I get the feeling now that I have the wrong packageā¦
my kernel message:
->usbcore: registered new interface driver rt2870.
Please post output of ls /etc/Wireless command
etc/Wireless resite both rt2870sta and rt3070sta.
Remove RT2870STA directory from /etc/Wireless
After that, try again: remove usb dongle, unload rt3070sta module, plug dongle again, check interfaces.
I removed the etc/Wireless/rt2870sta/ dir
I still get that same kernel message from the rt3070sta driver.
He register the rt2870 interface driver.
Do u have files in this dir /proc/bus/usb/devices?
It must resite a filedescriptor for the USB device.
Did you unplug adapter and unload module, after removing RT2870STA directory?
rmmod rt3070sta
And again
ls /etc/Wireless
Is there other directories, exept RT3070STA ?
i have empty /proc/bus/usb
novsanā¦ Can u post a direct link to the rt3070sta driver u used.
Cause I need to get lot more kernel messages then I have now.
no problem:
#> ls /lib/modules/$(uname -r)/updates/
rt3070sta.ko
or you need link to package?
The link to the package novsan. The direct link from the package u used.
Tnxā¦
Package depends of kernel version
For 2.6.31.5-0.1-desktop version:
http://download.opensuse.org/repositories/driver:/wireless/openSUSE_11.2/i586/rt3070sta-kmp-desktop-2.1.2.0_2.6.31.5_0.1-1.1.i586.rpm
http://download.opensuse.org/repositories/driver:/wireless/openSUSE_11.2/i586/rt3070sta-common-2.1.2.0-1.1.i586.rpm
Please check your kernel version:
uname -r
I installed the 2.6.31.12-0.2 driver package.
How can I remove this driver before I install the new package?
it happens 
remove wrong package with rpm -e command and install right version
rpm -qa | grep rt3070sta-kmp | xargs rpm -e
He reply āthe package was never installedā??
i installed it with rpm -Fhv /.rpm .
Please post output of
rpm -qa | grep rt3070sta
No outputā¦
They are not installed.
Can I install with Yast?
Where did the rt3070sta.ko come from then, when not installed?
Ok, install rpms with
rpm -ihv rt3070sta-kmp-desktop-2.1.2.0_2.6.31.5_0.1-1.1.i586.rpm rt3070sta-common-2.1.2.0-1.1.i586.rpm
**rpm -F ** used to freshen package
Niceā¦
Interface is linked to ip and set up.
The led on the device is blinking.
How can I set up DHCP for this interface?
Yast network manager give error āNo network runningā.
