I am explicitly following upgrade per: https://en.opensuse.org/SDB:System_upgrade. Repos shown below. All are enabled as suggested in the instructions and have been refreshed and updates made.
When I run the zypper dup as below, I get 98 error issues. See below:
localhost:/home/tom # zypper --releasever=15.3 dup
Warning: Enforced setting: $releasever=15.3
Loading repository data...
Reading installed packages...
Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command.
Computing distribution upgrade...
98 Problems:
Problem: problem with installed package blas-devel-3.9.0-lp152.34.1.x86_64
Problem: problem with installed package cblas-devel-20110120-lp152.11.4.x86_64
Problem: problem with installed package lapack-devel-3.9.0-lp152.34.1.x86_64
Problem: problem with installed package libamd2-2.4.6-lp152.79.1.x86_64
Problem: problem with installed package libblas3-3.9.0-lp152.34.1.x86_64
Problem: problem with installed package libbtf1-1.2.6-lp152.79.1.x86_64
Problem: problem with installed package libcamd2-2.4.6-lp152.79.1.x86_64
Problem: problem with installed package libcblas3-20110120-lp152.11.4.x86_64
Problem: problem with installed package libccolamd2-2.9.6-lp152.79.1.x86_64
Problem: problem with installed package libcholmod3-3.0.14-lp152.79.1.x86_64
Problem: problem with installed package libcolamd2-2.9.6-lp152.79.1.x86_64
Problem: problem with installed package libcxsparse3-3.2.0-lp152.79.1.x86_64
Problem: problem with installed package libklu1-1.3.9-lp152.79.1.x86_64
Problem: problem with installed package liblapack3-3.9.0-lp152.34.1.x86_64
Problem: problem with installed package libsuitesparseconfig5-5.10.1-lp152.79.1.x86_64
Problem: problem with installed package libumfpack5-5.7.8-lp152.79.1.x86_64
Problem: problem with installed package opencl-headers-1.2-lp152.2.1.noarch
Problem: problem with installed package AppStream-0.14.3-lp152.6.1.x86_64
Problem: problem with installed package AppStream-lang-0.14.3-lp152.6.1.noarch
Problem: problem with installed package R-KernSmooth-2.23.20-lp152.42.1.x86_64
Problem: problem with installed package R-MASS-7.3.54-lp152.42.1.x86_64
Problem: problem with installed package R-Matrix-1.3.3-lp152.42.1.x86_64
Problem: problem with installed package R-base-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-base-devel-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-boot-1.3.28-lp152.42.1.x86_64
Problem: problem with installed package R-class-7.3.19-lp152.42.1.x86_64
Problem: problem with installed package R-cluster-2.1.2-lp152.42.1.x86_64
Problem: problem with installed package R-codetools-0.2.18-lp152.42.1.x86_64
Problem: problem with installed package R-compiler-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-core-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-core-devel-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-core-doc-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-core-libs-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-core-packages-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-datasets-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-foreign-0.8.81-lp152.42.1.x86_64
Problem: problem with installed package R-grDevices-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-graphics-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-grid-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-lattice-0.20.44-lp152.42.1.x86_64
Problem: problem with installed package R-methods-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-mgcv-1.8.35-lp152.42.1.x86_64
Problem: problem with installed package R-nlme-3.1.152-lp152.42.1.x86_64
Problem: problem with installed package R-nnet-7.3.16-lp152.42.1.x86_64
Problem: problem with installed package R-parallel-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-recommended-packages-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-rpart-4.1.15-lp152.42.1.x86_64
Problem: problem with installed package R-spatial-7.3.14-lp152.42.1.x86_64
Problem: problem with installed package R-splines-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-stats-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-stats4-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-survival-3.2.11-lp152.42.1.x86_64
Problem: problem with installed package R-tcltk-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-tools-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package R-utils-4.1.0-lp152.42.1.x86_64
