Недавно установил opensuse 13.2 на ноутбук Lenovo g580. Но появилась одна проблема, а именно невозможность подключения к любой wi-fi сети. Ставил opensuse на Windows 8, в восьмерке всё было в порядке. Сейчас работает только подключение по ethernet. Из команды ifconfig я обнаружил, что нету wlan0( если не ошибаюсь). Есть только enp2s0 и lo . Не знаю, что делать, облазил весь интернет, вводил разные команды, но ничего не работает. Помогите, а то ноутбук без wi-fi - не ноутбук вовсе. В linux’е новичок, прошу поподробнее и попонятнее объяснять, что и как делать.
Не знаю где вы “лазили”, но прежде всего вот сюда](https://ru.opensuse.org/SDB:Broadcom_Bcm43xx).
Ну и не плохо бы узнать, на каком чипе ваша WI-FI карточка.
Antonesko wrote:
> Из
> команды ifconfig я обнаружил, что нету wlan0(
> если не ошибаюсь). Есть только enp2s0 и lo .
А пользователи Windows ™ тоже жалуются:
https://forums.lenovo.com/t5/Серии-B-и-G/Как-включить-Wi-Fi-адаптер-на-G580/td-p/1757153
Приводите вывод команды ‘dmesg’.
P.S. А, вроде, уважаемая фирма. Ктобы мог подумать…
Приводите вывод команды ‘dmesg’.
Давайте уже будем использовать inxi, новички будут меньше пугаться:
inxi -i
А, вроде, уважаемая фирма.
Китайцы - и уважаемая?? Это несовместимые понятия. Погуглите например “Lenovo Superfish” 
joneone wrote:
> > Приводите вывод команды ‘dmesg’.
> Давайте уже будем использовать inxi,
Это только в Packman Extra имеется. Пользуемся тем, что канонами
полагается.
> Китайцы - и уважаемая?? Это
> несовместимые понятия.
- Почему такая дискриминация?
- Ну приведите три устройства, которыми пользуетесь, сделанные не в
Китае.
Это только в Packman Extra имеется.
Давно уже в utilities.
Сделанные в Китае под надзором белых надсмотрщиков с плетками - или просто сделанные в Китае, это абсолютно разные вещи.
dmesg
g
0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Initializing cgroup subsys cpuacct
0.000000] Linux version 3.16.7-7-desktop (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a)
0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-7-desktop root=UUID=c04cc40e-7363-4920-bbd3-e531e58eef64 resume=/dev/sda8 splash=silent quiet showopts
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000006623bfff] usable
0.000000] BIOS-e820: [mem 0x000000006623c000-0x000000006643dfff] reserved
0.000000] BIOS-e820: [mem 0x000000006643e000-0x00000000765cefff] usable
0.000000] BIOS-e820: [mem 0x00000000765cf000-0x0000000079eeefff] reserved
0.000000] BIOS-e820: [mem 0x0000000079eef000-0x0000000079f9efff] ACPI NVS
0.000000] BIOS-e820: [mem 0x0000000079f9f000-0x0000000079ffefff] ACPI data
0.000000] BIOS-e820: [mem 0x0000000079fff000-0x0000000079ffffff] usable
0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007e9fffff] reserved
0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.7 present.
0.000000] DMI: LENOVO 20157/Lenovo G580, BIOS 62CN91WW 10/23/2012
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] AGP: No AGP bridge found
0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-FFFFF write-protect
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
0.000000] 1 base 000000000 mask F80000000 write-back
0.000000] 2 base 07C000000 mask FFC000000 uncachable
0.000000] 3 base 07A000000 mask FFE000000 uncachable
0.000000] 4 base 100000000 mask FFF800000 write-back
0.000000] 5 base 100600000 mask FFFE00000 uncachable
0.000000] 6 disabled
0.000000] 7 disabled
0.000000] 8 disabled
0.000000] 9 disabled
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [mem 0x000f0130-0x000f013f] mapped at [ffff8800000f0130]
0.000000] Scanning 1 areas for low memory corruption
0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
0.000000] [mem 0x00000000-0x000fffff] page 4k
0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
0.000000] [mem 0x100400000-0x1005fffff] page 2M
0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
0.000000] [mem 0x100000000-0x1003fffff] page 2M
0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
0.000000] [mem 0x00100000-0x001fffff] page 4k
0.000000] [mem 0x00200000-0x1fffffff] page 2M
0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
0.000000] [mem 0x20200000-0x3fffffff] page 2M
0.000000] [mem 0x40000000-0x40003fff] page 4k
0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x40005000-0x6623bfff]
0.000000] [mem 0x40005000-0x401fffff] page 4k
0.000000] [mem 0x40200000-0x661fffff] page 2M
0.000000] [mem 0x66200000-0x6623bfff] page 4k
0.000000] init_memory_mapping: [mem 0x6643e000-0x765cefff]
0.000000] [mem 0x6643e000-0x665fffff] page 4k
0.000000] [mem 0x66600000-0x763fffff] page 2M
