GUI blockiert, gnome-shell 100% CPU

tilmanschmidt · February 25, 2018, 11:08pm

Seit dem Upgrade auf LEAP 42.3 beobachte ich mehrmals täglich folgendes äußerst lästiges Phänomen:
Während des Arbeitens wird plötzlich die gesamte GUI unbedienbar. Der Mauszeiger lässt sich zwar noch normal bewegen, laufende Programme laufen weiter, aber kein GUI-Element reagiert mehr auf Klicks oder Tastatureingaben.
Mit Strg/Alt/F1 kann ich auf eine Textkonsole wechseln, die auch normal bedienbar ist. Mit top sehe ich, dass ein Prozess namens gnome-shell einen CPU-Kern komplett auslastet, d.h. laufend zwischen 98 und 100% CPU beansprucht. Ansonsten funktioniert das System in der Textkonsole völlig normal. Wenn ich mit Strg/Alt/F7 auf die GUI zurückwechsle, ist der Zustand dort unverändert.
Dieser Zustand hält meistens ca. 5-10 Minuten an. Danach funktioniert das System wieder, als ob nichts gewesen wäre - bis zum nächsten Mal.
Ich habe bisher weder eine Regelmäßigkeit gefunden, wann das Problem auftritt, noch einen Weg, den Zustand zu beenden - außer geduldig abzuwarten, bis er von alleine aufhört.

Irgendeine Idee, was das sein könnte, wie ich der Ursache auf die Schliche kommen und besser noch, sie beseitigen kann?

malcolmlewis · February 25, 2018, 11:12pm

Hi


coredumpctl list

tracker?
http://bugzilla.opensuse.org/show_bug.cgi?id=1017652

SF6 · February 25, 2018, 11:19pm

Zu wenig RAM/ Swap kann es nicht sein?

Sauerland · February 25, 2018, 11:22pm

Ich würde auch auf tracker tippen.

tilmanschmidt · February 26, 2018, 12:35am

Keine Coredumps:


ts@xenon:~> coredumpctl list
No coredumps found.

Hätte mich auch gewundert. Der gnome-shell Prozess, der vorübergehend 100% CPU frisst, crasht ja nicht, sondern läuft hinterher wieder normal weiter. (Erkennbar an der PID.)

Tracker dürfte eigentlich keinen Mucks mehr machen. Das war eins vom ersten, was ich nach dem Upgrade stillgelegt habe, da er mein System permanent durch systemd-coredump Prozesse ausgelastet hat:


tracker daemon -t
cp /etc/xdg/autostart/tracker-* ~/.config/autostart/.
for FILE in ~/.config/autostart/tracker-*; do echo Hidden=true >> $FILE; done
rm -rf ~/.cache/tracker ~/.local/share/tracker

tilmanschmidt · February 26, 2018, 12:49am

Ich würde behaupten nein. Ich habe 6 GB RAM, der Swap ist quasi ungenutzt, und ich höre auch keine Festplattenaktivität, während die GUI eingefroren ist.
Außerdem ist das Fehlerbild dafür eigentlich eher untypisch.
Das System hatte früher nur 2 GB RAM und damals tatsächlich gelegentlich angefangen zu swappen.
Das sah ganz anders aus.
Da habe ich in top eigentlich nie einen User-Prozess mit 100% CPU-Last gesehen.
Und die GUI war dabei schon noch bedienbar, nur halt sehr, sehr verzögert.

tilmanschmidt · March 3, 2018, 2:14am

Beim selber weiterstochern habe ich in .xsession-errors-:0 mehrfach diese Meldung gefunden:


nouveau: kernel rejected pushbuf: Nicht genügend Hauptspeicher verfügbar
nouveau: ch3: krec 0 pushes 1 bufs 42 relocs 368
nouveau: ch3: buf 00000000 00000002 00000004 00000004 00000000
...
nouveau: ch3: buf 00000029 0000001a 00000002 00000002 00000000
nouveau: ch3: rel 00000000 0001281c 00000001 00000000 0004fa00 00000000 00000000
...
nouveau: ch3: rel 00000000 00015008 00000007 00000005 0000800c 00000000 80000000
nouveau: ch3: psh 00000000 0000012664 0000015070
nouveau:        0x0004fda4
...
nouveau:        0x00000000

Leider enthält die Datei keine Zeitstempel, so dass ich nicht sicher sagen kann, ob und wie die Zeitpunkte, zu denen diese Einträge geschrieben wurden, mit den gnome-shell-Hängern zusammenhängen.

