wireless in network manager n bluetooth not working in opensuse 12.3 64

hey guys anyone plz help me

first of all i want to say my wireless driver n bluetooth driver were not loaded by default even tried broadcomm available in repos but still nothing worked for me…in ubuntu 12.04 my wireless driver ie broadcom sta wireless properitary driver worked for me,…even my bluetooth driver is not loaded by default which is too weird in open suse 12.3 …n i didnt find any default driver for it in repos…but hardware config list my hardware properly…

NETWORK :Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express)

BLUETOOTH None hci0 Atheros Communications Inc. AR3011 Bluetooth

here are below available drivers for wireless n bluetooth in windows 7 64bit
Dell Wireless 1702 802.11 b/g/n, BT3.0+HS

Wireless WLAN 1502 Half Mini-Card
DELL,SRV,DRVR,NTWK,1704,ENRICO,wifi: 6.20.55.51 BT: 6.5.1.2501,A00

Dell Wireless 1701 Bluetooth v3.0+HS, v.6.3.0.7900, A00

Dell Wireless 1702 802.11 b/g/n, BT3.0+HS, v.9.2.0.225, A01

downloaded ndiswrapper from yast but it was not showing any where…

On 06/05/2013 03:06 PM, nilguy wrote:
> hey guys anyone plz help me

-=WELCOME=- new poster

the open in openSUSE means proprietary drivers/etc are not default
installed…and not provided by openSUSE…

there is another organization (packman) which does provide them to us…

zing up to the top of the wireless forum and read/work though the
three stickies there…one (or more) should get you going, if not
they will tell you exactly what info the helpers here need from you
to help you get going…


dd

Please do not start duplicate threads. Since this one has actual information, let’s stick to this one, I’ll close the other one.

On topic:

The broadcom driver is of no use, since the wireless card is an Atheros, which is supported by the kernel. My guess is that you have been trying things, and now have the networking set to “ifup” in Yast. If so, change the setting to “Networkmanager”.
Please post output of


/sbin/lspci -nnk
lsusb
ip addr

hey guys i m not new to open suse at all used opensuse as my first linux os around 2006 but had a bad experience then i made my hard drive unbootable while booting win xp n opensuse at that time so never ever tried opensuse after that but after using debian/ubuntu/fedora/slackware/mageia around 1n half years just thought to give up a try to this green beast opensuse 12.3 a try…

> hey guys i m not new to open suse at all

so?

were the stickies helpful?

or, at the very least follow the guidance in post #3!


dd
http://tinyurl.com/DD-Caveat

dio@linux-bem0:~> /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Dell Device [1028:0504]
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Dell Device [1028:0504]
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
Subsystem: Dell Device [1028:0504]
Kernel driver in use: r8169
09:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Dell Device [1028:0012]
Kernel driver in use: bcma-pci-bridge
dio@linux-bem0:~> lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0a5c:21bc Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
Bus 001 Device 004: ID 0c45:643d Microdia
Bus 002 Device 003: ID 154b:0054 PNY
dio@linux-bem0:~> ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: p1p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 24:b6:fd:14:d3:01 brd ff:ff:ff:ff:ff:ff
inet 192.167.1.3/24 brd 192.167.1.255 scope global p1p1
inet6 fe80::26b6:fdff:fe14:d301/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether e4:d5:3d:eb:72:4f brd ff:ff:ff:ff:ff:ff
dio@linux-bem0:~>