0.000000] [mem 0x76400000-0x765cefff] page 4k
0.000000] init_memory_mapping: [mem 0x79fff000-0x79ffffff]
0.000000] [mem 0x79fff000-0x79ffffff] page 4k
0.000000] RAMDISK: [mem 0x36ff6000-0x377f2fff]
0.000000] ACPI: Early table checksum verification disabled
0.000000] ACPI: RSDP 0x00000000000F0150 000024 (v02 LENOVO)
0.000000] ACPI: XSDT 0x0000000079FFE148 00009C (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: FACP 0x0000000079FED000 00010C (v05 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: DSDT 0x0000000079FF0000 00A7AB (v02 LENOVO IVB-CPT 00000000 INTL 20061109)
0.000000] ACPI: FACS 0x0000000079F7C000 000040
0.000000] ACPI: SLIC 0x0000000079FFD000 000176 (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: SSDT 0x0000000079FFB000 001068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
0.000000] ACPI: ASF! 0x0000000079FEF000 0000A5 (v32 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: HPET 0x0000000079FEC000 000038 (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: APIC 0x0000000079FEB000 000098 (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: MCFG 0x0000000079FEA000 00003C (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: FPDT 0x0000000079FE9000 000064 (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: SSDT 0x0000000079FE8000 000758 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
0.000000] ACPI: SSDT 0x0000000079FE7000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
0.000000] ACPI: UEFI 0x0000000079FE6000 00003E (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: UEFI 0x0000000079FE5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
0.000000] ACPI: MSDM 0x0000000079FE4000 000055 (v03 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: UEFI 0x0000000079FE3000 000292 (v01 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: DBG2 0x0000000079FE1000 00006B (v00 LENOVO CB-01 00000001 LENO 00000001)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
0.000000] NODE_DATA [mem 0x1005e8000-0x1005fbfff]
0.000000] [ffffea0000000000-ffffea00039fffff] PMD -> [ffff880073e00000-ffff880075bfffff] on node 0
0.000000] Zone ranges:
0.000000] DMA [mem 0x00001000-0x00ffffff]
0.000000] DMA32 [mem 0x01000000-0xffffffff]
0.000000] Normal [mem 0x100000000-0x1005fffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x00001000-0x0009cfff]
0.000000] node 0: [mem 0x00100000-0x1fffffff]
0.000000] node 0: [mem 0x20200000-0x40003fff]
0.000000] node 0: [mem 0x40005000-0x6623bfff]
0.000000] node 0: [mem 0x6643e000-0x765cefff]
0.000000] node 0: [mem 0x79fff000-0x79ffffff]
0.000000] node 0: [mem 0x100000000-0x1005fffff]
0.000000] On node 0 totalpages: 485225
0.000000] DMA zone: 56 pages used for memmap
0.000000] DMA zone: 21 pages reserved
0.000000] DMA zone: 3996 pages, LIFO batch:0
0.000000] DMA32 zone: 6559 pages used for memmap
0.000000] DMA32 zone: 479693 pages, LIFO batch:31
0.000000] Normal zone: 21 pages used for memmap
0.000000] Normal zone: 1536 pages, LIFO batch:0
0.000000] Reserving Intel graphics stolen memory at 0x7aa00000-0x7e9fffff
0.000000] ACPI: PM-Timer IO Port: 0x408
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
0.000000] nr_irqs_gsi: 40
А inxi -i нет такой команды.
0
0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
0.000000] PM: Registered nosave memory: [mem 0x6623c000-0x6643dfff]
0.000000] PM: Registered nosave memory: [mem 0x765cf000-0x79eeefff]
0.000000] PM: Registered nosave memory: [mem 0x79eef000-0x79f9efff]
0.000000] PM: Registered nosave memory: [mem 0x79f9f000-0x79ffefff]
0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7e9fffff]
0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xf7ffffff]
0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
0.000000] e820: [mem 0x7ea00000-0xf7ffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 27 pages/cpu @ffff880100200000 s79104 r8192 d23296 u262144
0.000000] pcpu-alloc: s79104 r8192 d23296 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 478568
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-7-desktop root=UUID=c04cc40e-7363-4920-bbd3-e531e58eef64 resume=/dev/sda8 splash=silent quiet showopts
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
0.000000] AGP: Checking aperture...
0.000000] AGP: No AGP bridge found
0.000000] Memory: 1816152K/1940900K available (6302K kernel code, 1009K rwdata, 4708K rodata, 1560K init, 1532K bss, 124748K reserved)
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
0.000000] Offload RCU callbacks from all CPUs
0.000000] Offload RCU callbacks from CPUs: 0-7.