Sauerland · March 3, 2018, 9:37am

Was für Grafikkarten mit welchem Treiber laufen dort:

/sbin/lspci -nnk | grep -EiA3 'vga|3d|display'

tilmanschmidt · March 3, 2018, 12:59pm

Da läuft eine alte nVidia GeForce 6200 TC mit zwei Monitoren, beide per DVI angeschlossen, Auflösungen 1680x1050 und 1280x1024.
Als Treiber habe ich einfach den von Leap 42.3 standardmäßig angebotenen nouveau übernommen, also keinen proprietären nVidia-Treiber installiert.

/sbin/lspci -nnk | grep -EiA3 'vga|3d|display'


01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV44 [GeForce 6200 TurboCache] [10de:0161] (rev a1)
        Subsystem: LeadTek Research Inc. Device [107d:56c4]
        Kernel driver in use: nouveau
        Kernel modules: nouveau

Sauerland · March 3, 2018, 1:54pm

Hast du es mal mit dem G02-Nvidia Treiber versucht?

tilmanschmidt · March 4, 2018, 12:16am

Nein, das sagt mir nichts.

In einer früheren Suse-Version hatte ich eine Zeitlang den proprietären Treiber direkt von Nvidia genutzt, weil nouveau noch keine vernünftige Dual-Monitor-Unterstützung hatte.
Bei 13.x und Leap habe ich immer nur nouveau genutzt.

Was ist der G02-Treiber? Wo bekomme ich den her? Ist der proprietär oder Open Source? Im Suse-Wiki finde ich dazu nichts.

Sauerland · March 4, 2018, 8:00am

https://en.opensuse.org/SDB:NVIDIA_drivers

tilmanschmidt · March 4, 2018, 1:02pm

Die Seite kenne ich, aber G02 ist da nirgends erwähnt.

wolfi323 · March 4, 2018, 1:39pm

G02 ist einfach eine bestimmte “Generation” des proprietären NVidia Treibers, nämlich Version 304.xxx.

Binde einfach das NVidia Repo ein und installiere den Treiber wie beschrieben, das sollte dann automatisch den G02 Treiber wählen.

Die entsprechenden Pakete heißen eben nvidia-gfxG02-kmp-default, nvidia-computeG02 und x11-video-nvidiaG02 (im Gegensatz zu …G03 und…G04 für die Versionen 340.xxx und 390.xxx für neuere Grafikkarten).

tilmanschmidt · March 4, 2018, 11:43pm

Ah, ok, danke für die Erläuterung.
Dann werde ich das mal probieren.

tilmanschmidt · March 18, 2018, 4:31pm

Jetzt bin ich endlich dazu gekommen, den proprietären Treiber auszuprobieren.
Ich bin gemäß der Anleitung zur manuellen Installation https://en.opensuse.org/SDB:NVIDIA_drivers#openSUSE_Leap vorgegangen.
Das Ergebnis ist kurz gesagt katastrophal.

Schon beim Start steht die Maschine minutenlang mit schwarzem Bildschirm und hochdrehendem Lüfter, bis der Login-Bildschirm erscheint.
Nach dem Login wieder minutenlang Volllast mit Mauszeiger auf schwarzem Bildschirm, dann erscheint kurz der Suse-Hintergrund, verschwindet wieder, erneut einige Minuten Volllast, bis der Desktop zum zweiten Mal erscheint und dann bleibt - jedenfalls solange ich nicht versuche etwas auf der Maschine zu machen.
Der Versuch, die Bildschirmeinstellungen zu öffnen, führte aber direkt wieder zum Einfrieren des Desktops.
Beim Wechsel auf die Textkonsole mit Alt/Strg/F1, um mit top zu schauen, was die Maschine so auslastet, stürzte dann die komplette X Session ab und ich hatte nach dem Zurückwechseln mit Alt/Strg/F7 wieder den Login-Bildschirm.

/var/log/warn enthält einige irritierende Meldungen, die ich bisher noch nicht hatte:


2018-03-18T15:20:46.730649+01:00 xenon kernel:    75.974678] NVRM: Your system is not currently configured to drive a VGA console
2018-03-18T15:20:46.730674+01:00 xenon kernel:    75.974683] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
2018-03-18T15:20:46.730678+01:00 xenon kernel:    75.974685] NVRM: requires the use of a text-mode VGA console. Use of other console
2018-03-18T15:20:46.730680+01:00 xenon kernel:    75.974687] NVRM: drivers including, but not limited to, vesafb, may result in
2018-03-18T15:20:46.730681+01:00 xenon kernel:    75.974689] NVRM: corruption and stability problems, and is not supported.


