USB Devices that work and don't work --help!

SuSE12.2 fresh 32 bit install. USB installed devices that work are: Samsung CLP-360 printer, Logitech Wireless Keyboard/Mouse, and Memory sticks work when plugged in. Webcams (3 different modles), USB scanner, and Hauppague PVR 250 dont’t work but are recognized in dmesg. This all works on another partition with SuSE 11.4. Cheese crashes when run, so does VLC when selecting video device, motv loads but no webcam display, Skype has no video from webcam but voice works. I’m at a dead end resolving this problem, plus I’m not the “sharpest knife in the drawer” when it comes to resolving problems in Linux.
Thanks in advance for any ideas!

What is your video card and have you installed the drivers for it?

On Tue, 22 Jan 2013 18:26:01 +0000, rklipp wrote:

> Webcams (3 different modles), USB scanner,
> and Hauppague PVR 250 dont’t work but are recognized in dmesg. This all
> works on another partition with SuSE 11.4. Cheese crashes when run, so
> does VLC when selecting video device, motv loads but no webcam display,
> Skype has no video from webcam but voice works. I’m at a dead end
> resolving this problem, plus I’m not the “sharpest knife in the drawer”
> when it comes to resolving problems in Linux.
> Thanks in advance for any ideas!

It would be useful if you posted the relevant sections from the dmesg
output and from lsusb (with the devices plugged in). That would help
narrow things down a bit.

Jim


Jim Henderson
openSUSE Forums Administrator
Forum Use Terms & Conditions at http://tinyurl.com/openSUSE-T-C

Video card is ATI Radeon HD4250 GPU installed by SuSE 12.2 install

lsusb:

klipp@linux-cqs8:~> lsusb
Bus 001 Device 002: ID 04e8:331a Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 058f:6364 Alcor Micro Corp.
Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 004 Device 003: ID 0458:201f KYE Systems Corp. (Mouse Systems) ColorPage-Vivid 1200 XE
Bus 004 Device 004: ID 093a:2468 Pixart Imaging, Inc. SoC PC-Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
klipp@linux-cqs8:~>

dmesg:

1.477672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.477674] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.477676] usb usb1: Product: EHCI Host Controller
1.477677] usb usb1: Manufacturer: Linux 3.4.11-2.16-desktop ehci_hcd
1.477678] usb usb1: SerialNumber: 0000:00:12.2
1.477759] hub 1-0:1.0: USB hub found
1.477761] hub 1-0:1.0: 5 ports detected
1.477863] ehci_hcd 0000:00:13.2: EHCI Host Controller
1.477868] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
1.477873] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
1.477889] ehci_hcd 0000:00:13.2: debug port 1
1.477898] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe6ff400
1.483651] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
1.483664] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
1.483665] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.483667] usb usb2: Product: EHCI Host Controller
1.483668] usb usb2: Manufacturer: Linux 3.4.11-2.16-desktop ehci_hcd
1.483669] usb usb2: SerialNumber: 0000:00:13.2
1.483737] hub 2-0:1.0: USB hub found
1.483739] hub 2-0:1.0: 5 ports detected
1.483851] ehci_hcd 0000:00:16.2: EHCI Host Controller
1.483857] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
1.483862] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
1.483877] ehci_hcd 0000:00:16.2: debug port 1
1.483886] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe6ff000
1.489628] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
1.489641] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
1.489642] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.489644] usb usb3: Product: EHCI Host Controller
1.489645] usb usb3: Manufacturer: Linux 3.4.11-2.16-desktop ehci_hcd
1.489646] usb usb3: SerialNumber: 0000:00:16.2
1.489707] hub 3-0:1.0: USB hub found
1.489710] hub 3-0:1.0: 4 ports detected
1.489778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.489833] ohci_hcd 0000:00:12.0: OHCI Host Controller
1.489839] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
1.489857] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe6fe000
1.544495] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
1.544497] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.544498] usb usb4: Product: OHCI Host Controller
1.544499] usb usb4: Manufacturer: Linux 3.4.11-2.16-desktop ohci_hcd
1.544501] usb usb4: SerialNumber: 0000:00:12.0
1.544578] hub 4-0:1.0: USB hub found
1.544582] hub 4-0:1.0: 5 ports detected
1.544693] ohci_hcd 0000:00:13.0: OHCI Host Controller
1.544698] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
1.544709] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fd000
1.599340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
1.599342] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.599343] usb usb5: Product: OHCI Host Controller
1.599344] usb usb5: Manufacturer: Linux 3.4.11-2.16-desktop ohci_hcd
1.599346] usb usb5: SerialNumber: 0000:00:13.0
1.599422] hub 5-0:1.0: USB hub found
1.599426] hub 5-0:1.0: 5 ports detected
1.599538] ohci_hcd 0000:00:14.5: OHCI Host Controller
1.599543] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
1.599555] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe6fc000
1.654184] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
1.654187] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.654188] usb usb6: Product: OHCI Host Controller
1.654189] usb usb6: Manufacturer: Linux 3.4.11-2.16-desktop ohci_hcd
1.654190] usb usb6: SerialNumber: 0000:00:14.5
1.654269] hub 6-0:1.0: USB hub found
1.654273] hub 6-0:1.0: 2 ports detected
1.654384] ohci_hcd 0000:00:16.0: OHCI Host Controller
1.654389] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
1.654400] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe6f7000
1.709028] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
1.709030] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.709032] usb usb7: Product: OHCI Host Controller
1.709033] usb usb7: Manufacturer: Linux 3.4.11-2.16-desktop ohci_hcd
1.709034] usb usb7: SerialNumber: 0000:00:16.0
1.709110] hub 7-0:1.0: USB hub found
1.709114] hub 7-0:1.0: 4 ports detected
1.709175] uhci_hcd: USB Universal Host Controller Interface driver
1.709918] usbcore: registered new interface driver usbhid
1.709919] usbhid: USB HID core driver

