wireless card Broadcom 802.11a/b/g WLAN does not work

Hi! I have an HP pavilion with OpenSuse 11.4 and the wireless card Broadcom 802.11a/b/g with ssb Kernel driver does not find any wireless networks using Network manager.
with
“sudo /usr/sbin/iwlist scan”
I get:

lo Interface doesn’t support scanning.

eth0 Interface doesn’t support scanning.

wlan0 Interface doesn’t support scanning : Network is down

And with
“hwinfo --wlan” I get
27: PCI 300.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.cphrE8f5q8F
Parent ID: 3hqH.Q0xgpa4wjL6
SysFS ID: /devices/pci0000:00/0000:00:03.0/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: “Hewlett-Packard Company Broadcom 802.11a/b/g WLAN”
Vendor: pci 0x14e4 “Broadcom”
Device: pci 0x4312 “BCM4312 802.11a/b/g”
SubVendor: pci 0x103c “Hewlett-Packard Company”
SubDevice: pci 0x1361 “Broadcom 802.11a/b/g WLAN”
Revision: 0x01
Driver: “b43-pci-bridge”
Driver Modules: “ssb”
Device File: wlan0
Features: WLAN
Memory Range: 0xc4000000-0xc4003fff (rw,non-prefetchable)
IRQ: 19 (no events)
HW Address: 00:1a:73:52:46:bb
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: “pci:v000014E4d00004312sv0000103Csd00001361bc02sc80i00”
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: “modprobe ssb”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)

Please hold off on an answer until moved to the wireless forum.

Thank You,

This post is now open for business in the correct forum.

Thank You,