2018-03-18T15:27:08.262732+01:00 xenon gnome-session-binary[4624]: WARNING: Application 'gsettings-data-convert.desktop' killed by signal 5
2018-03-18T15:27:08.312133+01:00 xenon gnome-session-binary[4624]: WARNING: Application 'gsettings-data-convert.desktop' killed by signal 5
2018-03-18T15:27:08.312643+01:00 xenon gnome-session-binary[4624]: WARNING: App 'gsettings-data-convert.desktop' respawning too quickly
2018-03-18T15:27:08.313000+01:00 xenon gnome-session-binary[4624]: WARNING: Error on restarting session managed app: Component 'gsettings-data-convert.desktop' crashing too quickly


2018-03-18T15:22:24.478348+01:00 xenon gnome-session-binary[3606]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
2018-03-18T15:23:14.722214+01:00 xenon kernel:   223.964493] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
2018-03-18T15:23:14.818239+01:00 xenon kernel:   224.061191] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
2018-03-18T15:23:50.206211+01:00 xenon kernel:   259.450103] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
2018-03-18T15:24:39.878223+01:00 xenon kernel:   309.123677] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
2018-03-18T15:24:45.786213+01:00 xenon kernel:   315.028781] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
2018-03-18T15:24:45.904207+01:00 xenon gnome-session-binary[3606]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
2018-03-18T15:25:43.186230+01:00 xenon kernel:   372.430779] NVRM: Xid (PCI:0000:01:00): 1, Channel 00000002 Method 00000060 Data beef0233
2018-03-18T15:25:43.285267+01:00 xenon gnome-session-binary[3606]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5
2018-03-18T15:25:43.285766+01:00 xenon gnome-session-binary[3606]: WARNING: App 'org.gnome.Shell.desktop' respawning too quickly

In /var/log/Xorg.0.log.old findet sich am Ende vierundzwanzig Mal hintereinander die Meldungsfolge


    89.244] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
    89.244] (II) NVIDIA(GPU-0):     Vision stereo.
    89.244] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    89.244] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
    89.244] (**) NVIDIA(0):     been enabled on all display devices.)
    89.322] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
    89.322] (II) NVIDIA(GPU-0):     Vision stereo.
    89.322] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    89.322] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
    89.322] (**) NVIDIA(0):     been enabled on all display devices.)

(natürlich mit zunehmenden Zeitstempeln) gefolgt von


   371.241] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
   371.508] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
   371.508] (II) input device 'Power Button', /dev/input/event2 is a keyboard
   371.509] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
   371.509] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
   371.565] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
   371.565] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
   371.566] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
   371.566] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
   372.858] (II) UnloadModule: "libinput"
   372.858] (II) UnloadModule: "libinput"
   372.858] (II) UnloadModule: "libinput"
   372.858] (II) UnloadModule: "libinput"
   373.639] (II) Server terminated successfully (0). Closing log file.

In /var/log/gdm/:0-greeter.log fand ich noch:


** (gnome-settings-daemon:4307): WARNING **: Schemas 'org.gnome.desktop.a11y' has not been setup

(gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation


(gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation


(gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation


(gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation


(gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-clip-stack-gl.c:419: GL error (1282): Invalid operation


(gnome-shell:4330): Cogl-WARNING **: driver/gl/cogl-framebuffer-gl.c:1022: GL error (1282): Invalid operation


(gnome-settings-daemon:4307): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon: Verbindung ist geschlossen

(gnome-settings-daemon:4307): GLib-GIO-WARNING **: Invalid id 4 passed to g_bus_unown_name()
gnome-session-binary[4282]: WARNING: Lost name on bus: org.gnome.SessionManager

Aktuell ist die Maschine per Textkonsole oder ssh normal benutzbar, die X-Oberfläche ist unbrauchbar.