0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
0.000000] NR_IRQS:33024 nr_irqs:744 16
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] allocated 8912896 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] hpet clockevent registered
0.000000] tsc: Fast TSC calibration using PIT
0.000000] tsc: Detected 1795.919 MHz processor
0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.83 BogoMIPS (lpj=1795919)
0.000047] pid_max: default: 32768 minimum: 301
0.000057] ACPI: Core revision 20140424
0.015423] ACPI: All ACPI Tables successfully acquired
0.015742] Security Framework initialized
0.015757] AppArmor: AppArmor initialized
0.016001] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
0.016701] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
0.017031] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
0.017037] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
0.017305] Initializing cgroup subsys memory
0.017333] Initializing cgroup subsys devices
0.017341] Initializing cgroup subsys freezer
0.017345] Initializing cgroup subsys net_cls
0.017350] Initializing cgroup subsys blkio
0.017354] Initializing cgroup subsys perf_event
0.017357] Initializing cgroup subsys net_prio
0.017364] Initializing cgroup subsys hugetlb
0.017390] CPU: Physical Processor ID: 0
0.017391] CPU: Processor Core ID: 0
0.017397] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
0.017401] mce: CPU supports 7 MCE banks
0.017414] CPU0: Thermal monitoring enabled (TM1)
0.017426] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
0.017566] Freeing SMP alternatives memory: 24K (ffffffff82084000 - ffffffff8208a000)
0.018679] ftrace: allocating 24400 entries in 96 pages
0.032689] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.042690] smpboot: CPU0: Intel(R) Celeron(R) CPU 1000M @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
0.042699] TSC deadline timer enabled
0.042731] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
0.042757] ... version: 3
0.042758] ... bit width: 48
0.042759] ... generic registers: 8
0.042760] ... value mask: 0000ffffffffffff
0.042762] ... max period: 0000ffffffffffff
0.042763] ... fixed-purpose events: 3
0.042764] ... event mask: 00000007000000ff
0.053864] x86: Booting SMP configuration:
0.053867] .... node #0, CPUs: #1
0.064663] CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
0.067179] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.067192] x86: Booted up 1 node, 2 CPUs
0.067194] smpboot: Total of 2 processors activated (7183.67 BogoMIPS)
0.068711] devtmpfs: initialized
0.073418] PM: Registering ACPI NVS region [mem 0x79eef000-0x79f9efff] (720896 bytes)
0.074558] pinctrl core: initialized pinctrl subsystem
0.074608] RTC time: 19:02:47, date: 03/29/15
0.074680] NET: Registered protocol family 16
0.074848] cpuidle: using governor ladder
0.074852] cpuidle: using governor menu
0.074918] ACPI: bus type PCI registered
0.074920] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.075098] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
0.075101] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
0.075199] PCI: Using configuration type 1 for base access
0.075351] mtrr: your CPUs had inconsistent variable MTRR settings
0.075352] mtrr: probably your BIOS does not setup all CPUs.
0.075353] mtrr: corrected configuration.
0.079006] ACPI: Added _OSI(Module Device)
0.079008] ACPI: Added _OSI(Processor Device)
0.079009] ACPI: Added _OSI(3.0 _SCP Extensions)
0.079011] ACPI: Added _OSI(Processor Aggregator Device)
0.082523] ACPI: Executed 1 blocks of module-level executable AML code
0.088676] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
0.089366] ACPI: Dynamic OEM Table Load:
0.089377] ACPI: SSDT 0xFFFF88006F03D000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
)
0.091983] ACPI: Dynamic OEM Table Load:
0.091992] ACPI: SSDT 0xFFFF88006F03A800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
0.094684] ACPI: Dynamic OEM Table Load:
0.094691] ACPI: SSDT 0xFFFF88006F00C200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
0.100540] ACPI: Interpreter enabled
0.100554] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State \_S2_] (20140424/hwxface-580)
0.100572] ACPI: (supports S0 S1 S3 S4 S5)
0.100574] ACPI: Using IOAPIC for interrupt routing
0.100618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.111176] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
0.111184] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
0.111425] \_SB_.PCI0:_OSC invalid UUID
0.111427] _OSC request data:1 1f 0
0.111431] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
0.112874] PCI host bridge to bus 0000:00
0.112878] pci_bus 0000:00: root bus resource [bus 00-3e]
0.112881] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.112883] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.112885] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.112887] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
0.112896] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
0.113020] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
0.113034] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
0.113042] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
0.113048] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
0.113192] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
0.113217] pci 0000:00:14.0: reg 0x10: [mem 0x90500000-0x9050ffff 64bit]
0.113299] pci 0000:00:14.0: PME# supported from D3hot D3cold
0.113364] pci 0000:00:14.0: System wakeup disabled by ACPI
0.113422] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
0.113448] pci 0000:00:16.0: reg 0x10: [mem 0x90515000-0x9051500f 64bit]
0.113533] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
0.113660] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
0.113685] pci 0000:00:1a.0: reg 0x10: [mem 0x90518000-0x905183ff]
0.113786] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
0.113874] pci 0000:00:1a.0: System wakeup disabled by ACPI
0.113933] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
0.113954] pci 0000:00:1b.0: reg 0x10: [mem 0x90510000-0x90513fff 64bit]
0.114041] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
0.114106] pci 0000:00:1b.0: System wakeup disabled by ACPI
0.114160] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
0.114256] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
0.114323] pci 0000:00:1c.0: System wakeup disabled by ACPI
0.114379] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
0.114473] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
0.114539] pci 0000:00:1c.3: System wakeup disabled by ACPI
0.114605] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
0.114634] pci 0000:00:1d.0: reg 0x10: [mem 0x90517000-0x905173ff]
