HDD troubles

Volgende melding gekregen, helaas zal de hdd het wel opgegeven hebben. maar wil toch ook kijken of ik nog wat kan redden aan spul. Hoe gaat dat nu lukken. Ben even de juiste weg zoek.

Er is een fout opgetreden bij het aanspreken van ‘Persoonlijke map’, het systeem geeft de volgende foutmelding weer: De gevraagde bewerking is mislukt: Error mounting /dev/sdh3 at /run/media/ben/c8407ea8-be46-45c9-91f5-f3e80b107188: Command-line `mount -t “xfs” -o “uhelper=udisks2,nodev,nosuid” “/dev/sdh3” “/run/media/ben/c8407ea8-be46-45c9-91f5-f3e80b107188”’ exited with non-zero exit status 32: mount: mount /dev/sdh3 on /run/media/ben/c8407ea8-be46-45c9-91f5-f3e80b107188 failed: Structure needs cleaning

Hallo Ben,

Het gaat kennelijk om een verwijderbaar apparaat dat je probeert te gebruiken. Dus niet om éën van de disk (partities) die je altijd gebruikt (zoals / and eventueel /home).

Klopt dat?

Hallo Ben,

Kennlijk zit je niet springend om hulp te wachten.

Je hebt kennelijk nogal wat mass-storage apparaten aangesloten. Weet je welke sdh is?

Kijk eens even naar xfs_repair. Heeft ook man pages.

O, ja, en aannemend dat dit een externe schijf is ( anders zou ie niet op /run/media … aangekoppeld worden ), draai eens

dmesg -w

, sluit de schijf aan en kijk naar de output. Evt… hier kopiëren tussen CODE tags ( #)

Ik heb deze hdd uit een andere pc gehaald en aan mijn pc gehangen… Ben inderdaad de CODE tags vergeten, sorry.
Zit nu even niet thuis, zal het even doen als ik weer daar ben.
Zal de hdd eerst in de originele pc proppen.

Zo heb de hdd even terug gezet in de pc. Kan nu IceWM opstarten , echter zonder internet. Snapper rollback wil ook niet werken.
Er is in ieder geval een interne error XFS_WANT_CORRUPTED_RETURN op sda3
Zal toch moeten gaan zoeken nu.

An error occurred while accessing '190,9 GiB harde schijf', the system responded: De gevraagde bewerking is mislukt: Error mounting /dev/sda3 at /run/media/linux/c8407ea8-be46-45c9-91f5-f3e80b107188: Command-line `mount -t "xfs" -o "uhelper=udisks2,nodev,nosuid" "/dev/sda3" "/run/media/linux/c8407ea8-be46-45c9-91f5-f3e80b107188"' exited with non-zero exit status 32: mount: mount /dev/sda3 on /run/media/linux/c8407ea8-be46-45c9-91f5-f3e80b107188 failed: Structure needs cleaning

Heb nu de pc gestart met een live usb stick 42.2

dmesg -w geeft het volgende heb wel een deel info niet erbij gezet, er is duidelijk wat fout met sda3.



