continue log file
...
138.624] (II) Loading sub module "fbdevhw"
138.624] (II) LoadModule: "fbdevhw"
138.624] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
138.625] (II) Module fbdevhw: vendor="X.Org Foundation"
138.625] compiled for 1.18.3, module version = 0.0.2
138.625] ABI class: X.Org Video Driver, version 20.0
138.625] (WW) Falling back to old probe method for vesa
138.625] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
138.625] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
138.625] (==) NVIDIA(0): RGB weight 888
138.625] (==) NVIDIA(0): Default visual is TrueColor
138.625] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
138.625] (**) NVIDIA(0): Enabling 2D acceleration
139.024] (II) NVIDIA(GPU-0): Display (DELL 1909W (CRT-0)) does not support NVIDIA 3D Vision
139.024] (II) NVIDIA(GPU-0): stereo.
139.026] (II) NVIDIA(0): NVIDIA GPU GeForce 7025 / nForce 630a (C61) at PCI:0:13:0
139.026] (II) NVIDIA(0): (GPU-0)
139.026] (--) NVIDIA(0): Memory: 524288 kBytes
139.026] (--) NVIDIA(0): VideoBIOS: 05.61.32.28.00
139.026] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
139.026] (--) NVIDIA(0): Valid display device(s) on GeForce 7025 / nForce 630a at PCI:0:13:0
139.026] (--) NVIDIA(0): DELL 1909W (CRT-0) (connected)
139.026] (--) NVIDIA(0): DELL 1909W (CRT-0): 350.0 MHz maximum pixel clock
139.026] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
139.026] (**) NVIDIA(0): device DELL 1909W (CRT-0) (Using EDID frequencies has been
139.026] (**) NVIDIA(0): enabled on all display devices.)
139.026] (==) NVIDIA(0):
139.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
139.026] (==) NVIDIA(0): will be used as the requested mode.
139.026] (==) NVIDIA(0):
139.027] (II) NVIDIA(0): Validated MetaModes:
139.027] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
139.027] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
139.027] (WW) NVIDIA(0): Unable to support custom viewPortOut 1440 x 810 +0 +45
139.027] (WW) NVIDIA(0): Unable to support custom viewPortOut 1440 x 810 +0 +45
139.028] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
139.028] (--) NVIDIA(0): option
139.028] (II) UnloadModule: "modesetting"
139.028] (II) Unloading modesetting
139.028] (II) UnloadModule: "fbdev"
139.028] (II) Unloading fbdev
139.028] (II) UnloadSubModule: "fbdevhw"
139.028] (II) Unloading fbdevhw
139.028] (II) UnloadModule: "vesa"
139.028] (II) Unloading vesa
139.028] (--) Depth 24 pixmap format is 32 bpp
139.031] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
139.031] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
139.031] (II) NVIDIA(0): configuration option may not be set correctly. When the
139.031] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
139.031] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
139.031] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
139.031] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
139.031] (II) NVIDIA(0): Config Options in the README.
139.031] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
139.129] (==) NVIDIA(0): Disabling shared memory pixmaps
139.129] (==) NVIDIA(0): Backing store enabled
139.129] (==) NVIDIA(0): Silken mouse enabled
139.130] (==) NVIDIA(0): DPMS enabled
139.130] (II) Loading sub module "dri2"
139.130] (II) LoadModule: "dri2"
139.130] (II) Module "dri2" already built-in
139.130] (II) NVIDIA(0): [DRI2] Setup complete
139.130] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
139.130] (--) RandR disabled
139.134] (II) Initializing extension GLX
139.134] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event2)
139.201] (**) Power Button: Applying InputClass "evdev keyboard catchall"
139.201] (**) Power Button: Applying InputClass "system-keyboard"
139.201] (**) Power Button: Applying InputClass "evdev keyboard catchall"
139.201] (**) Power Button: Applying InputClass "libinput keyboard catchall"
139.201] (II) LoadModule: "libinput"
139.201] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
139.202] (II) Module libinput: vendor="X.Org Foundation"
139.202] compiled for 1.18.3, module version = 0.25.1
139.202] Module class: X.Org XInput Driver
139.202] ABI class: X.Org XInput driver, version 22.1
139.202] (II) Using input driver 'libinput' for 'Power Button'
139.202] (**) Power Button: always reports core events
139.202] (**) Option "Device" "/dev/input/event2"
139.203] (**) Option "_source" "server/udev"
139.203] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
139.203] (II) input device 'Power Button', /dev/input/event2 is a keyboard
139.216] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
139.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
139.216] (**) Option "xkb_model" "microsoftpro"
139.216] (**) Option "xkb_layout" "us"
139.216] (**) Option "xkb_variant" "intl"
139.216] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
139.258] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
139.258] (II) input device 'Power Button', /dev/input/event2 is a keyboard
139.259] (II) config/udev: Adding input device Power Button (/dev/input/event1)
139.259] (**) Power Button: Applying InputClass "evdev keyboard catchall"
139.259] (**) Power Button: Applying InputClass "system-keyboard"
139.259] (**) Power Button: Applying InputClass "evdev keyboard catchall"
139.259] (**) Power Button: Applying InputClass "libinput keyboard catchall"
139.259] (II) Using input driver 'libinput' for 'Power Button'
139.259] (**) Power Button: always reports core events
139.259] (**) Option "Device" "/dev/input/event1"
139.259] (**) Option "_source" "server/udev"
139.259] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
139.259] (II) input device 'Power Button', /dev/input/event1 is a keyboard
139.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
139.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
139.276] (**) Option "xkb_model" "microsoftpro"
139.276] (**) Option "xkb_layout" "us"
139.276] (**) Option "xkb_variant" "intl"
139.276] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
139.276] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
139.276] (II) input device 'Power Button', /dev/input/event1 is a keyboard
139.277] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
139.277] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
139.277] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
139.277] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
139.277] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
139.277] (**) Logitech USB Optical Mouse: always reports core events
139.277] (**) Option "Device" "/dev/input/event3"
139.277] (**) Option "_source" "server/udev"
139.332] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse
139.332] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is a pointer caps
139.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046D:C00C.0001/input/input3/event3"
139.388] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)