0.114736] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
0.114821] pci 0000:00:1d.0: System wakeup disabled by ACPI
0.114880] pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100
0.115094] pci 0000:00:1f.2: [8086:1e01] type 00 class 0x01018f
0.115113] pci 0000:00:1f.2: reg 0x10: [io 0x30b8-0x30bf]
0.115122] pci 0000:00:1f.2: reg 0x14: [io 0x30cc-0x30cf]
0.115132] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7]
0.115141] pci 0000:00:1f.2: reg 0x1c: [io 0x30c8-0x30cb]
0.115150] pci 0000:00:1f.2: reg 0x20: [io 0x3090-0x309f]
0.115160] pci 0000:00:1f.2: reg 0x24: [io 0x3080-0x308f]
0.115293] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
0.115312] pci 0000:00:1f.3: reg 0x10: [mem 0x90514000-0x905140ff 64bit]
0.115335] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
0.115454] pci 0000:00:1f.5: [8086:1e09] type 00 class 0x010185
0.115473] pci 0000:00:1f.5: reg 0x10: [io 0x30a8-0x30af]
0.115482] pci 0000:00:1f.5: reg 0x14: [io 0x30c4-0x30c7]
0.115492] pci 0000:00:1f.5: reg 0x18: [io 0x30a0-0x30a7]
0.115501] pci 0000:00:1f.5: reg 0x1c: [io 0x30c0-0x30c3]
0.115511] pci 0000:00:1f.5: reg 0x20: [io 0x3070-0x307f]
0.115520] pci 0000:00:1f.5: reg 0x24: [io 0x3060-0x306f]
0.115735] pci 0000:00:1c.0: PCI bridge to [bus 01]
0.115898] pci 0000:02:00.0: [1969:1090] type 00 class 0x020000
0.116015] pci 0000:02:00.0: reg 0x10: [mem 0x90400000-0x9043ffff 64bit]
0.116066] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
0.116594] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.116706] pci 0000:02:00.0: System wakeup disabled by ACPI
0.118694] pci 0000:00:1c.3: PCI bridge to [bus 02]
0.118699] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
0.118704] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
0.119499] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
0.119597] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
0.119698] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
0.119793] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
0.119887] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
0.119981] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
0.120076] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
0.120171] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
0.120399] ACPI: Enabled 2 GPEs in block 00 to 3F
0.120466] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
0.120570] vgaarb: setting as boot device: PCI:0000:00:02.0
0.120573] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
0.120576] vgaarb: loaded
0.120577] vgaarb: bridge control possible 0000:00:02.0
0.120690] SCSI subsystem initialized
0.120748] libata version 3.00 loaded.
0.120757] ACPI: bus type USB registered
0.120783] usbcore: registered new interface driver usbfs
0.120794] usbcore: registered new interface driver hub
0.120826] usbcore: registered new device driver usb
0.120887] PCI: Using ACPI for IRQ routing
0.122663] PCI: pci_cache_line_size set to 64 bytes
0.122727] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
0.122729] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
0.122731] e820: reserve RAM buffer [mem 0x6623c000-0x67ffffff]
0.122732] e820: reserve RAM buffer [mem 0x765cf000-0x77ffffff]
0.122734] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
0.122735] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
0.122879] NetLabel: Initializing
0.122881] NetLabel: domain hash size = 128
0.122882] NetLabel: protocols = UNLABELED CIPSOv4
0.122898] NetLabel: unlabeled traffic allowed by default
0.122940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
0.122946] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
0.124982] Switched to clocksource hpet
0.131531] AppArmor: AppArmor Filesystem Enabled
0.131576] pnp: PnP ACPI init
0.131594] ACPI: bus type PNP registered
0.131783] system 00:00: [io 0x1000-0x100f] has been reserved
0.131786] system 00:00: [io 0xffff] has been reserved
0.131788] system 00:00: [io 0xffff] has been reserved
0.131792] system 00:00: [io 0x0400-0x0453] could not be reserved
0.131794] system 00:00: [io 0x0458-0x047f] has been reserved
0.131796] system 00:00: [io 0x0500-0x057f] has been reserved
0.131800] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
0.131803] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.131850] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
0.131928] system 00:02: [io 0x0454-0x0457] has been reserved
0.131932] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
0.132062] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
0.132101] pnp 00:04: Plug and Play ACPI device, IDs SYN0330 SYN0300 SYN0002 PNP0f13 (active)
0.132332] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
0.132335] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
0.132337] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
0.132339] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
0.132342] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
0.132344] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
0.132346] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
0.132348] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
0.132351] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
0.132353] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
0.132356] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
0.132358] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
0.132699] pnp: PnP ACPI: found 6 devices
0.132700] ACPI: bus type PNP unregistered
0.139840] pci 0000:00:1c.0: PCI bridge to [bus 01]
0.139856] pci 0000:00:1c.3: PCI bridge to [bus 02]
0.139860] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
0.139867] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff]
0.139878] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
0.139880] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
0.139883] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.139885] pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff]
0.139887] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
0.139889] pci_bus 0000:02: resource 1 [mem 0x90400000-0x904fffff]
0.139941] NET: Registered protocol family 2
0.140185] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
0.140236] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
0.140281] TCP: Hash tables configured (established 16384 bind 16384)
0.140300] TCP: reno registered
0.140305] UDP hash table entries: 1024 (order: 3, 32768 bytes)
0.140316] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
0.140392] NET: Registered protocol family 1
0.140412] pci 0000:00:02.0: Video device with shadowed ROM
0.141073] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
0.141082] PCI: CLS 64 bytes, default 64
0.141140] Unpacking initramfs...