   14.783701] systemd-fstab-generator[1236]: Failed to create mount unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?             
   15.157647] systemd[1230]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with error code 1.
   15.246491] systemd[1]: read\x2donly.mount: Unit is bound to inactive unit dev-loop0.device. Stopping, too.
   15.246586] systemd[1]: livecd.mount: Unit is bound to inactive unit dev-sdb2.device. Stopping, too.
   15.246757] systemd[1]: read\x2dwrite.mount: Unit is bound to inactive unit dev-sdb3.device. Stopping, too.
   15.260857] systemd[1]: nss-lookup.target: Dependency Before=nss-lookup.target dropped
   15.267044] systemd[1]: Reached target Remote File Systems (Pre).
   15.267205] systemd[1]: Reached target System Time Synchronized.
   16.070465] Adding 2103292k swap on /dev/sda1.  Priority:-1 extents:1 across:2103292k FS
   18.615946] systemd-journald[1267]: Received request to flush runtime journal from PID 1
   18.715015] audit: type=1305 audit(1497375720.658:2): audit_pid=1319 old=0 auid=4294967295 ses=4294967295 res=1
   19.978453] kvm: disabled by bios
   20.147892] input: PC Speaker as /devices/platform/pcspkr/input/input9
   20.148355] kvm: disabled by bios
   20.158264] i2c i2c-7: nForce2 SMBus adapter at 0x2d00
   20.158276] ACPI Warning: SystemIO range 0x0000000000002E00-0x0000000000002E3F conflicts with OpRegion 0x0000000000002E00-0x0000000000002E3F (\SM00) (20150930/utaddress-254)
   20.158277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
   20.298254] acpi-cpufreq: overriding BIOS provided _PSD data
   20.391153] EDAC MC: Ver: 3.0.0
   20.655761] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
   20.730369] MCE: In-kernel MCE decoding enabled.
   20.871659] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
   20.926936] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
   21.178936] AMD64 EDAC driver v3.4.0
   21.178998] EDAC amd64: DRAM ECC disabled.
   21.179006] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
   21.443510] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0000b53372, S400
   21.826236] forcedeth 0000:00:0a.0 eth1: renamed from eth0
   22.001572] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
   22.001590] snd_hda_intel 0000:00:07.0: Disabling MSI
   22.278799] raid6: sse2x1   gen()  1213 MB/s
   22.346757] raid6: sse2x1   xor()  1070 MB/s
   22.414777] raid6: sse2x2   gen()  2041 MB/s
   22.482760] raid6: sse2x2   xor()  1820 MB/s
   22.550775] raid6: sse2x4   gen()  2350 MB/s
   22.618760] raid6: sse2x4   xor()  1157 MB/s
   22.618768] raid6: using algorithm sse2x4 gen() 2350 MB/s
   22.618770] raid6: .... xor() 1157 MB/s, rmw enabled
   22.618772] raid6: using intx1 recovery algorithm
   22.691037] xor: measuring software checksum speed
   22.730743]    prefetch64-sse:  3290.000 MB/sec
   22.770738]    generic_sse:  3114.000 MB/sec
   22.770741] xor: using function: prefetch64-sse (3290.000 MB/sec)
   22.977091] BTRFS: using crc32c-generic for crc32c
   22.977676] Btrfs loaded, assert=on
   22.978136] BTRFS: device fsid a82aad6f-bad5-4ddf-b743-6f2d5f92b1c1 devid 1 transid 162873 /dev/sda2
   23.438814] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
   23.526808] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   23.526826] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   23.526838] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   23.526844] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
   23.526849] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
   23.526852] snd_hda_codec_realtek hdaudioC0D0:    inputs:
   23.526859] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
   23.526864] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
   23.526869] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1c
   26.479995] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
   26.482042] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
   26.488289] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
   26.488525] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
   26.490820] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