Problem: problem with installed package bleachbit-4.2.0-2.1.noarch
Problem: problem with installed package blender-2.92.0-lp152.401.21.x86_64
Problem: problem with installed package blender-cycles-devel-2.92.0-lp152.401.21.noarch
Problem: problem with installed package blender-lang-2.92.0-lp152.401.21.noarch
Problem: problem with installed package fftw3-devel-3.3.9-lp152.5.1.x86_64
Problem: problem with installed package fftw3-threads-devel-3.3.9-lp152.5.1.x86_64
Problem: problem with installed package gmp-devel-6.2.0-lp152.3.1.x86_64
Problem: problem with installed package gnuchess-6.2.8-lp152.189.1.x86_64
Problem: problem with installed package gpsbabel-1.5.4-lp152.47.4.x86_64
Problem: problem with installed package javapackages-filesystem-5.3.1-lp152.112.1.x86_64
Problem: problem with installed package javapackages-tools-5.3.1-lp152.112.1.x86_64
Problem: problem with installed package libAlembic1_7-1.7.16-lp152.16.1.x86_64
Problem: problem with installed package libMagick++-7_Q16HDRI4-7.0.10.53-lp152.553.2.x86_64
Problem: problem with installed package libOpenImageDenoise0-1.1.0-lp152.9.6.x86_64
Problem: problem with installed package libOpenImageIO2_2-2.2.13.1-lp152.67.1.x86_64
Problem: problem with installed package libbox2d2-2.4.1-lp152.14.1.x86_64
Problem: problem with installed package libfftw3-3-3.3.9-lp152.5.1.x86_64
Problem: problem with installed package libfftw3_threads3-3.3.9-lp152.5.1.x86_64
Problem: problem with installed package libgmp10-6.2.0-lp152.3.1.x86_64
Problem: problem with installed package libgmpxx4-6.2.0-lp152.3.1.x86_64
Problem: problem with installed package libkea1_4-1.4.10-lp152.16.2.x86_64
Problem: problem with installed package libpodofo0_9_6-0.9.6-lp152.71.9.x86_64
Problem: problem with installed package libportmidi0-217-lp152.2.4.x86_64
Problem: problem with installed package libproj19-7.0.0-lp152.52.1.x86_64
Problem: problem with installed package libqwt6-6.1.6-lp152.2.1.x86_64
Problem: problem with installed package libtbb2-2020.3-lp152.81.1.x86_64
Problem: problem with installed package python2-service_identity-18.1.0-lp152.28.1.noarch
Problem: problem with installed package python3-OWSLib-0.23.0-lp152.14.1.noarch
Problem: problem with installed package python3-PyAudio-0.2.11-lp152.11.3.x86_64
Problem: problem with installed package python3-numpy-1.19.5-lp152.88.2.x86_64
Problem: problem with installed package python3-numpy-devel-1.19.5-lp152.88.2.x86_64
Problem: problem with installed package python3-pyproj-3.0.1-lp152.31.3.x86_64
Problem: problem with installed package python3-service_identity-18.1.0-lp152.28.1.noarch
Problem: problem with installed package timidity-2.15.0-lp152.2.1.x86_64
Problem: problem with installed package wine-32bit-6.10-lp152.1347.1.x86_64
Problem: problem with installed package wine-6.10-lp152.1347.1.x86_64
Problem: problem with installed package wine-gecko-2.47.2-lp152.63.1.noarch
Problem: nothing provides /usr/bin/pidof needed by lsb-4.0.fake-lp153.1.1.x86_64
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Problem: nothing provides libvidstab.so.1.1 needed by libavfilter7-4.2.1-pm153.3.1.i586
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Problem: gimp-plugins-python-2.10.12-3.3.7.x86_64 requires gimp = 2.10.12, but this requirement cannot be provided
Problem: problem with installed package blas-devel-3.9.0-lp152.34.1.x86_64
Solution 1: install blas-devel-3.9.0-lp153.35.1.x86_64 (with vendor change)
openSUSE-Education --> obs://build.opensuse.org/science
Solution 2: keep obsolete blas-devel-3.9.0-lp152.34.1.x86_64
Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c/d/?] (c): c
Text at the bottom refers to problem file #1 and offers solution.
Did I do something wrong? Do I need to go through each problem and resolve independently?
For now I changed back to 15.2 until I get a procedure to move ahead.
I do all my 15.2 to 15.3 with only 3 repos - it is impossible to update all the others as they do not know what is going to be installed as they may need repos to be accepted and the dup does not do that
from you list I would do 9 10 11 and disable 1 2 3 4 5 6 7 8 12 13 14
after the 1000’s of downloads finish you need to go to command mode (ctrl+alt+f3) and login as root
allow all the changes - there will be some but that is normal
you run these comands in command mode screen - you will break things if run in the gui as libraries that are running will change and the gui will crash.