1.225280] Freeing initrd memory: 8180K (ffff880036ff6000 - ffff8800377f3000)
1.225293] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
1.225296] software IO TLB [mem 0x6fe00000-0x73e00000] (64MB) mapped at [ffff88006fe00000-ffff880073dfffff]
1.225559] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
1.225611] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
1.225617] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
1.225704] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
1.225736] Scanning for low memory corruption every 60 seconds
1.226138] futex hash table entries: 2048 (order: 5, 131072 bytes)
1.226177] Initialise system trusted keyring
1.226213] audit: initializing netlink subsys (disabled)
1.226232] audit: type=2000 audit(1427655767.216:1): initialized
1.226674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
1.226718] zbud: loaded
1.226936] VFS: Disk quotas dquot_6.5.2
2
1.226954] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
1.227139] msgmni has been set to 3563
1.227185] Key type big_key registered
1.227460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
1.227510] io scheduler noop registered
1.227514] io scheduler deadline registered
1.227554] io scheduler cfq registered (default)
1.228005] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
1.228025] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
1.228077] vesafb: mode is 1366x768x32, linelength=5504, pages=0
1.228078] vesafb: scrolling: redraw
1.228080] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
1.228097] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004400000, using 4160k, total 4160k
1.319191] Console: switching to colour frame buffer device 170x48
1.409953] fb0: VESA VGA frame buffer device
1.409975] intel_idle: MWAIT substates: 0x120
1.409977] intel_idle: v0.4 model 0x3A
1.409978] intel_idle: lapic_timer_reliable_states 0xffffffff
1.410104] GHES: HEST is not enabled!
1.410159] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
1.412293] Non-volatile memory driver v1.3
1.412297] Linux agpgart interface v0.103
1.412438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1.412448] ehci-pci: EHCI PCI platform driver
1.412593] ehci-pci 0000:00:1a.0: EHCI Host Controller
1.412601] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
1.412617] ehci-pci 0000:00:1a.0: debug port 2
1.416510] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
1.416528] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90518000
1.421588] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
1.421636] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.421638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.421640] usb usb1: Product: EHCI Host Controller
1.421642] usb usb1: Manufacturer: Linux 3.16.7-7-desktop ehci_hcd
1.421643] usb usb1: SerialNumber: 0000:00:1a.0
1.421796] hub 1-0:1.0: USB hub found
1.421803] hub 1-0:1.0: 3 ports detected
1.422124] ehci-pci 0000:00:1d.0: EHCI Host Controller
1.422130] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
1.422145] ehci-pci 0000:00:1d.0: debug port 2
1.426061] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
1.426077] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90517000
1.431581] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
1.431635] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
1.431637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.431639] usb usb2: Product: EHCI Host Controller
1.431641] usb usb2: Manufacturer: Linux 3.16.7-7-desktop ehci_hcd
1.431643] usb usb2: SerialNumber: 0000:00:1d.0
1.431796] hub 2-0:1.0: USB hub found
1.431803] hub 2-0:1.0: 3 ports detected
1.431995] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.432002] uhci_hcd: USB Universal Host Controller Interface driver
1.432077] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
1.435414] serio: i8042 KBD port at 0x60,0x64 irq 1
1.435447] serio: i8042 AUX port at 0x60,0x64 irq 12
1.435636] mousedev: PS/2 mouse device common for all mice
1.435802] rtc_cmos 00:01: RTC can wake from S4
1.435970] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
1.436004] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
1.436019] Intel P-state driver initializing.
