hi all new to the forums and to SUSE so U may see me active a lot,
i am trying to install my
Tritton See2 Xtreme Usb To Dvi Or Vga External Video Card (Tri Uv200)there is no driver support from the manufacture please can some one give me a idiots guide to get my secondary monitor running please
Kind Regards
Paul
I don’t like your chances at all regarding Linux support for such a device, but anyway you should start by reporting the chipset
lsusb
or even better if you do
usb-devices
and when the device is plugged in what is reported by
dmesg|tail
Sorry for the super long code this is what all three commands did
D22009@linux-m2a6:~> lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0711:0950 Magic Control Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
Bus 004 Device 002: ID 040b:2013 Weltrend Semiconductor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
D22009@linux-m2a6:~> usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.7
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0711 ProdID=0950 Rev=01.10
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=222mA
I: If#= 0 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=00 Prot=00 Driver=sisusb
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1a.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=040b ProdID=2013 Rev=02.00
S: Product=2.4HGzkeyboard and mouse
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=15d9 ProdID=0a4c Rev=01.00
S: Product= USB OPTICAL MOUSE
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1a.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.16
S: Manufacturer=Linux 3.16.6-2-desktop uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
D22009@linux-m2a6:~> dmesg|tail
73.876452] Bluetooth: BNEP filters: protocol multicast
73.876460] Bluetooth: BNEP socket layer initialized
74.756509] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
78.758867] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
86.765674] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
102.770509] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
134.802075] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
198.828899] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
241.507263] fuse init (API version 7.23)
326.899279] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:021e:0bff:fe64:952d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
http://i924.photobucket.com/albums/ad83/paulsdraggons/IMG_0268_zpsefbef29e.jpg
this is what the screen is doing so its getting somthing
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0711 ProdID=0950 Rev=01.10
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=222mA
I: If#= 0 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=00 Prot=00 Driver=sisusb
The device is associated with the sisusb graphics driver.
This is encouraging too
http://patentpondering.blogspot.co.nz/2011/02/triton-see2-xtreme-uv200-in-linux.html
When you have the device plugged in, not what is reported by
xrandr --verbose
It might be just that some manual configuration is necessary. (No promises from me though.)
VGA1 connected primary 1280x1024+0+0 (0x8d) normal (normal left inverted right x axis y axis) 337mm x 270mm
Identifier: 0x42
Timestamp: 47985
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff004293a50601010101
2210010308221b96ea6e06a1544c9926
194f54bfef0081800101010101010101
010101010101302a009851002a403070
1300510e1100001ec31e002041002030
10601300510e11000000000000fd003c
4b1e500e000a202020202020000000ff
004e355543303638303031353133007b
1280x1024 (0x45) 108.000MHz +HSync +VSync +preferred
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x1024 (0x8d) 135.000MHz +HSync +VSync *current
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1024x768 (0x8e) 78.800MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.06KHz
v: height 768 start 769 end 772 total 800 clock 75.08Hz
1024x768 (0x8f) 78.750MHz -HSync -VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x90) 75.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.48KHz
v: height 768 start 771 end 777 total 806 clock 70.07Hz
1024x768 (0x91) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
832x624 (0x92) 57.284MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.73KHz
v: height 624 start 625 end 628 total 667 clock 74.55Hz
800x600 (0x93) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0x94) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x95) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x96) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
640x480 (0x97) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x98) 31.500MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.86KHz
v: height 480 start 489 end 491 total 520 clock 72.81Hz
640x480 (0x99) 30.240MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.00KHz
v: height 480 start 483 end 486 total 525 clock 66.67Hz
640x480 (0x9a) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
720x400 (0x9b) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08Hz
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x43
Timestamp: 47985
Subpixel: no subpixels
Clones:
CRTCs: 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
This is the Output the command gave me is this the usb graphics car ?
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x43
Timestamp: 47985
Subpixel: no subpixels
Clones:
CRTCs: 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
if so how do i program it ?
No, that just relates to the virtual screen set up by Xorg. The usb device does not appear to be active.
Let’s see if it recognised via
xrandr --listproviders
xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x44 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:Intel
This is what came up with the command
Well, it’s not reported there, and I don’t have any experience with these devices, beyond what little I’ve read. So, I can’t offer any more help, except to suggest reading the blog that I linked to, and maybe a bit of googling.
For example