stipi69
August 13, 2017, 11:35am
#1
Hellou comunity
Just freshly installed Leap 42.3 and as on anny other distro (just to make sure), wifi does not goes on.
My Wlan module is Broadcom BCM43142 802.11b/g/n
Does annyone has suggestions howto turn it on?
I installed [broadcom-wl driver and below is my console poutput:
linux-qubv:/home/stipi69 # lspci -nnk | grep -A2 0280https://www.broadcom.com/support/802.11 )
broadcom-wl and broadcom-wl-kmp-default from Packman Repo?
stipi69
August 13, 2017, 12:05pm
#3
Yes i have both installed i just rechecked
Hi
mkinitrd
lspci -nnk |grep -A3 Network
systemctl reboot
In the lspci output you should see wl present.
malcolmlewis:
Hi
mkinitrd
lspci -nnk |grep -A3 Network
systemctl reboot
In the lspci output you should see wl present.
I Followed your steps and get: (still no WIFI)
https://www.dropbox.com/s/spdmw81vu9kh1yq/output?dl=0
output file link
Post:
lspci -nnk |grep -A3 Network
zypper se -si broadcom
zypper lr -d
Use an Copy/Paste and Code-Tags here in the Forum, not dropbox.
Ok, hope this is the right way to post this text otherwise i must read through rules
stipi69@linux-qubv:~> su
Password:
linux-qubv:/home/stipi69 # lspci -nnk |grep -A3 Network
02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Lite-On Communications Inc Device [11ad:6675]
Kernel modules: bcma
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5286 PCI Express Card Reader [10ec:5286] (rev 01)
linux-qubv:/home/stipi69 # zypper se -si broadcom
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+-------------------------+---------+-----------------------------+--------+-------------------
i+ | broadcom-wl | package | 6.30.223.271-6.1 | x86_64 | Packman-Repository
i+ | broadcom-wl-kmp-default | package | 6.30.223.271_k4.1.39_56-6.1 | x86_64 | Packman-Repository
i+ | broadcom-wl-kmp-pv | package | 6.30.223.271_k4.1.39_56-6.1 | x86_64 | Packman-Repository
i+ | broadcom-wl-kmp-xen | package | 6.30.223.271_k4.1.39_56-6.1 | x86_64 | Packman-Repository
linux-qubv:/home/stipi69 # zypper lr -d
Repository priorities are without effect. All enabled repositories share the same priority.
# | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service
---+-------------------------------------+-----------------------------------------+---------+-----------+---------+----------+--------+--------------------------------------------------------------------------------+--------
1 | Packman-Repository | Packman-Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_42.1/ |
2 | http-download.opensuse.org-0c0104e1 | home:mhnovell | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/repositories/home:/mhnovell/openSUSE_Leap_42.3/ |
3 | http-download.opensuse.org-a39509e8 | multimedia:libs | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_Leap_42.3/ |
4 | http-download.opensuse.org-b2c8a653 | multimedia:apps | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/repositories/multimedia:/apps/openSUSE_Leap_42.3/ |
5 | http-opensuse-guide.org-72e62fce | libdvdcss repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_42.3/ |
6 | openSUSE-Leap-42.3-0 | openSUSE-Leap-42.3-0 | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/distribution/leap/42.3/repo/oss/ |
7 | repo-debug | openSUSE-Leap-42.3-Debug | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distribution/leap/42.3/repo/oss/ |
8 | repo-debug-non-oss | openSUSE-Leap-42.3-Debug-Non-Oss | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distribution/leap/42.3/repo/non-oss/ |
9 | repo-debug-update | openSUSE-Leap-42.3-Update-Debug | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/leap/42.3/oss/ |
10 | repo-debug-update-non-oss | openSUSE-Leap-42.3-Update-Debug-Non-Oss | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/leap/42.3/non-oss/ |
11 | repo-non-oss | openSUSE-Leap-42.3-Non-Oss | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/distribution/leap/42.3/repo/non-oss/ |
12 | repo-source | openSUSE-Leap-42.3-Source | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribution/leap/42.3/repo/oss/ |
13 | repo-source-non-oss | openSUSE-Leap-42.3-Source-Non-Oss | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribution/leap/42.3/repo/non-oss/ |
14 | repo-update | openSUSE-Leap-42.3-Update | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/42.3/oss/ |
15 | repo-update-non-oss | openSUSE-Leap-42.3-Update-Non-Oss | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/42.3/non-oss/ |
linux-qubv:/home/stipi69 #
1 | Packman-Repository | Packman-Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_42.1/
Wrong Packman Repo, this is for Leap 42.1, but you have 42.3 installed.
And the brodcom-wl is because of that not for the 42.3 Kernel build, it is build for 42.1 Kernel.
And I also would delete the multimedia:libs Repo, it can make Trouble with Packman Repo…
stipi69
August 13, 2017, 5:25pm
#10
Sauerland:
Wrong Packman Repo, this is for Leap 42.1, but you have 42.3 installed.
And the brodcom-wl is because of that not for the 42.3 Kernel build, it is build for 42.1 Kernel.
Embarrassed
Sorry to open new thread for my error and waste your time, annyway you helped alot, after switching to newer version of packman repo and reboot it worked like it should
you all are awesome
Greetings
It was “no waste of Time”, I think you learned something…
And please delete the multimedia:libs Repo…
Really grateful!!!