1.436046] Intel pstate controlling: cpu 0
1.436068] Intel pstate controlling: cpu 1
1.436128] ledtrig-cpu: registered to indicate activity on CPUs
1.436159] hidraw: raw HID events driver (C) Jiri Kosina
1.436359] usbcore: registered new interface driver usbhid
1.436361] usbhid: USB HID core driver
1.436460] TCP: cubic registered
1.436537] NET: Registered protocol family 10
1.437317] Loading compiled-in X.509 certificates
1.437342] registered taskstats version 1
1.437413] AppArmor: AppArmor sha1 policy hashing enabled
1.438021] Magic number: 7:139:42
1.438133] rtc_cmos 00:01: setting system clock to 2015-03-29 19:02:48 UTC (1427655768)
1.438317] PM: Checking hibernation image partition /dev/sda8
1.459399] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
1.723560] usb 1-1: new high-speed USB device number 2 using ehci-pci
1.837848] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
1.837852] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1.838151] hub 1-1:1.0: USB hub found
1.838343] hub 1-1:1.0: 4 ports detected
1.941425] usb 2-1: new high-speed USB device number 2 using ehci-pci
2.056775] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
2.056779] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
2.057085] hub 2-1:1.0: USB hub found
2.057272] hub 2-1:1.0: 4 ports detected
2.131490] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
2.186920] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
2.218594] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6366
2.218597] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
2.218600] usb 1-1.3: Product: Flash Card Reader/Writer
2.218602] usb 1-1.3: Manufacturer: Generic
2.218605] usb 1-1.3: SerialNumber: 058F63666435
2.220991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
2.223682] PM: Hibernation image not present or could not be loaded.
2.225369] Freeing unused kernel memory: 1560K (ffffffff81efe000 - ffffffff82084000)
2.225372] Write protecting the kernel read-only data: 14336k
2.226350] tsc: Refined TSC clocksource calibration: 1795.920 MHz
2.232672] Freeing unused kernel memory: 1880K (ffff88000162a000 - ffff880001800000)
2.237722] Freeing unused kernel memory: 1436K (ffff880001c99000 - ffff880001e00000)
2.239951] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
2.240452] random: systemd urandom read with 8 bits of entropy available
2.331405] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
2.409820] systemd-journald[115]: Failed to set file attributes: Inappropriate ioctl for device
2.425733] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0295
2.425738] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.425741] usb 2-1.4: Product: Lenovo EasyCamera
2.425743] usb 2-1.4: Manufacturer: Vimicro corp.
2.467049] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
2.475663] ACPI: Lid Switch [LID0]
2.477007] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
2.477077] ACPI: Sleep Button [SLPB]
2.477142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
2.477178] ACPI: Power Button [PWRF]
2.486295] [drm] Initialized drm 1.1.0 20060810
2.490844] xhci_hcd 0000:00:14.0: xHCI Host Controller
2.490854] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
2.490955] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
2.490981] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
2.492155] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
2.492159] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.492161] usb usb3: Product: xHCI Host Controller
2.492163] usb usb3: Manufacturer: Linux 3.16.7-7-desktop xhci_hcd
2.492165] usb usb3: SerialNumber: 0000:00:14.0
2.495166] usb-storage 1-1.3:1.0: USB Mass Storage device detected
2.496055] hub 3-0:1.0: USB hub found
2.496069] hub 3-0:1.0: 4 ports detected
2.496617] scsi0 : usb-storage 1-1.3:1.0
2.496728] usbcore: registered new interface driver usb-storage
2.497041] usbcore: registered new interface driver uas
2.497158] keucr: module is from the staging directory, the quality is unknown, you have been warned.
2.497483] usbcore: registered new interface driver eucr
2.498955] xhci_hcd 0000:00:14.0: xHCI Host Controller
2.498962] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
2.499632] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
2.499635] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.499638] usb usb4: Product: xHCI Host Controller
2.499640] usb usb4: Manufacturer: Linux 3.16.7-7-desktop xhci_hcd
2.499641] usb usb4: SerialNumber: 0000:00:14.0
2.500896] hub 4-0:1.0: USB hub found
2.500915] hub 4-0:1.0: 4 ports detected
2.504214] [drm] Memory usable by graphics device = 2048M
2.504218] [drm] Replacing VGA console driver
2.504222] checking generic (80000000 410000) vs hw (80000000 10000000)
2.504386] fb: switching to inteldrmfb from VESA VGA
2.504410] Console: switching to colour dummy device 80x25
2.510277] i915 0000:00:02.0: irq 41 for MSI/MSI-X
2.510292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
2.510294] [drm] Driver supports precise vblank timestamp query.