You will get the next choice/solution once you answered the first question.
I would suggest to allow changing vendor, that just means the package comes from another repo. You can also accomplish that by adding “–allow-vendor-change” to your “zypper dup”.
Review the list that remains after that.
The suggestion to only enable the “core repo’s” will make the update possible but probably means that you will run into problems when you enable them again, and likely that is not wanted.
Not solved yet. Need advice. I modified zypper dup command to include --allow-vendor-change and ran as below. I still have all repos enabled.
localhost:/home/tom # zypper --releasever=15.3 dup --allow-vendor-change
Warning: Enforced setting: $releasever=15.3
Loading repository data...
Reading installed packages...
Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command.
Computing distribution upgrade...
5 Problems:
Problem: nothing provides /usr/bin/pidof needed by lsb-4.0.fake-lp153.1.1.x86_64
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Problem: nothing provides libvidstab.so.1.1 needed by libavfilter7-4.2.1-pm153.3.1.i586
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Problem: nothing provides /usr/bin/pidof needed by lsb-4.0.fake-lp153.1.1.x86_64
Solution 1: Following actions will be done:
deinstallation of lsb-4.0-lp152.4.4.x86_64
deinstallation of atom-1.57.0-0.1.x86_64
Solution 2: keep obsolete lsb-4.0-lp152.4.4.x86_64
Solution 3: break lsb-4.0.fake-lp153.1.1.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 2
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Solution 1: Following actions will be done:
keep obsolete libavcodec58-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswresample3-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavutil56-4.2.1-pm152.2.9.3.x86_64
Solution 2: deinstallation of libavcodec58-4.2.1-pm152.2.9.3.x86_64
Solution 3: break libavcodec58-4.2.1-pm153.3.1.i586 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 1
Problem: nothing provides libvidstab.so.1.1 needed by libavfilter7-4.2.1-pm153.3.1.i586
Solution 1: Following actions will be done:
keep obsolete libavfilter7-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavresample4-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswscale5-4.2.1-pm152.2.9.3.x86_64
keep obsolete libpostproc55-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswresample3-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavutil56-4.2.1-pm152.2.9.3.x86_64
Solution 2: deinstallation of libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 3: break libavfilter7-4.2.1-pm153.3.1.i586 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 1
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Solution 1: Following actions will be done:
keep obsolete libavformat58-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavutil56-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswresample3-4.2.1-pm152.2.9.3.x86_64
Solution 2: deinstallation of libavformat58-4.2.1-pm152.2.9.3.x86_64
Solution 3: break libavcodec58-4.2.1-pm153.3.1.i586 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 1
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Solution 1: Following actions will be done:
keep obsolete libavdevice58-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavutil56-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavresample4-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswscale5-4.2.1-pm152.2.9.3.x86_64
keep obsolete libpostproc55-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswresample3-4.2.1-pm152.2.9.3.x86_64
Solution 2: deinstallation of libavdevice58-4.2.1-pm152.2.9.3.x86_64
Solution 3: break libavcodec58-4.2.1-pm153.3.1.i586 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 1
Resolving dependencies...
Computing distribution upgrade...