   26.491062] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
   26.491254] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input16
   26.491439] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input17
   26.491631] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input18
   81.543673] usb 3-2: USB disconnect, device number 2
   83.188502] usb 3-2: new low-speed USB device number 3 using ohci-pci
   83.402570] usb 3-2: New USB device found, idVendor=045e, idProduct=0084
   83.402585] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
   83.402589] usb 3-2: Product: Microsoft Basic Optical Mouse 
   83.402592] usb 3-2: Manufacturer: Microsoft 
   83.415846] input: Microsoft  Microsoft Basic Optical Mouse  as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:045E:0084.0004/input/input19
   83.415977] hid-generic 0003:045E:0084.0004: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse ] on usb-0000:00:02.0-2/input0
  109.187821] vboxguest: loading out-of-tree module taints kernel.
  109.191430] vboxguest: PCI device not found, probably running on physical hardware.
  109.575513] vboxguest: PCI device not found, probably running on physical hardware.
  111.928057] ip6_tables: (C) 2000-2006 Netfilter Core Team
  112.318887] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  112.662786] ip_tables: (C) 2000-2006 Netfilter Core Team
  118.306149] forcedeth 0000:00:0a.0 eth1: MSI enabled
  119.403125] NET: Registered protocol family 17
  260.681515] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  260.721131] XFS (sda3): Mounting V5 Filesystem
  260.930805] XFS (sda3): Starting recovery (logdev: internal)
  261.037135] XFS (sda3): Internal error XFS_WANT_CORRUPTED_RETURN at line 188 of file ../fs/xfs/libxfs/xfs_dir2_data.c.  Caller xfs_dir3_block_verify+0x85/0x90 [xfs]
  261.037157] CPU: 0 PID: 3235 Comm: mount Tainted: G           O     4.4.27-2-default #1
  261.037160] Hardware name: Hewlett-Packard HP Pro 3015 Microtower PC/2A9Eh, BIOS 5.13    11/12/2009
  261.037167]  0000000000000000 ffffffff81327657 ffff88000382bdf0 ffff88000382b000
  261.037172]  ffffffffa097e6fb ffff88000382b030 ffff88000382bdf0 ffff88006c669800
  261.037177]  0000002200408800 ffff880059ebfd40 ffff88000382bff8 ffff88000382b6b1
  261.037178] Call Trace:
  261.037207]  <ffffffff81019e69>] dump_trace+0x59/0x320
  261.037218]  <ffffffff8101a22a>] show_stack_log_lvl+0xfa/0x180
  261.037231]  <ffffffff8101afd1>] show_stack+0x21/0x40
  261.037240]  <ffffffff81327657>] dump_stack+0x5c/0x85
  261.037306]  <ffffffffa097e6fb>] __xfs_dir3_data_check+0x44b/0x560 [xfs]
  261.037398]  <ffffffffa097c5d5>] xfs_dir3_block_verify+0x85/0x90 [xfs]
  261.037467]  <ffffffffa097c760>] xfs_dir3_block_write_verify+0x30/0xe0 [xfs]
  261.037538]  <ffffffffa0997f66>] _xfs_buf_ioapply+0x86/0x400 [xfs]
  261.037609]  <ffffffffa0999b29>] xfs_buf_submit+0x59/0x1d0 [xfs]
  261.037682]  <ffffffffa0999e16>] __xfs_buf_delwri_submit+0x176/0x290 [xfs]
  261.037754]  <ffffffffa099ac5f>] xfs_buf_delwri_submit+0x2f/0xf0 [xfs]
  261.037834]  <ffffffffa09c4b60>] xlog_recover_commit_trans+0x1a0/0x250 [xfs]
  261.037912]  <ffffffffa09c4c8d>] xlog_recovery_process_trans+0x7d/0xb0 [xfs]
  261.037999]  <ffffffffa09c4e05>] xlog_recover_process_data+0x75/0xc0 [xfs]
  261.038076]  <ffffffffa09c521e>] xlog_do_recovery_pass+0x3ce/0x4b0 [xfs]
  261.038156]  <ffffffffa09c5379>] xlog_do_log_recovery+0x79/0xc0 [xfs]
  261.038234]  <ffffffffa09c53d1>] xlog_do_recover+0x11/0xd0 [xfs]
  261.038310]  <ffffffffa09c5e66>] xlog_recover+0xa6/0x140 [xfs]
  261.038385]  <ffffffffa09ba0e1>] xfs_log_mount+0x241/0x2b0 [xfs]
  261.038461]  <ffffffffa09b164f>] xfs_mountfs+0x49f/0x820 [xfs]
  261.038539]  <ffffffffa09b4699>] xfs_fs_fill_super+0x429/0x520 [xfs]
  261.038555]  <ffffffff8120854e>] mount_bdev+0x19e/0x1e0
  261.038566]  <ffffffff81208e64>] mount_fs+0x34/0x170
  261.038575]  <ffffffff81223cb2>] vfs_kern_mount+0x62/0x110
  261.038583]  <ffffffff812261a3>] do_mount+0x213/0xcf0
  261.038592]  <ffffffff81226f65>] SyS_mount+0x85/0xd0
  261.038601]  <ffffffff816093f2>] entry_SYSCALL_64_fastpath+0x16/0x71
  261.044567] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x16/0x71