Gibt es irgendetwas, was ich noch ausprobieren sollte, oder gehe ich besser gleich auf Nouveau zurück?

tilmanschmidt · March 18, 2018, 4:55pm

Nachtrag: in ~/.xsession-errors-:0 habe ich jetzt mehrfach


(gnome-shell:5019): Gdk-ERROR **: The program 'gnome-shell' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadMatch (invalid parameter attributes)'.
  (Details: serial 1787 error_code 8 request_code 134 (SYNC) minor_code 16)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the GDK_SYNCHRONIZE environment
   variable to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)
gnome-session-binary[4624]: WARNING: Application 'org.gnome.Shell.desktop' killed by signal 5

Meiner Erinnerung nach stand das vor dem Wechsel auf den proprietären Treiber da nicht.

Sauerland · March 18, 2018, 5:32pm

Poste die komplette /var/log/Xorg.0.log
Evtl. als Anhang in einer normalen Textdatei.

tilmanschmidt · March 18, 2018, 6:54pm

Die Forumssoftware sagt mir leider: You may not post attachments

Wenn ich die komplette /var/log/Xorg.0.log hier hereinpaste, sagt sie mir:The text that you have entered is too long (31627 characters). Please shorten it to 15000 characters long.

Hier also der erste Teil. Rest folgt.


   373.741]
X.Org X Server 1.18.3
Release Date: 2016-04-04
   373.741] X Protocol Version 11, Revision 0
   373.741] Build Operating System: openSUSE SUSE LINUX
   373.741] Current Operating System: Linux xenon 4.4.114-42-default #1 SMP Tue Feb 6 10:58:10 UTC 2018 (b6ee9ae) x86_64
   373.741] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.114-42-default root=/dev/mapper/RAID-root resume=/dev/RAID/swap showopts splash=verbose
   373.741] Build Date: 14 March 2018  10:01:54PM
   373.741]
   373.741] Current version of pixman: 0.34.0
   373.741]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
   373.741] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
   373.741] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 18 15:25:44 2018
   373.742] (==) Using config directory: "/etc/X11/xorg.conf.d"
   373.742] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
   373.743] (==) No Layout section.  Using the first Screen section.
   373.743] (==) No screen section available. Using defaults.
   373.743] (**) |-->Screen "Default Screen Section" (0)
   373.743] (**) |   |-->Monitor "<default monitor>"
   373.743] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
   373.743] (==) Automatically adding devices
   373.743] (==) Automatically enabling devices
   373.743] (==) Automatically adding GPU devices
   373.743] (==) Max clients allowed: 256, resource mask: 0x1fffff
   373.743] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
   373.743]    Entry deleted from font path.
   373.743] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
   373.744] (==) ModulePath set to "/usr/lib64/xorg/modules"
   373.744] (**) Extension "XFree86-DGA" is disabled
   373.744] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
   373.744] (II) Loader magic: 0x80cce0
   373.744] (II) Module ABI versions:
   373.744]    X.Org ANSI C Emulation: 0.4
   373.744]    X.Org Video Driver: 20.0
   373.744]    X.Org XInput driver : 22.1
   373.744]    X.Org Server Extension : 9.0
   373.750] (++) using VT number 7

