories where added after the disaster. They dont exist on the new laptop installlations or the 730XD servers.I have been trying all sorts of solutions from the forum, useful or not to find the cause of the prroblem
In general, when you try something and it does not help, then you should revert that immediately after that test to avoid getting deeper and deeper in the …
Running inxi -GSaz as a normal user:
System:
Kernel: 5.14.21-150500.55.65-default arch: x86_64 bits: 64 compiler: gcc v: 7.5.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.65-default
root=UUID=95757090-5d19-4c7e-bc7a-1df323789d63 splash=silent
resume=/dev/disk/by-uuid/309ba1e4-d6e8-46a7-882c-c4417a7619d5 preempt=full mitigations=auto
quiet security=apparmor
Console: tty 1 DM: 1: GDM v: 41.3 2: SDDM note: stopped Distro: openSUSE Leap 15.5
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 710] vendor: Micro-Star MSI driver: nouveau v: kernel
non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Fermi 2 code: GF119/GK208
process: TSMC 28nm built: 2010-16 pcie: gen: 2 speed: 5 GT/s lanes: 8 ports:
active: DVI-D-1,HDMI-A-1,VGA-2 empty: none bus-ID: 04:00.0 chip-ID: 10de:128b class-ID: 0300
temp: 49.0 C
Device-2: Matrox Systems G200eR2 vendor: Dell driver: mgag200 v: kernel ports: active: VGA-1
empty: none bus-ID: 0a:00.0 chip-ID: 102b:0534 class-ID: 0300
Device-3: Logitech QuickCam Pro 9000 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 2-2.1.1.4:7 chip-ID: 046d:0990 class-ID: 0102 serial:
Display: server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.5 driver: gpu: mgag200,nouveau
note: X driver n/a - try sudo/root tty: 210x65
Monitor-1: DVI-D-1 model: HISENSE serial: built: 2020 res: 3840x2160 dpi: 85
gamma: 1.2 size: 1872x1053mm (73.7x41.46") diag: 1321mm (52") ratio: 16:9 modes: max: 3840x2160
min: 640x480
Monitor-2: HDMI-A-1 model: Sony TV serial: built: 2008 res: 1360x768 dpi: 22
gamma: 1.2 size: 1600x900mm (62.99x35.43") diag: 1836mm (72.3") ratio: 16:9 modes: max: 1360x768
min: 640x480
Monitor-3: VGA-1 model: Samsung S24D300 serial: built: 2018 res: 1920x1080 dpi: 94
gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1680x1050
min: 640x480
Monitor-4: VGA-2 model: Samsung S24D300 serial: built: 2013 res: 1920x1080 dpi: 94
gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1920x1080
min: 720x400
API: OpenGL Message: GL data unavailable in console. Try -G --display
piet@localhost:~>
and as root:
System:
Kernel: 5.14.21-150500.55.65-default arch: x86_64 bits: 64 compiler: gcc v: 7.5.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.65-default
root=UUID=95757090-5d19-4c7e-bc7a-1df323789d63 splash=silent
resume=/dev/disk/by-uuid/309ba1e4-d6e8-46a7-882c-c4417a7619d5 preempt=full mitigations=auto
quiet security=apparmor
Console: tty 1 DM: 1: GDM v: 41.3 2: SDDM note: stopped Distro: openSUSE Leap 15.5
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 710] vendor: Micro-Star MSI driver: nouveau v: kernel
non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Fermi 2 code: GF119/GK208
process: TSMC 28nm built: 2010-16 pcie: gen: 2 speed: 5 GT/s lanes: 8 ports:
active: DVI-D-1,HDMI-A-1,VGA-2 empty: none bus-ID: 04:00.0 chip-ID: 10de:128b class-ID: 0300
temp: 49.0 C
Device-2: Matrox Systems G200eR2 vendor: Dell driver: mgag200 v: kernel ports: active: VGA-1
empty: none bus-ID: 0a:00.0 chip-ID: 102b:0534 class-ID: 0300
Device-3: Logitech QuickCam Pro 9000 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 2-2.1.1.4:7 chip-ID: 046d:0990 class-ID: 0102 serial:
Display: server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.5 driver: gpu: mgag200,nouveau
note: X driver n/a tty: 210x65
Monitor-1: DVI-D-1 model: HISENSE serial: built: 2020 res: 3840x2160 dpi: 85
gamma: 1.2 size: 1872x1053mm (73.7x41.46") diag: 1321mm (52") ratio: 16:9 modes: max: 3840x2160
min: 640x480
Monitor-2: HDMI-A-1 model: Sony TV serial: built: 2008 res: 1360x768 dpi: 22
gamma: 1.2 size: 1600x900mm (62.99x35.43") diag: 1836mm (72.3") ratio: 16:9 modes: max: 1360x768
min: 640x480
Monitor-3: VGA-1 model: Samsung S24D300 serial: built: 2018 res: 1920x1080 dpi: 94
gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1680x1050
min: 640x480
Monitor-4: VGA-2 model: Samsung S24D300 serial: built: 2013 res: 1920x1080 dpi: 94
gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1920x1080
min: 720x400
API: OpenGL Message: GL data unavailable in console for root.
piet@localhost:~>
Please remind what is said above:
is a very bad substitution for doing as requested.
And I do not understand why this is so difficult (not only for you, but I see this with may people). Just copying/pasting one line more at the top and one line more at the bottom. That is all.
Sorry about the command prompt. The computer boots into console mode, so I ran it in the startup console and redirected the output to a file, which after running startx and firing up the console I cat to the console. I dont know any other way, sorry. Remember X is dead when I startup