5 Problems:
Problem: libQtAV1-1.13.0-bp153.1.28.x86_64 requires libavresample.so.4.0()(64bit), but this requirement cannot be provided
Problem: libavfilter7-4.2.1-pm152.2.9.3.x86_64 requires libavresample.so.4()(64bit), but this requirement cannot be provided
Problem: libavfilter7-4.2.1-pm152.2.9.3.x86_64 requires libavresample.so.4()(64bit), but this requirement cannot be provided
Problem: libavdevice58-4.2.1-pm152.2.9.3.x86_64 requires libavfilter.so.7()(64bit), but this requirement cannot be provided
Problem: libavdevice58-4.2.1-pm152.2.9.3.x86_64 requires libavfilter.so.7()(64bit), but this requirement cannot be provided
Problem: libQtAV1-1.13.0-bp153.1.28.x86_64 requires libavresample.so.4.0()(64bit), but this requirement cannot be provided
not installable providers: libavresample4_0-4.4-pm153.2.2.x86_64[ftp.gwdg.de-openSUSE_Leap_$releasever]
libavresample4_0-4.4-bp153.1.1.x86_64[repo-oss]
Solution 1: deinstallation of libQtAV1-1.13.0-lp152.2.5.x86_64
Solution 2: keep obsolete libQtAV1-1.13.0-lp152.2.5.x86_64
Solution 3: remove lock to allow removal of libavresample4-4.2.1-pm152.2.9.3.x86_64
Solution 4: break libQtAV1-1.13.0-bp153.1.28.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/4/s/r/c/d/?] (c): 2
Problem: libavfilter7-4.2.1-pm152.2.9.3.x86_64 requires libavresample.so.4()(64bit), but this requirement cannot be provided
deleted providers: libavresample4-4.2.1-pm152.2.9.3.x86_64
Solution 1: deinstallation of digikam-6.4.0-lp152.2.14.x86_64
Solution 2: keep obsolete digikam-6.4.0-lp152.2.14.x86_64
Solution 3: remove lock to allow removal of libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 4: break libavfilter7-4.2.1-pm152.2.9.3.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/4/s/r/c/d/?] (c): 2
Problem: libavfilter7-4.2.1-pm152.2.9.3.x86_64 requires libavresample.so.4()(64bit), but this requirement cannot be provided
deleted providers: libavresample4-4.2.1-pm152.2.9.3.x86_64
Solution 1: deinstallation of digikam-plugins-6.4.0-lp152.2.14.x86_64
Solution 2: deinstallation of libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 3: keep obsolete digikam-plugins-6.4.0-lp152.2.14.x86_64
Solution 4: break libavfilter7-4.2.1-pm152.2.9.3.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/4/s/r/c/d/?] (c): 3
Problem: libavdevice58-4.2.1-pm152.2.9.3.x86_64 requires libavfilter.so.7()(64bit), but this requirement cannot be provided
deleted providers: libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 1: deinstallation of showfoto-6.4.0-lp152.2.14.x86_64
Solution 2: keep obsolete showfoto-6.4.0-lp152.2.14.x86_64
Solution 3: remove lock to allow removal of libavdevice58-4.2.1-pm152.2.9.3.x86_64
Solution 4: break libavdevice58-4.2.1-pm152.2.9.3.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/4/s/r/c/d/?] (c): c
This time I first got 5 problems. I made option selections for this 5 and 5 more appeared. Perhaps, I still have the initial 98 and are getting the problems 5 at a time.
Am I better off selecting the “deinstallation” option or the “keep obsolete” option for these files? Based up on advice I receive, I will cycle through the problems to start the dup. Hopefully, I can repair what I need afterwards.
I will next try reduced repo approach as suggested above.
Problem: nothing provides /usr/bin/pidof needed by lsb-4.0.fake-lp153.1.1.x86_64
Solution 1: Following actions will be done:
deinstallation of lsb-4.0-lp152.4.4.x86_64
deinstallation of atom-1.57.0-0.1.x86_64
Solution 2: keep obsolete lsb-4.0-lp152.4.4.x86_64
Solution 3: break lsb-4.0.fake-lp153.1.1.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 2
Known problem with lsb-fake, use Solution 1 because you want to upgrade to Leap 15.3 so no need for any packages of Leap 15.2
Problem: nothing provides libx265.so.192 needed by libavcodec58-4.2.1-pm153.3.1.i586
Solution 1: Following actions will be done:
keep obsolete libavcodec58-4.2.1-pm152.2.9.3.x86_64
keep obsolete libswresample3-4.2.1-pm152.2.9.3.x86_64
keep obsolete libavutil56-4.2.1-pm152.2.9.3.x86_64
Solution 2: deinstallation of libavcodec58-4.2.1-pm152.2.9.3.x86_64
Solution 3: break libavcodec58-4.2.1-pm153.3.1.i586 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c): 1
Solution 2, its an Leap 15.2 package.