   373.750] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
   373.751] (II) xfree86: Adding drm device (/dev/dri/card0)
   373.754] (--) PCI:*(0:1:0:0) 10de:0161:107d:56c4 rev 161, Mem @ 0xe1000000/16777216, 0xd0000000/268435456, 0xe0000000/16777216
   373.754] (II) LoadModule: "glx"
   373.755] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
   373.785] (II) Module glx: vendor="NVIDIA Corporation"
   373.785]    compiled for 4.0.2, module version = 1.0.0
   373.785]    Module class: X.Org Server Extension
   373.785] (II) NVIDIA GLX Module  304.137  Thu Sep 14 14:12:52 PDT 2017
   373.785] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
   373.786] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
   373.786] (==) Matched nvidia as autoconfigured driver 0
   373.786] (==) Matched nouveau as autoconfigured driver 1
   373.786] (==) Matched nv as autoconfigured driver 2
   373.786] (==) Matched nvidia as autoconfigured driver 3
   373.786] (==) Matched nouveau as autoconfigured driver 4
   373.786] (==) Matched nv as autoconfigured driver 5
   373.786] (==) Matched modesetting as autoconfigured driver 6
   373.786] (==) Matched fbdev as autoconfigured driver 7
   373.786] (==) Matched vesa as autoconfigured driver 8
   373.786] (==) Assigned the driver to the xf86ConfigLayout
   373.786] (II) LoadModule: "nvidia"
   373.786] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
   373.787] (II) Module nvidia: vendor="NVIDIA Corporation"
   373.788]    compiled for 4.0.2, module version = 1.0.0
   373.788]    Module class: X.Org Video Driver
   373.790] (II) LoadModule: "nouveau"
   373.790] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
   373.790] (II) Module nouveau: vendor="X.Org Foundation"
   373.791]    compiled for 1.18.3, module version = 1.0.15
   373.791]    Module class: X.Org Video Driver
   373.791]    ABI class: X.Org Video Driver, version 20.0
   373.791] (II) LoadModule: "nv"
   373.791] (WW) Warning, couldn't open module nv
   373.791] (II) UnloadModule: "nv"
   373.791] (II) Unloading nv
   373.791] (EE) Failed to load module "nv" (module does not exist, 0)
   373.792] (II) LoadModule: "modesetting"
   373.792] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
   373.792] (II) Module modesetting: vendor="X.Org Foundation"
   373.792]    compiled for 1.18.3, module version = 1.18.3
   373.792]    Module class: X.Org Video Driver
   373.792]    ABI class: X.Org Video Driver, version 20.0
   373.792] (II) LoadModule: "fbdev"
   373.793] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
   373.793] (II) Module fbdev: vendor="X.Org Foundation"
   373.793]    compiled for 1.18.3, module version = 0.4.4
   373.793]    Module class: X.Org Video Driver
   373.793]    ABI class: X.Org Video Driver, version 20.0
   373.793] (II) LoadModule: "vesa"
   373.793] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
   373.793] (II) Module vesa: vendor="X.Org Foundation"
   373.793]    compiled for 1.18.3, module version = 2.3.4
   373.793]    Module class: X.Org Video Driver
   373.794]    ABI class: X.Org Video Driver, version 20.0
   373.794] (II) NVIDIA dlloader X Driver  304.137  Thu Sep 14 13:52:41 PDT 2017
   373.794] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
   373.794] (II) NOUVEAU driver
   373.794] (II) NOUVEAU driver for NVIDIA chipset families :
   373.794]    RIVA TNT        (NV04)
   373.794]    RIVA TNT2       (NV05)
   373.794]    GeForce 256     (NV10)
   373.794]    GeForce 2       (NV11, NV15)
   373.794]    GeForce 4MX     (NV17, NV18)
   373.795]    GeForce 3       (NV20)
   373.795]    GeForce 4Ti     (NV25, NV28)
   373.795]    GeForce FX      (NV3x)
   373.795]    GeForce 6       (NV4x)
   373.795]    GeForce 7       (G7x)
   373.795]    GeForce 8       (G8x)
   373.795]    GeForce GTX 200 (NVA0)
   373.796]    GeForce GTX 400 (NVC0)
   373.796] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
   373.796] (II) FBDEV: driver for framebuffer: fbdev
   373.796] (II) VESA: driver for VESA chipsets: vesa
   373.796] (II) Loading sub module "fb"
   373.796] (II) LoadModule: "fb"
   373.796] (II) Loading /usr/lib64/xorg/modules/libfb.so
   373.797] (II) Module fb: vendor="X.Org Foundation"
   373.797]    compiled for 1.18.3, module version = 1.0.0
   373.797]    ABI class: X.Org ANSI C Emulation, version 0.4
   373.797] (II) Loading sub module "wfb"
   373.797] (II) LoadModule: "wfb"
   373.797] (II) Loading /usr/lib64/xorg/modules/libwfb.so
   373.798] (II) Module wfb: vendor="X.Org Foundation"
   373.798]    compiled for 1.18.3, module version = 1.0.0
   373.798]    ABI class: X.Org ANSI C Emulation, version 0.4
   373.798] (II) Loading sub module "ramdac"
   373.798] (II) LoadModule: "ramdac"
   373.798] (II) Module "ramdac" already built-in
   373.798] (WW) Falling back to old probe method for modesetting
   373.798] (WW) Falling back to old probe method for fbdev
   373.798] (II) Loading sub module "fbdevhw"
   373.798] (II) LoadModule: "fbdevhw"
   373.799] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
   373.799] (II) Module fbdevhw: vendor="X.Org Foundation"
   373.799]    compiled for 1.18.3, module version = 0.0.2
   373.799]    ABI class: X.Org Video Driver, version 20.0
   373.799] (WW) Falling back to old probe method for vesa
   373.799] (II) NVIDIA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
