hi
i create ftp server on suse enterprise and i’ve join my domain, but i’ve a problem with vsftpd when i try to connect with filezila
i’ve this message 500 OOPS: cannot change directory:/home/cola/toto
i want to connect at server ftp with my logs windows AD not user local
i’ve tests so much soluce for this error but change nothing.
for exemple : command setenforce 0 or getenforce or setbool etc… command-not-found setenforce
and i can authenticate me only with port 22 on FileZila
SUSE Linux Enterprise Server 11 SP2 (x86_64)
vsftpd: version 2.0.7
my config :
General Settings
Uncomment this to enable any form of FTP write command.
write_enable=YES
Activate directory messages - messages given to remote users when they
go into a certain directory.
#dirmessage_enable=YES
It is recommended that you define on your system a unique user which the
ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
You may activate the “-R” option to the builtin ls. This is disabled by
default to avoid remote users being able to cause excessive I/O on large
sites. However, some broken FTP clients such as “ncftp” and “mirror” assume
the presence of the “-R” option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
You may specify a file of disallowed anonymous e-mail addresses. Apparently
useful for combatting certain DoS attacks.
#deny_email_enable=YES
(default follows)
#banned_email_file=/etc/vsftpd.banned_emails
If enabled, all user and group information in
directory listings will be displayed as “ftp”.
hide_ids=YES
Default umask for local users is 077. You may wish to change this to 022,
if your users expect that (022 is used by most other ftpd’s)
local_umask=022
You may specify an explicit list of local users to chroot() to their home
directory. If chroot_local_user is YES, then this list becomes a list of
users to NOT chroot().
chroot_list_enable=NO
(default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
The maximum data transfer rate permitted, in bytes per second, for
local authenticated users. The default is 0 (unlimited).
local_max_rate=7168
Anonymous users will only be allowed to download files which are
world readable.
#anon_world_readable_only=YES
Uncomment this to allow the anonymous FTP user to upload files. This only
has an effect if the above global write enable is activated. Also, you will
obviously need to create a directory writable by the FTP user.
anon_upload_enable=NO
Default umask for anonymus users is 077. You may wish to change this to 022,
if your users expect that (022 is used by most other ftpd’s)
#anon_umask=022
Uncomment this if you want the anonymous FTP user to be able to create
new directories.
anon_mkdir_write_enable=NO
Uncomment this to enable anonymus FTP users to perform other write operations
like deletion and renaming.
#anon_other_write_enable=YES
If you want, you can arrange for uploaded anonymous files to be owned by
a different user. Note! Using “root” for uploaded files is not
recommended!
#chown_uploads=YES
#chown_username=whoever
The maximum data transfer rate permitted, in bytes per second, for anonymous
authenticated users. The default is 0 (unlimited).
#anon_max_rate=7168
Log Settings
Log to the syslog daemon instead of using an logfile.
#syslog_enable=YES
Activate logging of uploads/downloads.
xferlog_enable=YES
You may override where the log file goes if you like. The default is shown
below.
#vsftpd_log_file=/var/log/vsftpd.log
If you want, you can have your log file in standard ftpd xferlog format.
Note: This disables the normal logging unless you enable dual_log_enable below.
#xferlog_std_format=NO
You may override where the log file goes if you like. The default is shown
below.
xferlog_file=/var/log/xferlog
Enable this to have booth logfiles. Standard xferlog and vsftpd’s own style log.
#dual_log_enable=YES
Uncomment this to enable session status information in the system process listing.
#setproctitle_enable=YES
Transfer Settings
Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
You may change the default value for timing out a data connection.
data_connection_timeout=120
Enable this and the server will recognise asynchronous ABOR requests. Not
recommended for security (the code is non-trivial). Not enabling it,
however, may confuse older FTP clients.
async_abor_enable=NO
By default the server will pretend to allow ASCII mode but in fact ignore
the request. Turn on the below options to have the server actually do ASCII
mangling on files when in ASCII mode.
Beware that turning on ascii_download_enable enables malicious remote parties
to consume your I/O resources, by issuing the command “SIZE /big/file” in
ASCII mode.
These ASCII options are split into upload and download because you may wish
to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
on the client anyway…
ascii_upload_enable=NO
ascii_download_enable=NO
PAM setting. Do NOT change this unless you know what you do!
pam_service_name=vsftpd
Set listen=YES if you want vsftpd to run standalone
listen=YES
Set to ssl_enable=YES if you want to enable SSL
ssl_enable=NO
Limit passive ports to this range to assis firewalling
pasv_min_port=30000
pasv_max_port=30100
anon_mkdir_write_enable=NO
anon_root=/home
anon_upload_enable=NO
chroot_local_user=YES
ftpd_banner=Welcome message
idle_session_timeout=900
local_enable=YES
log_ftp_protocol=YES
max_clients=15
max_per_ip=3
pasv_enable=YES
ssl_sslv2=NO
ssl_sslv3=NO
ssl_tlsv1=NO
write_enable=YES
local_root=/home/cola
anonymous_enable=NO
On windows
C:\Users oto>ftp 10.xx.xx.xx
Connecté à 10.xx.xx.xx.
220 Welcome message
Utilisateur (10.xx.xx.xxhttps://lqo-thequestionsnetw.netdna-ssl.com/questions/images/smilies/frown.gifnone)) : cola oto
331 Please specify the password.
Mot de passe :
500 OOPS: cannot change directory:/home/cola/toto
500 OOPS: child died
Connexion fermée par l’hôte distant.
tell me if my config its ok or not any criticism is good
help me pls ^^