2.510383] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
2.541855] fbcon: inteldrmfb (fb0) is primary device
2.851187] usb 3-1: new full-speed USB device number 2 using xhci_hcd
2.918405] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
2.918406] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
3.017331] usb 3-1: New USB device found, idVendor=046d, idProduct=c534
3.017333] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3.017335] usb 3-1: Product: USB Receiver
3.017337] usb 3-1: Manufacturer: Logitech
h
3.019252] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C534.0001/input/input6
3.019356] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
3.021684] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input7
3.021859] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
3.226136] Switched to clocksource tsc
3.375554] Console: switching to colour frame buffer device 170x48
3.380238] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
3.380240] i915 0000:00:02.0: registered panic notifier
3.390747] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
3.390894] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
3.391613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
3.391641] ata_piix 0000:00:1f.2: version 2.13
3.391805] ata_piix 0000:00:1f.2: MAP P0 P2 P1 P3 ]
3.498706] scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
3.499181] sd 0:0:0:0: Attached scsi generic sg0 type 0
3.500935] sd 0:0:0:0: [sda] Attached SCSI removable disk
3.542639] scsi1 : ata_piix
3.542793] scsi2 : ata_piix
3.542871] ata1: SATA max UDMA/133 cmd 0x30b8 ctl 0x30cc bmdma 0x3090 irq 19
3.542877] ata2: SATA max UDMA/133 cmd 0x30b0 ctl 0x30c8 bmdma 0x3098 irq 19
3.543048] ata_piix 0000:00:1f.5: MAP P0 -- P1 -- ]
3.694533] scsi3 : ata_piix
3.694686] scsi4 : ata_piix
3.694760] ata3: SATA max UDMA/133 cmd 0x30a8 ctl 0x30c4 bmdma 0x3070 irq 19
3.694764] ata4: SATA max UDMA/133 cmd 0x30a0 ctl 0x30c0 bmdma 0x3078 irq 19
3.716153] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
4.149767] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
4.168892] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B1AS, 8.21, max UDMA/100
4.190872] ata3.00: configured for UDMA/100
4.549595] ata2.00: failed to resume link (SControl 0)
4.701546] ata4: failed to resume link (SControl 30)
4.713358] ata4: SATA link down (SStatus 4 SControl 30)
4.854499] ata1.01: failed to resume link (SControl 0)
5.005515] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
5.005530] ata1.01: SATA link down (SStatus 0 SControl 0)
5.008892] ata1.00: ATA-8: WDC WD5000LPVT-08G33T1, 02.01A02, max UDMA/133
5.008896] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
5.011892] ata1.00: configured for UDMA/133
5.012071] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPVT-0 1A02 PQ: 0 ANSI: 5
5.012443] sd 1:0:0:0: Attached scsi generic sg1 type 0
5.012446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
5.012449] sd 1:0:0:0: [sdb] 4096-byte physical blocks
5.012522] sd 1:0:0:0: [sdb] Write Protect is off
5.012527] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
5.012559] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
5.098845] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10
5.099935] sd 1:0:0:0: [sdb] Attached SCSI disk
5.556274] ata2.01: failed to resume link (SControl 0)
5.568087] ata2.00: SATA link down (SStatus 0 SControl 0)
5.568115] ata2.01: SATA link down (SStatus 0 SControl 0)
5.581944] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B1AS 8.21 PQ: 0 ANSI: 5
5.595671] scsi 3:0:0:0: Attached scsi generic sg2 type 5
5.621867] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
5.621873] cdrom: Uniform CD-ROM driver Revision: 3.20
5.622137] sr 3:0:0:0: Attached scsi CD-ROM sr0
5.854360] random: nonblocking pool is initialized
6.397000] raid6: sse2x1 3933 MB/s
6.413995] raid6: sse2x2 5472 MB/s
6.430986] raid6: sse2x4 7074 MB/s
6.430989] raid6: using algorithm sse2x4 (7074 MB/s)
6.430991] raid6: using ssse3x2 recovery algorithm
6.431222] xor: measuring software checksum speed
6.440974] prefetch64-sse: 10012.000 MB/sec
6.450970] generic_sse: 9200.000 MB/sec
6.450972] xor: using function: prefetch64-sse (10012.000 MB/sec)
6.454820] Btrfs loaded, assert=on
6.613426] BTRFS: device fsid c04cc40e-7363-4920-bbd3-e531e58eef64 devid 1 transid 1240 /dev/sdb9
6.908223] BTRFS info (device sdb9): disk space caching is enabled
8.233031] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
9.648383] device-mapper: uevent: version 1.0.3
9.648460] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
11.554114] BTRFS info (device sdb9): disk space caching is enabled
12.105655] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
12.105664] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
12.106090] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
12.244747] wmi: Mapper loaded
12.481708] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
12.481717] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
12.481722] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
12.481725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
12.481727] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
12.481730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r
12.481731] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
12.481734] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
12.481736] lpc_ich: Resource conflict(s) found affecting gpio_ich
12.490247] thermal LNXTHERM:00: registered as thermal_zone0
12.490251] ACPI: Thermal Zone [TZS0] (41 C)
12.490596] thermal LNXTHERM:01: registered as thermal_zone1
12.490598] ACPI: Thermal Zone [TZS1] (26 C)
12.501192] input: PC Speaker as /devices/platform/pcspkr/input/input9
12.527153] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
12.527160] ACPI: Battery Slot [BAT0] (battery present)
12.622798] iTCO_vendor_support: vendor-support=0
12.648725] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
12.648767] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
12.649067] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
12.739898] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
12.841115] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [3c:97:0e:64:12:38]
12.957144] Linux video capture interface: v2.00
13.031897] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
13.032012] ACPI: AC Adapter [ADP1] (off-line)
13.049553] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