   373.799] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
   373.799] (==) NVIDIA(0): RGB weight 888
   373.799] (==) NVIDIA(0): Default visual is TrueColor
   373.799] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
   373.800] (**) NVIDIA(0): Enabling 2D acceleration
   374.432] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   374.432] (II) NVIDIA(GPU-0):     Vision stereo.
   374.514] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   374.514] (II) NVIDIA(GPU-0):     Vision stereo.
   374.517] (II) NVIDIA(0): NVIDIA GPU GeForce 6200 TurboCache(TM) (NV44) at PCI:1:0:0
   374.517] (II) NVIDIA(0):     (GPU-0)
   374.517] (--) NVIDIA(0): Memory: 131072 kBytes
   374.517] (--) NVIDIA(0): VideoBIOS: 05.44.02.15.07
   374.517] (II) NVIDIA(0): Detected PCI Express Link width: 16X
   374.518] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
   374.518] (--) NVIDIA(0): Valid display device(s) on GeForce 6200 TurboCache(TM) at PCI:1:0:0
   374.518] (--) NVIDIA(0):     CRT-0
   374.518] (--) NVIDIA(0):     CRT-1
   374.518] (--) NVIDIA(0):     TV-0
   374.518] (--) NVIDIA(0):     Philips 220SW (DFP-0) (connected)
   374.518] (--) NVIDIA(0):     Acer AL1721 (DFP-1) (connected)
   374.518] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
   374.518] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
   374.518] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
   374.518] (--) NVIDIA(0): TV encoder: Unknown
   374.518] (--) NVIDIA(0): Philips 220SW (DFP-0): 155.0 MHz maximum pixel clock
   374.518] (--) NVIDIA(0): Philips 220SW (DFP-0): Internal Single Link TMDS
   374.518] (--) NVIDIA(0): Acer AL1721 (DFP-1): 155.0 MHz maximum pixel clock
   374.518] (--) NVIDIA(0): Acer AL1721 (DFP-1): Internal Single Link TMDS
   374.518] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   374.518] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   374.518] (**) NVIDIA(0):     been enabled on all display devices.)
   374.519] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   374.519] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   374.519] (**) NVIDIA(0):     been enabled on all display devices.)
   374.519] (==) NVIDIA(0):
   374.519] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
   374.519] (==) NVIDIA(0):     will be used as the requested mode.
   374.519] (==) NVIDIA(0):
   374.519] (II) NVIDIA(0): Validated MetaModes:
   374.519] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
   374.519] (II) NVIDIA(0): Virtual screen size determined to be 2960 x 1050
   374.522] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
   374.522] (WW) NVIDIA(0): Unable to support custom viewPortOut 1680 x 945 +0 +52
   374.523] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
   374.523] (--) NVIDIA(0):     option
   374.523] (II) UnloadModule: "nouveau"
   374.523] (II) Unloading nouveau
   374.524] (II) UnloadModule: "modesetting"
   374.524] (II) Unloading modesetting
   374.524] (II) UnloadModule: "fbdev"
   374.524] (II) Unloading fbdev
   374.524] (II) UnloadSubModule: "fbdevhw"
   374.524] (II) Unloading fbdevhw
   374.524] (II) UnloadModule: "vesa"
   374.524] (II) Unloading vesa
   374.524] (--) Depth 24 pixmap format is 32 bpp
   374.535] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
   374.834] (==) NVIDIA(0): Disabling shared memory pixmaps
   374.834] (==) NVIDIA(0): Backing store enabled
   374.834] (==) NVIDIA(0): Silken mouse enabled
   374.835] (==) NVIDIA(0): DPMS enabled
   374.836] (II) Loading sub module "dri2"
   374.836] (II) LoadModule: "dri2"
   374.836] (II) Module "dri2" already built-in
   374.836] (II) NVIDIA(0): [DRI2] Setup complete
   374.836] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
   374.836] (--) RandR disabled
   374.846] (II) Initializing extension GLX
   374.846] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event2)
   375.012] (**) Power Button: Applying InputClass "evdev keyboard catchall"
   375.012] (**) Power Button: Applying InputClass "system-keyboard"
   375.012] (**) Power Button: Applying InputClass "evdev keyboard catchall"
   375.012] (**) Power Button: Applying InputClass "libinput keyboard catchall"
   375.012] (II) LoadModule: "libinput"
   375.012] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
   375.015] (II) Module libinput: vendor="X.Org Foundation"
   375.015]    compiled for 1.18.3, module version = 0.25.1
   375.015]    Module class: X.Org XInput Driver
   375.015]    ABI class: X.Org XInput driver, version 22.1
   375.015] (II) Using input driver 'libinput' for 'Power Button'
   375.015] (**) Power Button: always reports core events
   375.015] (**) Option "Device" "/dev/input/event2"
   375.015] (**) Option "_source" "server/udev"
   375.016] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
   375.016] (II) input device 'Power Button', /dev/input/event2 is a keyboard
   375.032] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
   375.032] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
   375.032] (**) Option "xkb_model" "pc105"
   375.032] (**) Option "xkb_layout" "de"
   375.032] (**) Option "xkb_variant" "nodeadkeys"
   375.032] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
   375.081] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
   375.081] (II) input device 'Power Button', /dev/input/event2 is a keyboard

