I tried to connect by configuring my ASDL to PPPOE by 192.168.1.1 in the browser. It should be able to connect. But I can’t seem to receive any data (the data LED isn’t blinking when it should). I’m using wired LAN.
Seems like LAN isn’t configured.
Or is it?
What is wrong here?
Just go in to YaST - Network Devices - Network Settings
Select the listed eth0 device and edit it and just move thru the settings accepting the defaults.
Next time you post, provide more info
Like what version of SUSE, what network device you have and the router type etc…
I’ve tried that but it doesnt seem to work.
the network device is Marvell Yukon 88E8071 PCI-E Gigabit Ethernet.
Box: openSUSE 11.2 | (KDE4.3.5) | Acer R03-B1 motherboard | AMD64 X2 5200+ | ATi Radeon HD 4670 | 3GB RAM
open a terminal and paste in this and hit enter, then post the result
/sbin/lspci -nnk
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7911]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913]
Kernel driver in use: pcieport-driver
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915]
Kernel driver in use: pcieport-driver
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
Kernel driver in use: pcieport-driver
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Kernel driver in use: k8temp
01:05.0 Display controller [0380]: ATI Technologies Inc Radeon 2100 [1002:796e]
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
02:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV730XT [Radeon HD 4670] [1002:9490]
Subsystem: PC Partner Limited Device [174b:e107]
02:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
Subsystem: PC Partner Limited R700 Audio Device [Radeon HD 4000 Series] [174b:aa38]
Kernel driver in use: HDA Intel
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller [11ab:436b] (rev 16)
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: sky2
04:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380]
Subsystem: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380]
Kernel driver in use: ohci1394
Box: openSUSE 11.2 | (KDE4.3.1 “release 6”) | Acer R03-B1 motherboard | AMD64 X2 5200+ | ATi Radeon HD 4670 | 3GB RAM
So this is your device
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller [11ab:436b] (rev 16)
Subsystem: Acer Incorporated [ALI] Device [1025:0155]
Kernel driver in use: sky2
The driver listed is sky2
I found this config info. Apparently it will work, just follow this
Configure Marvell Network Card - openSUSE