I recently installed OpenSuse 10.3 64 bit on an HP Pavilion laptop. It does not recogize a USB stick when i plug it in. I don’t see it in My Computer (KDE). I’ve tried searching for opensuse usb stick but hits i get are about installing/running the OS from a usb stick.
How can I get it to work?
> mount -l
/dev/sda1 on / type ext3 (rw,acl,user_xattr) ]
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr) ]
securityfs on /sys/kernel/security type securityfs (rw)
On 2008-06-15, allelopath <allelopath@no-mx.forums.opensuse.org> wrote:
>
> I recently installed OpenSuse 10.3 64 bit on an HP Pavilion laptop. It
> does not recogize a USB stick when i plug it in. I don’t see it in My
> Computer (KDE). I’ve tried searching for opensuse usb stick but hits i
> get are about installing/running the OS from a usb stick.
> How can I get it to work?
First check if it’s recognised on the USB interface.
Use /usr/sbin/lsusb, before and after plugging the stick in.
–
The sand remembers once there was beach and sunshine
but chip is warm too
– haiku from Effector Online, Volume 1, Number 6
I’ve moved to 11.0, but same problem.b43-fwcutter -w
The device is not recognized, lsusb is the same before and after plug in.
/usr/sbin/lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Jun 20 14:46:23 linux-yy30 kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jun 20 14:46:23 linux-yy30 kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Jun 20 14:46:26 linux-yy30 kernel: hub 2-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jun 20 14:46:35 linux-yy30 syslog-ng[1697]: last message repeated 3 times
Jun 20 14:46:35 linux-yy30 kernel: hub 2-0:1.0: unable to enumerate USB device on port 5
Jun 20 14:46:35 linux-yy30 kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jun 20 14:46:35 linux-yy30 kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Jun 20 14:46:38 linux-yy30 kernel: hub 2-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
Jun 20 14:46:47 linux-yy30 syslog-ng[1697]: last message repeated 3 times
Jun 20 14:46:47 linux-yy30 kernel: hub 2-0:1.0: unable to enumerate USB device on port 7
On 2008-06-20, allelopath <allelopath@no-mx.forums.opensuse.org> wrote:
>
> I’ve moved to 11.0, but same problem.b43-fwcutter -w
> The device is not recognized, lsusb is the same before and after plug
> in.
>
> # /usr/sbin/lsusb
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 002: ID 046d:c518 Logitech, Inc. MX610 Laser Cordless
> Mouse
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Well, it looks like you might have a hardare problem.
Have you tried changing ports? Maybe even change from using on on the front,
to one on the back (usually different HUB’s) ?
–
The sand remembers once there was beach and sunshine
but chip is warm too
– haiku from Effector Online, Volume 1, Number 6