tilmanschmidt · March 18, 2018, 6:58pm

Weiter geht’s:


   375.083] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
   375.083] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
   375.083] (**) Sleep Button: Applying InputClass "system-keyboard"
   375.083] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
   375.083] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
   375.083] (II) Using input driver 'libinput' for 'Sleep Button'
   375.083] (**) Sleep Button: always reports core events
   375.083] (**) Option "Device" "/dev/input/event1"
   375.083] (**) Option "_source" "server/udev"
   375.085] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
   375.085] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
   375.096] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
   375.096] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
   375.096] (**) Option "xkb_model" "pc105"
   375.096] (**) Option "xkb_layout" "de"
   375.096] (**) Option "xkb_variant" "nodeadkeys"
   375.096] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
   375.097] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
   375.097] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
   375.099] (II) config/udev: Adding input device HID 413c:3010 (/dev/input/event3)
   375.099] (**) HID 413c:3010: Applying InputClass "evdev pointer catchall"
   375.099] (**) HID 413c:3010: Applying InputClass "evdev pointer catchall"
   375.099] (**) HID 413c:3010: Applying InputClass "libinput pointer catchall"
   375.099] (II) Using input driver 'libinput' for 'HID 413c:3010'
   375.099] (**) HID 413c:3010: always reports core events
   375.099] (**) Option "Device" "/dev/input/event3"
   375.099] (**) Option "_source" "server/udev"
   375.157] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
   375.157] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
   375.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:413C:3010.0001/input/input3/event3"
   375.220] (II) XINPUT: Adding extended input device "HID 413c:3010" (type: MOUSE, id 8)
   375.220] (**) Option "AccelerationScheme" "none"
   375.220] (**) HID 413c:3010: (accel) selected scheme none/0
   375.221] (**) HID 413c:3010: (accel) acceleration factor: 2.000
   375.221] (**) HID 413c:3010: (accel) acceleration threshold: 4
   375.277] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
   375.277] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
   375.279] (II) config/udev: Adding input device HID 413c:3010 (/dev/input/mouse0)
   375.279] (II) No input driver specified, ignoring this device.
   375.279] (II) This device may have been added with another device file.
   375.280] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
   375.280] (II) No input driver specified, ignoring this device.
   375.280] (II) This device may have been added with another device file.
   375.282] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
   375.282] (II) No input driver specified, ignoring this device.
   375.282] (II) This device may have been added with another device file.
   375.283] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
   375.283] (II) No input driver specified, ignoring this device.
   375.283] (II) This device may have been added with another device file.
   375.284] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event8)
   375.284] (II) No input driver specified, ignoring this device.
   375.284] (II) This device may have been added with another device file.
   375.285] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
   375.285] (II) No input driver specified, ignoring this device.
   375.286] (II) This device may have been added with another device file.
   375.287] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
   375.287] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
   375.287] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
   375.287] (**) AT Translated Set 2 keyboard: always reports core events
   375.287] (**) Option "Device" "/dev/input/event0"
   375.287] (**) Option "_source" "server/udev"
   375.288] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
   375.288] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
   375.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
   375.308] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
   375.308] (**) Option "xkb_model" "pc105"
   375.308] (**) Option "xkb_layout" "de"
   375.308] (**) Option "xkb_variant" "nodeadkeys"
   375.308] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
   375.310] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
   375.310] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
   375.311] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
   375.311] (II) No input driver specified, ignoring this device.
   375.311] (II) This device may have been added with another device file.
   376.978] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   376.978] (II) NVIDIA(GPU-0):     Vision stereo.
   376.978] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   376.979] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   376.979] (**) NVIDIA(0):     been enabled on all display devices.)
   377.056] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   377.056] (II) NVIDIA(GPU-0):     Vision stereo.
   377.056] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   377.056] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   377.056] (**) NVIDIA(0):     been enabled on all display devices.)
   377.240] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   377.240] (II) NVIDIA(GPU-0):     Vision stereo.
   377.241] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   377.241] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   377.241] (**) NVIDIA(0):     been enabled on all display devices.)
   377.318] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   377.318] (II) NVIDIA(GPU-0):     Vision stereo.
