Hi,
I have recently installed opensuse 12.1 in my DELL Inspiron 1564 laptop. My wireless card is from BROADCOM(BCM4312). As per
sticky notes I have installed firmware also. The hardware details are
PCI 400.0: 0282 WLAN controller
[Created at pci.319]
Unique ID: y9sn.reAAs+k0MA5
Parent ID: qTvu.X4o5B4kNFk8
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:04:00.0
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: “Dell Wireless 1397 WLAN Mini-Card”
Vendor: pci 0x14e4 “Broadcom”
Device: pci 0x4315 “BCM4312 802.11b/g”
SubVendor: pci 0x1028 “Dell”
SubDevice: pci 0x000c “Wireless 1397 WLAN Mini-Card”
Revision: 0x01
Driver: “b43-pci-bridge”
Driver Modules: “ssb”
Device File: wlan0
Features: WLAN
Memory Range: 0xf0200000-0xf0203fff (rw,non-prefetchable)
IRQ: 17 (7063 events)
HW Address: c4:17:fe:64:ec:2a
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14)
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: “pci:v000014E4d00004315sv00001028sd0000000Cbc02sc80i00”
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: “modprobe ssb”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #20 (PCI bridge)
But the device is working for only few seconds (that too only after boot-up). after that I can’t able to connect to network.
the “dmesg” list is
8467.259223] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 3/3)
8467.458882] wlan0: direct probe to 14:d6:4d:a2:57:11 timed out
8473.862669] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 1/3)
8474.061679] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 2/3)
8474.261291] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 3/3)
8474.460935] wlan0: direct probe to 14:d6:4d:a2:57:11 timed out
8480.863892] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 1/3)
8481.062824] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 2/3)
8481.262437] wlan0: direct probe to 14:d6:4d:a2:57:11 (try 3/3)
8481.462036] wlan0: direct probe to 14:d6:4d:a2:57:11 timed out
What is the problem and what should I do next to make my wireless work?