OpenSUSE 15.6 Leap loses audio cards after every reboot
aplay -l
aplay: device_list:277: no soundcards found…
http://alsa-project.org/db/?f=fde308d90e4493cb974f441005ee487251763671
yast
YAST “reset all” fixes the audio cards till reboot, but analog sound does not appear
http://alsa-project.org/db/?f=c73c2236e57891cd0deacb9b3fc95501cf048217
pavucontrol
headphones (plugged in) - turn on sounds on internal speaker and headphones
line out (plugged in) - plays, but no sound
pactl get-default-sink
alsa_output.pci-0000_00_1b.0.analog-stereo
pactl set-sink-mute
pactl get-default-sink0
amixer
Simple mixer control ‘Master’,0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 65536 [100%] [on]
Front Right: Playback 65536 [100%] [on]
Simple mixer control ‘Capture’,0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 65536 [100%] [on]
Front Right: Capture 65536 [100%] [on]
aplay 2.0.wav
Playing WAVE ‘2.0.wav’ : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
But no sound
pactl list sinks
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = “16”
device.api = “alsa”
device.class = “sound”
alsa.class = “generic”
alsa.subclass = “generic-mix”
alsa.name = “ALC892 Analog”
alsa.id = “ALC892 Analog”
alsa.subdevice = “0”
alsa.subdevice_name = “subdevice #0”
alsa.device = “0”
alsa.card = “1”
alsa.card_name = “HDA Intel PCH”
alsa.long_card_name = “HDA Intel PCH at 0xf7d10000 irq 30”
alsa.driver_name = “snd_hda_intel”
device.bus_path = “pci-0000:00:1b.0”
sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
device.bus = “pci”
device.vendor.id = “8086”
device.vendor.name = “Intel Corporation”
device.product.id = “8c20”
device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
device.form_factor = “internal”
device.string = “front:1”
device.buffering.buffer_size = “352800”
device.buffering.fragment_size = “176400”
device.access_mode = “mmap+timer”
device.profile.name = “analog-stereo”
device.profile.description = “Analog Stereo”
device.description = “Built-in Audio Analog Stereo”
module-udev-detect.discovered = “1”
device.icon_name = “audio-card-pci”
Ports:
analog-output-lineout: Line Out (type: Line, priority: 9000, available)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, available)
Active Port: analog-output-lineout
Formats:
pcm
Sink #3
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.hdmi-surround
Description: Built-in Audio Digital Surround 5.1 (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 6ch 44100Hz
Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe
Owner Module: 6
Mute: no
Volume: front-left: 58981 / 90% / -2.75 dB, front-right: 58981 / 90% / -2.75 dB, rear-left: 58981 / 90% / -2.75 dB, rear-right: 58981 / 90% / -2.75 dB, front-center: 58981 / 90% / -2.75 dB, lfe: 58981 / 90% / -2.75 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.hdmi-surround.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = “16”
device.api = “alsa”
device.class = “sound”
alsa.class = “generic”
alsa.subclass = “generic-mix”
alsa.name = “Philips FTV”
alsa.id = “HDMI 0”
alsa.subdevice = “0”
alsa.subdevice_name = “subdevice #0”
alsa.device = “3”
alsa.card = “0”
alsa.card_name = “HDA Intel HDMI”
alsa.long_card_name = “HDA Intel HDMI at 0xf7d14000 irq 28”
alsa.driver_name = “snd_hda_intel”
device.bus_path = “pci-0000:00:03.0”
sysfs.path = “/devices/pci0000:00/0000:00:03.0/sound/card0”
device.bus = “pci”
device.vendor.id = “8086”
device.vendor.name = “Intel Corporation”
device.product.id = “0c0c”
device.product.name = “Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller”
device.form_factor = “internal”
device.string = “hdmi:0”
device.buffering.buffer_size = “1058304”
device.buffering.fragment_size = “529152”
device.access_mode = “mmap+timer”
device.profile.name = “hdmi-surround”
device.profile.description = “Digital Surround 5.1 (HDMI)”
device.description = “Built-in Audio Digital Surround 5.1 (HDMI)”
module-udev-detect.discovered = “1”
device.icon_name = “audio-card-pci”
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
Active Port: hdmi-output-0
Formats:
pcm