   377.318] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   377.318] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   377.318] (**) NVIDIA(0):     been enabled on all display devices.)
   380.184] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   380.184] (II) NVIDIA(GPU-0):     Vision stereo.
   380.184] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   380.184] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   380.184] (**) NVIDIA(0):     been enabled on all display devices.)
   380.265] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   380.265] (II) NVIDIA(GPU-0):     Vision stereo.
   380.265] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   380.265] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   380.265] (**) NVIDIA(0):     been enabled on all display devices.)
   398.907] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
   399.182] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
   399.183] (II) input device 'Power Button', /dev/input/event2 is a keyboard
   399.184] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
   399.184] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
   399.241] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
   399.241] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
   399.242] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
   399.242] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
   444.427] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
   444.704] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
   444.704] (II) input device 'Power Button', /dev/input/event2 is a keyboard
   444.705] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
   444.705] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
   444.761] (II) input device 'HID 413c:3010', /dev/input/event3 is tagged by udev as: Mouse
   444.761] (II) input device 'HID 413c:3010', /dev/input/event3 is a pointer caps
   444.762] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
   444.762] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
   454.734] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   454.734] (II) NVIDIA(GPU-0):     Vision stereo.
   454.734] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   454.734] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   454.734] (**) NVIDIA(0):     been enabled on all display devices.)
   454.811] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   454.811] (II) NVIDIA(GPU-0):     Vision stereo.
   454.811] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   454.811] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   454.811] (**) NVIDIA(0):     been enabled on all display devices.)
   455.003] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   455.003] (II) NVIDIA(GPU-0):     Vision stereo.
   455.003] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   455.003] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   455.003] (**) NVIDIA(0):     been enabled on all display devices.)
   455.080] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   455.080] (II) NVIDIA(GPU-0):     Vision stereo.
   455.080] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   455.080] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   455.081] (**) NVIDIA(0):     been enabled on all display devices.)
   457.848] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   457.848] (II) NVIDIA(GPU-0):     Vision stereo.
   457.848] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   457.848] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   457.848] (**) NVIDIA(0):     been enabled on all display devices.)
   457.930] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   457.930] (II) NVIDIA(GPU-0):     Vision stereo.
   457.930] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   457.930] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   457.930] (**) NVIDIA(0):     been enabled on all display devices.)
   519.511] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   519.512] (II) NVIDIA(GPU-0):     Vision stereo.
   519.512] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   519.512] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   519.512] (**) NVIDIA(0):     been enabled on all display devices.)
   519.589] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   519.589] (II) NVIDIA(GPU-0):     Vision stereo.
   519.589] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   519.589] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   519.589] (**) NVIDIA(0):     been enabled on all display devices.)
   519.778] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   519.778] (II) NVIDIA(GPU-0):     Vision stereo.
   519.778] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   519.778] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   519.778] (**) NVIDIA(0):     been enabled on all display devices.)
   519.856] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   519.856] (II) NVIDIA(GPU-0):     Vision stereo.
   519.856] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   519.856] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   519.856] (**) NVIDIA(0):     been enabled on all display devices.)
   522.129] (II) NVIDIA(GPU-0): Display (Philips 220SW (DFP-0)) does not support NVIDIA 3D
   522.129] (II) NVIDIA(GPU-0):     Vision stereo.
   522.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   522.129] (**) NVIDIA(0):     device Philips 220SW (DFP-0) (Using EDID frequencies has
   522.129] (**) NVIDIA(0):     been enabled on all display devices.)
   522.206] (II) NVIDIA(GPU-0): Display (Acer AL1721 (DFP-1)) does not support NVIDIA 3D
   522.206] (II) NVIDIA(GPU-0):     Vision stereo.
   522.207] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
   522.207] (**) NVIDIA(0):     device Acer AL1721 (DFP-1) (Using EDID frequencies has
   522.207] (**) NVIDIA(0):     been enabled on all display devices.)

Hat immer noch nicht ganz gepasst, aber der Rest sind nur weitere Wiederholungen der letzten 10 Zeilen mit neuen Timestamps.