Problem: libQtAV1-1.13.0-bp153.1.28.x86_64 requires libavresample.so.4.0()(64bit), but this requirement cannot be provided
not installable providers: libavresample4_0-4.4-pm153.2.2.x86_64[ftp.gwdg.de-openSUSE_Leap_$releasever]
libavresample4_0-4.4-bp153.1.1.x86_64[repo-oss]
Solution 1: deinstallation of libQtAV1-1.13.0-lp152.2.5.x86_64
Solution 2: keep obsolete libQtAV1-1.13.0-lp152.2.5.x86_64
Solution 3: remove lock to allow removal of libavresample4-4.2.1-pm152.2.9.3.x86_64
Solution 4: break libQtAV1-1.13.0-bp153.1.28.x86_64 by ignoring some of its dependencies
Choose from above solutions by number or skip, retry or cancel [1/2/3/4/s/r/c/d/?] (c): 2
Solution 1 Leap 15.2 package
Problem: libavfilter7-4.2.1-pm152.2.9.3.x86_64 requires libavresample.so.4()(64bit), but this requirement cannot be provided
deleted providers: libavresample4-4.2.1-pm152.2.9.3.x86_64
Solution 1: deinstallation of digikam-6.4.0-lp152.2.14.x86_64
Solution 2: keep obsolete digikam-6.4.0-lp152.2.14.x86_64
Solution 3: remove lock to allow removal of libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 4: break libavfilter7-4.2.1-pm152.2.9.3.x86_64 by ignoring some of its dependencies
Solution 1 Leap 15.2 package
Problem: libavfilter7-4.2.1-pm152.2.9.3.x86_64 requires libavresample.so.4()(64bit), but this requirement cannot be provided
deleted providers: libavresample4-4.2.1-pm152.2.9.3.x86_64
Solution 1: deinstallation of digikam-plugins-6.4.0-lp152.2.14.x86_64
Solution 2: deinstallation of libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 3: keep obsolete digikam-plugins-6.4.0-lp152.2.14.x86_64
Solution 4: break libavfilter7-4.2.1-pm152.2.9.3.x86_64 by ignoring some of its dependencies
Solution 1 Leap 15.2 package
Problem: libavdevice58-4.2.1-pm152.2.9.3.x86_64 requires libavfilter.so.7()(64bit), but this requirement cannot be provided
deleted providers: libavfilter7-4.2.1-pm152.2.9.3.x86_64
Solution 1: deinstallation of showfoto-6.4.0-lp152.2.14.x86_64
Solution 2: keep obsolete showfoto-6.4.0-lp152.2.14.x86_64
Solution 3: remove lock to allow removal of libavdevice58-4.2.1-pm152.2.9.3.x86_64
Solution 4: break libavdevice58-4.2.1-pm152.2.9.3.x86_64 by ignoring some of its dependencies
I went with dvd upgrade. The upgrade dialogue from dvd found unresolved problems requiring manual intervention. Each file problem had only 2 alternatives. First was to “install with vendor change”. Second was to keep installed file. For all files, I checked “install with vendor change”. I think there were about the same 98 problems as zypper found.
Upgrade proceeded installing 5000+ files. Reboot went fine BUT I am now in reduced resolution screen.
Need help to get back to 1920 x 1080. I am still on nvidia proprietary drivers according to yast hardware-info. There is update new version in nvidia repo.
Seek advice to get back to higher resolution. I have mate, kde, and gnome desktops installed if one helps more than another, I can go to that one.
Just a suggestion here. You could implement the following and see if most, if not all of those problems disappear. You can always abort if doesn’t look effective.
Set the repositories used during the “zypper dup” process to equal priority (i.e. 99). I did this yesterday on the second system I have upgraded from 15.2 to 15.3 and it removed all problems with the exception of Firefox related needing vendor change. That one was due to being at version 89, which isn’t ported to 15.3 yet.
My repositories used were Packman, OSS/Non-OSS updates and main, so 5 total.
It wasn’t until I did this that file counts (installed/removed) looked somewhat normal for a distribution upgrade. I believe it was ~2800 upgraded/~700 installed. Those numbers were totally different prior to that change.
Note that once the “zypper dup” completed and I rebooted I did the following. Re-prioritized repositories as follows:
1 Packman
2 Main Updates
3 Backports Updates (this one gets added during dup)
4 SLES Updates (this one gets added during dup)
5 Non-OSS Updates
6 Main (no auto-refresh)
7 Non-OSS (no auto-refresh)
I then ran zypper up, followed by zypper dup. I noticed around 60 downgrades during the dup which seemed strange. However, I just now (June 7) ran a normal “zypper up” and and it showed 117 to be upgraded. So I’m guessing that perhaps stuff is still being ported to Packman. I know this has been the most problematic upgrade I can remember, and I can only attribute that to the SLES integration. Hopefully just growing pains, either OpenSUSE or my own.