  261.044569] Leftover inexact backtrace:

  261.044685] XFS (sda3): Metadata corruption detected at xfs_dir3_block_write_verify+0xc8/0xe0 [xfs], xfs_dir3_block block 0x5f702e0
  261.044695] XFS (sda3): Unmount and run xfs_repair
  261.044697] XFS (sda3): First 64 bytes of corrupted metadata buffer:
  261.044702] ffff88000382b000: 58 44 42 33 94 85 cf f5 00 00 00 00 05 f7 02 e0  XDB3............
  261.044705] ffff88000382b010: 00 00 00 20 00 02 61 fe c8 40 7e a8 be 46 45 c9  ... ..a..@~..FE.
  261.044707] ffff88000382b020: 91 f5 f3 e8 0b 10 71 88 00 00 00 00 08 00 00 42  ......q........B
  261.044710] ffff88000382b030: 03 40 00 48 05 50 00 48 06 e0 00 48 00 00 00 00  .@.H.P.H...H....
  261.044715] XFS (sda3): xfs_do_force_shutdown(0x8) called from line 1254 of file ../fs/xfs/xfs_buf.c.  Return address = 0xffffffffa0997f96
  261.044721] XFS (sda3): Corruption of in-memory data detected.  Shutting down filesystem
  261.044724] XFS (sda3): Please umount the filesystem and rectify the problem(s)
  261.046389] XFS (sda3): log mount/recovery failed: error -117
  261.046454] XFS (sda3): log mount failed
  297.217076] BTRFS info (device sda2): disk space caching is enabled
  297.217084] BTRFS: has skinny extents
  297.549299] BTRFS: checking UUID tree
  299.943468] XFS (sda3): Mounting V5 Filesystem
  300.153137] XFS (sda3): Starting recovery (logdev: internal)
  300.242805] XFS (sda3): Internal error XFS_WANT_CORRUPTED_RETURN at line 188 of file ../fs/xfs/libxfs/xfs_dir2_data.c.  Caller xfs_dir3_block_verify+0x85/0x90 [xfs]
  300.242827] CPU: 0 PID: 3367 Comm: mount Tainted: G           O     4.4.27-2-default #1
  300.242830] Hardware name: Hewlett-Packard HP Pro 3015 Microtower PC/2A9Eh, BIOS 5.13    11/12/2009
  300.242837]  0000000000000000 ffffffff81327657 ffff88004ac35df0 ffff88004ac35000
  300.242842]  ffffffffa097e6fb ffff88004ac35030 ffff88004ac35df0 ffff8800387e8000
  300.242854]  0000002200401000 ffff880056695780 ffff88004ac35ff8 ffff88004ac356b1
  300.242859] Call Trace:
  300.242887]  <ffffffff81019e69>] dump_trace+0x59/0x320
  300.242901]  <ffffffff8101a22a>] show_stack_log_lvl+0xfa/0x180
  300.242910]  <ffffffff8101afd1>] show_stack+0x21/0x40
  300.242924]  <ffffffff81327657>] dump_stack+0x5c/0x85
  300.242987]  <ffffffffa097e6fb>] __xfs_dir3_data_check+0x44b/0x560 [xfs]
  300.243082]  <ffffffffa097c5d5>] xfs_dir3_block_verify+0x85/0x90 [xfs]
  300.243153]  <ffffffffa097c760>] xfs_dir3_block_write_verify+0x30/0xe0 [xfs]
  300.243225]  <ffffffffa0997f66>] _xfs_buf_ioapply+0x86/0x400 [xfs]
  300.243297]  <ffffffffa0999b29>] xfs_buf_submit+0x59/0x1d0 [xfs]
  300.243370]  <ffffffffa0999e16>] __xfs_buf_delwri_submit+0x176/0x290 [xfs]
  300.243443]  <ffffffffa099ac5f>] xfs_buf_delwri_submit+0x2f/0xf0 [xfs]
  300.243520]  <ffffffffa09c4b60>] xlog_recover_commit_trans+0x1a0/0x250 [xfs]
  300.243600]  <ffffffffa09c4c8d>] xlog_recovery_process_trans+0x7d/0xb0 [xfs]
  300.243680]  <ffffffffa09c4e05>] xlog_recover_process_data+0x75/0xc0 [xfs]
  300.243757]  <ffffffffa09c521e>] xlog_do_recovery_pass+0x3ce/0x4b0 [xfs]
  300.243838]  <ffffffffa09c5379>] xlog_do_log_recovery+0x79/0xc0 [xfs]
  300.243916]  <ffffffffa09c53d1>] xlog_do_recover+0x11/0xd0 [xfs]
  300.243993]  <ffffffffa09c5e66>] xlog_recover+0xa6/0x140 [xfs]
  300.244070]  <ffffffffa09ba0e1>] xfs_log_mount+0x241/0x2b0 [xfs]
  300.244147]  <ffffffffa09b164f>] xfs_mountfs+0x49f/0x820 [xfs]
  300.244226]  <ffffffffa09b4699>] xfs_fs_fill_super+0x429/0x520 [xfs]
  300.244243]  <ffffffff8120854e>] mount_bdev+0x19e/0x1e0
  300.244263]  <ffffffff81208e64>] mount_fs+0x34/0x170
  300.244274]  <ffffffff81223cb2>] vfs_kern_mount+0x62/0x110
  300.244284]  <ffffffff812261a3>] do_mount+0x213/0xcf0
  300.244295]  <ffffffff81226f65>] SyS_mount+0x85/0xd0
  300.244306]  <ffffffff816093f2>] entry_SYSCALL_64_fastpath+0x16/0x71
  300.250262] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x16/0x71

