Installing USB TP-Link W823n (v2)

Hi Everyone.
Can you help me install my wireless driver?
I have downloaded the drivers from the manufacturer site and they have instructions of how to compile it. However, I’m not familiar with makefiles and editing them.
I also tried lsusb and it doesn’t have a complete info it only gives “Bus 001 Device 006: ID 2357:0109”
Anyway,
Here are the instructions:

2.1. Compilation tool and kernel sources
Before you compile the driver, please make sure you have the correct compile tool and
kernel sources.
We can install compile tool gcc by command “apt-get install gcc”
Note : We recommend you use a suitable compile tool to compile our driver.
For example:
According to the command “cat /proc/version”, we could see your linux system is compiled
by gcc4.8.2. So we recommend you use gcc4.8.2 to compile our driver if possible.
(I guess no problem here? mine is 4.8.5)

2.2. Compile and install the Driver

  1. Access the directory of driver.
  2. Before compile, make sure the parameters in “makefile.c” is suitable for your
    compile environment of your Linux system.
    ifeq ($(CONFIG_PLATFORM_I386_PC), y)
    EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
    SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
    ARCH ?= $(SUBARCH)
    CROSS_COMPILE ?=
    KVER := $(shell uname -r)
    KSRC := /lib/modules/$(KVER)/build
    MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
    INSTALL_PREFIX :=
    endif

Explanation:
· KSRC is used to specify the kernel source path for driver compilation.
· CROSS_COMPILE is used to specify the toolchain.
· ARCH is used to specify the target platform’s CPU architectures such as arm, mips,
i386 and so on.

If your Linux kernel does not support 802.11, please annotate macro
“CONFIG_IOCTL_CFG80211” in “makefile.c”.
CONFIG_IOCTL_CFG80211=n
ifeq ($(strip &(CONFIG_IOCTL_CFG80211)),y)
EXTRA_CFLAGS + = -DCONFIG_IOCTL_CFG80211 = 1
EXTRA_CFLAGS + = -DRTW_USE_CFG80211_STA_EVENT = 1
endif

  1. Type “sudo make” to compile the driver file.
  2. Type “sudo make install” to install the driver file.

I guess I only have problems with part 2.2
Trying sudo make only gives me error.

make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.1.21-14-default/build M=/home/ace/Downloads/TL-WN823N(EU)_V2_160315_Linux/Driver modules
/bin/sh: -c: line 0: syntax error near unexpected token (' /bin/sh: -c: line 0: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.1.21-14-default/build M=/home/ace/Downloads/TL-WN823N(EU)_V2_160315_Linux/Driver modules’
Makefile:1696: recipe for target ‘modules’ failed
make: *** [modules] Error 1