My sons computer /w 11.4 x64 installed a week ago, was working fine till he wanted to play with Blender.
So he installed it and it would not run because im lazy and did not instruct him on installing NVidia drivers for his vid card. He added the repo and I had him run update instead of just software management (my bad) anyhow ran the update and there were updates with driver install, rebooted Blender works now.
But the nic card sates its not connected in yast no ip in root terminal /w ifconfig info there for nic mac addy and such, tried reboots and reconfig in yast no joy. Dual boot into his windblows and the nic work perfect so not hardware issue.
Need some ideas to try.
Could you post the result of:
/sbin/lspci -nnk
/sbin/lspci -nnk
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913]
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917]
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ohci_hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2)
Subsystem: XFX Pine Group Inc. Device [1682:2372]
Kernel driver in use: nvidia
03:06.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376]
Kernel driver in use: e1000
03:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Kernel driver in use: ohci1394
The nic is listed properly right model.
Yes, this is it
03:06.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05) Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376] Kernel driver in use: e1000
And the driver is shown too
It’s extremely unusual for a wired connection not to work. Even if in the process of your installing software you added a whole bunch of strange and wonderful stuff.
Let me see result from:
zypper lr -d
uname -a
rpm -qa | grep kernel
Incidentally, can you login to your router from this machine?