  300.250264] Leftover inexact backtrace:

  300.250385] XFS (sda3): Metadata corruption detected at xfs_dir3_block_write_verify+0xc8/0xe0 [xfs], xfs_dir3_block block 0x5f702e0
  300.250391] XFS (sda3): Unmount and run xfs_repair
  300.250395] XFS (sda3): First 64 bytes of corrupted metadata buffer:
  300.250400] ffff88004ac35000: 58 44 42 33 94 85 cf f5 00 00 00 00 05 f7 02 e0  XDB3............
  300.250405] ffff88004ac35010: 00 00 00 20 00 02 61 fe c8 40 7e a8 be 46 45 c9  ... ..a..@~..FE.
  300.250410] ffff88004ac35020: 91 f5 f3 e8 0b 10 71 88 00 00 00 00 08 00 00 42  ......q........B
  300.250414] ffff88004ac35030: 03 40 00 48 05 50 00 48 06 e0 00 48 00 00 00 00  .@.H.P.H...H....
  300.250421] XFS (sda3): xfs_do_force_shutdown(0x8) called from line 1254 of file ../fs/xfs/xfs_buf.c.  Return address = 0xffffffffa0997f96
  300.250425] XFS (sda3): Corruption of in-memory data detected.  Shutting down filesystem
  300.250430] XFS (sda3): Please umount the filesystem and rectify the problem(s)
  300.280527] XFS (sda3): log mount/recovery failed: error -117
  300.280622] XFS (sda3): log mount failed 

  300.250385] XFS (sda3): Metadata corruption detected at xfs_dir3_block_write_verify+0xc8/0xe0 [xfs], xfs_dir3_block block 0x5f702e0
  300.250391] XFS (sda3): Unmount and run xfs_repair

Daar zit de crux.


su -
umount /dev/sda3
xfs_repair /dev/sda3

Als er anders niks meer mee te beginnen is ( schijf kan een tik gehad hebben en dan houdt het een keer op ), kun je nog


xfs_repair -d /dev/sda3

maar die “-d” staat voor “repair dangerously”.