13.050532] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
13.050610] usbcore: registered new interface driver uvcvideo
13.050612] USB Video Class driver (1.1.1)
13.122159] kvm: disabled by bios
13.123632] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input11
13.124926] kvm: disabled by bios
13.457897] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
13.468847] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
13.468852] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
13.468854] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
13.468856] sound hdaudioC0D0: mono: mono_out=0x0
13.468858] sound hdaudioC0D0: inputs:
13.468860] sound hdaudioC0D0: Internal Mic=0x19
13.468862] sound hdaudioC0D0: Mic=0x18
13.474491] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input12
13.474682] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
13.474761] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
17.070649] Adding 2098172k swap on /dev/sdb8. Priority:-1 extents:1 across:2098172k FS
17.073029] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
17.170041] XFS (sdb10): Mounting V5 Filesystem
17.802780] XFS (sdb10): Ending clean mount
18.502585] audit: type=1305 audit(1427623385.569:2): audit_pid=633 old=0 auid=4294967295 ses=4294967295 res=1
20.051196] ip6_tables: (C) 2000-2006 Netfilter Core Team
20.061976] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
20.068136] ip_tables: (C) 2000-2006 Netfilter Core Team
40.977015] cfg80211: Calling CRDA to update world regulatory domain
40.982978] cfg80211: World regulatory domain updated:
40.982982] cfg80211: DFS Master region: unset
40.982984] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
40.982986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
40.983005] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
40.983010] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
40.983012] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
40.983014] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
40.983016] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
40.983017] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
40.983019] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
41.091772] alx 0000:02:00.0: irq 44 for MSI/MSI-X
41.093299] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
41.094248] alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
41.094850] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
41.516577] NET: Registered protocol family 17
42.690383] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
42.698645] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
42.941217] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
43.191771] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
43.392479] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=400 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=360
54.247655] Bluetooth: Core ver 2.19
54.247683] NET: Registered protocol family 31
54.247685] Bluetooth: HCI device and connection manager initialized
54.247695] Bluetooth: HCI socket layer initialized
54.247699] Bluetooth: L2CAP socket layer initialized
54.247716] Bluetooth: SCO socket layer initialized
54.256652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
54.256657] Bluetooth: BNEP filters: protocol multicast
54.256668] Bluetooth: BNEP socket layer initialized
65.749569] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
71.085626] fuse init (API version 7.23)
79.310943] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC=3c:97:0e:64:12:38:90:2b:34:33:86:1f:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=282 TOS=0x00 PREC=0x00 TTL=128 ID=11787 PROTO=UDP SPT=1900 DPT=1900 LEN=262
80.309168] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC=3c:97:0e:64:12:38:90:2b:34:33:86:1f:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=282 TOS=0x00 PREC=0x00 TTL=128 ID=11788 PROTO=UDP SPT=1900 DPT=1900 LEN=262
81.746309] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC=3c:97:0e:64:12:38:90:2b:34:33:86:1f:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=282 TOS=0x00 PREC=0x00 TTL=128 ID=11789 PROTO=UDP SPT=1900 DPT=1900 LEN=262
113.766337] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
177.804924] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
199.271988] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC=3c:97:0e:64:12:38:90:2b:34:33:86:1f:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=282 TOS=0x00 PREC=0x00 TTL=128 ID=11790 PROTO=UDP SPT=1900 DPT=1900 LEN=262
200.271379] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC=3c:97:0e:64:12:38:90:2b:34:33:86:1f:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=282 TOS=0x00 PREC=0x00 TTL=128 ID=11791 PROTO=UDP SPT=1900 DPT=1900 LEN=262
201.270366] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC=3c:97:0e:64:12:38:90:2b:34:33:86:1f:08:00 SRC=192.168.0.104 DST=192.168.0.105 LEN=282 TOS=0x00 PREC=0x00 TTL=128 ID=11792 PROTO=UDP SPT=1900 DPT=1900 LEN=262
305.787471] SFW2-INext-DROP-DEFLT IN=enp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:3e97:0eff:fe64:1238 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
Antonesko, ты что творишь?? 
http://paste.opensuse.org/ !
*Lazy_Kent, вот видите, к чему например приводит просьба выложить dmesg?)) *
Что злой такой сегодня?
> Сделанные в Китае под надзором белых
> надсмотрщиков с плетками - или просто
> сделанные в Китае, это абсолютно разные
> вещи.
Из этой фразы яне могу сделать ни одного вывода.
Данный Lenovo куда отнести?
Antonesko wrote:
> dmesg
>
> Code:
Ну не так буквально. Есть же сервисы для цитирования текстовых файлов.
http://susepaste.org/ приветствуется.
joneone wrote:
> -Lazy_Kent, вот видите, к чему например
> приводит просьба выложить dmesg?)) -
Да уж попенял.
Ну вот:
12.841115] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [3c:97:0e:64:12:38]
- не broadcom ни разу, это уже хуже (вот вам и хваленая ленова). Дальше пусть говорят те, кто в теме.
joneone wrote:
> Code:
> --------------------
> 12.841115] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [3c:97:0e:64:12:38]
> --------------------
> - не broadcom ни разу, это уже хуже (вот вам и
> хваленая ленова). Дальше пусть говорят
> те, кто в теме.
Любой Atheros пойдёт"на ура". Там что-то другое. Покане читал.
Но ссылка на виндовых пользователей остаётся актуальной.
Попробовал совет от Windows’a, и wi-fi заработал.Спасибо всем за помощь.