Hi,
i’m using OpenSuse 11.0 on a Dell Inspiron 6400.
History/Problem description:
As i wanted to configure sax2 in order to use 2 monitors (as one big screen, xinerama mode - which didn’t work - but thats a different and currently less important problem), i played with the configuration for a while in order to get that xinerama mode working. But then after a reboot of the X11-Server i noticed that my usb mouse didn’t work any more - just my mousepad did its job like before.
Anyone an idea how to get my usb mouse working again ?
I restarted several times now, so thats probably not going to change anything :).
Some output that might help you:
lsusb:
Bus 005 Device 002: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
hwinfo --mouse :
30: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0
Unique ID: KRJj.Jezymlx7L2A
Parent ID: uIhY.gkSaZmjGyhD
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
SysFS BusID: 3-1:1.0
Hardware Class: mouse
Model: “Logitech USB Optical Mouse”
Hotplug: USB
Vendor: usb 0x046d “Logitech, Inc.”
Device: usb 0xc019 “USB Optical Mouse”
Revision: “43.01”
Compatible to: int 0x0210 0x0028
Driver: “usbhid”
Driver Modules: “usbhid”
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: “usb:v046DpC019d4301dc00dsc00dp00ic03isc01ip02”
Driver Info #0:
Buttons: 8
Wheels: 2
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #34 (Hub)
38: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input
Unique ID: AH6Q.aaw02jN0uv2
Hardware Class: mouse
Model: “SynPS/2 Synaptics TouchPad”
Vendor: 0x0002
Device: 0x0007 “SynPS/2 Synaptics TouchPad”
Compatible to: int 0x0210 0x0003
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Thanks in advance,
aza