Bedankt GertJan ,
daar zal wel een rottigheidje uit gaan rollen. Hoop dat ik in ieder geval nog wat data kan overhevelen naar een andere hdd.
Waar de eventuele tik vandaan kan komen is niet belangrijk, helaas was dit wel na een update.
Is trouwens niet de eerste pc die ik met dit probleem had, helaas ook steeds met Leap 42.1
Op deze pc kreeg ik het probleem niet getackeld, de andere kon ik nog met een snapper oplossing terug krijgen.

Mijn ervaring: als xfs_repair er niks meer mee kan, dan gaat 't iets fysieks met de schijf. Ik zoek nog even

O, en snapper is alleen voor je btrfs filesystems, niet voor xfs. Btrfs zou ik ook niet doen voor grote(re) data partities.

Het wil niet echt lukken met deze hdd, sda3 the structure needs cleaning.
Vervelende is dat de pc en hdd niet van mij is. Dame van 86 die graag haar foto’s en zo terug wil.

su -
umount /dev/sda3
xfs_repair /dev/sda3

Dat doet het niet wat ik verlang en

xfs_repair -d /dev/sda3

Wat kan hierop mis gaan???

Als xfs_repair 't zonder -d niet doet en je kunt niet bij de data … Als filesystem kapot is beyond repair, of de schijf, dan houdt het een keer op. Ik meen me te herinneren dat ik nog data terug gekregen heb met dd_rescue , maar ik heb in ieder geval met een klant ook zo’n ramp meegemaakt. Sindsdien dwing ik ze een externe schijf te kopen of alles te syncen naar Googe of dergelijke.

Yep. dd_rescue is je kans. Met ( zoals 't nu bij jou was )

dd_rescue /dev/sda3 sda3.iso

Als ik 't me goed herinner kun je die iso dan mounten, en er een filesystemcheck op loslaten. Ik kreeg 1 map met allemaal gekke tekens ( geen vreemde taal ), en bestanden van 9.93TB per stuk. Maar goed, ik kon nog 't e.e.a. terughalen.

O.k dat moet het dan gaan doen voor me, de dame in kwestie heeft niet veel know how van dingen opslaan is een echte gebruiker en internetter. Met haar leeftijd mag dat wel. Zal in ieder geval voorzichtig gaan proberen :wink:

Heb op de een of andere manier weer contact.

If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair.
Note that destroying the log may cuase corruption – please attempt a mount of the filesystem before doing this.

Is dit nu een cirkel gebeuren, mount wil niet.

mount: can’t find /dev/sda3 in /etc/fstab

linux-seo3:~ # xfs_repair /dev/sda3
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - zero log...
ERROR: The filesystem has valuable metadata changes in a log which needs to
be replayed.  Mount the filesystem to replay the log, and unmount it before
re-running xfs_repair.  If you are unable to mount the filesystem, then use
the -L option to destroy the log and attempt a repair.
Note that destroying the log may cause corruption -- please attempt a mount
of the filesystem before doing this.

Hè. Die poging tot mounten heb je al gehad. Ik heb nog even verder zitten zoeken, ook bij xfs.org, maar 't lijkt erop dat de enige optie die je nog hebt, die -L optie is. Sneu voor de dame. Ik heb zelf ook iets dergelijks meegemaakt bij een klant. Ook een bejaarde. Gewoon schijf naar de klote, en dan ligt er naast de PC al 3 maand een 1 TB externe schijf, die zonder USB kabel geleverd is …

Hetzelfde hier dus, zij heeft usb-sticks die ze steeds weer vergeet te gebruiken.
Zal die -L optie maar eens gaan bekijken, anders eens naar een hackers club in Rotterdam.