s 0 SControl 300)
1.778828] usb 1-2: new high-speed USB device number 2 using ehci_hcd
1.894342] usb 1-2: New USB device found, idVendor=04e8, idProduct=331a
1.894344] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1.894346] usb 1-2: Product: CLP-360 Series
1.894347] usb 1-2: Manufacturer: Samsung Electronics Co., Ltd.
1.894348] usb 1-2: SerialNumber: Z8A3BJBC6000N7N
00 ctl 0xc080 bmdma 0xc008 irq 17
2.250498] usb 2-2: new high-speed USB device number 2 using ehci_hcd
2.367054] usb 2-2: New USB device found, idVendor=058f, idProduct=6364
2.367056] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
2.367058] usb 2-2: Product: Mass Storage Device
2.367059] usb 2-2: Manufacturer: Generic
2.367060] usb 2-2: SerialNumber: 058F63646476
2.368358] generic-usb 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:13.2-2/input1
2.550382] rdac: device handler registered
2.551388] emc: device handler registered
2.552383] hp_sw: device handler registered
2.553380] alua: device handler registered
2.556821] udevd[161]: starting version 182
2.563582] ACPI: processor limited to max C-state 1
2.571827] [drm] Initialized drm 1.1.0 20060810
2.573632] xhci_hcd 0000:03:00.0: xHCI Host Controller
2.573644] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
2.573755] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfeafe000
2.573793] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
2.573797] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
2.573801] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
2.573804] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
2.573808] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
2.573877] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
2.573879] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.573881] usb usb8: Product: xHCI Host Controller
2.573882] usb usb8: Manufacturer: Linux 3.4.11-2.16-desktop xhci_hcd
2.573883] usb usb8: SerialNumber: 0000:03:00.0
2.574085] xHCI xhci_add_endpoint called for root hub
2.574086] xHCI xhci_check_bandwidth called for root hub
2.574109] hub 8-0:1.0: USB hub found
2.574114] hub 8-0:1.0: 2 ports detected
2.574167] xhci_hcd 0000:03:00.0: xHCI Host Controller
2.574171] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
2.574769] [drm] radeon defaulting to kernel modesetting.
2.574771] [drm] radeon kernel modesetting enabled.
2.577110] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
2.577111] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.577113] usb usb9: Product: xHCI Host Controller
2.577114] usb usb9: Manufacturer: Linux 3.4.11-2.16-desktop xhci_hcd
2.577115] usb usb9: SerialNumber: 0000:03:00.0
2.577176] xHCI xhci_add_endpoint called for root hub
2.577177] xHCI xhci_check_bandwidth called for root hub
2.577192] hub 9-0:1.0: USB hub found
2.577199] hub 9-0:1.0: 2 ports detected
2.577640] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
2.577642] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
2.577654] Console: switching to colour dummy device 80x25
0 on minor 0
2.745173] usb 4-3: New USB device found, idVendor=046d, idProduct=c517
2.745175] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.745177] usb 4-3: Product: USB Receiver
2.745178] usb 4-3: Manufacturer: Logitech
2.752285] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input0
2.752354] logitech 0003:046D:C517.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
2.760101] logitech 0003:046D:C517.0003: fixing up Logitech keyboard report descriptor
2.760444] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input1
2.760561] logitech 0003:046D:C517.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
2.986398] usb 4-4: new full-speed USB device number 3 using ohci_hcd
3.133058] usb 4-4: New USB device found, idVendor=0458, idProduct=201f
3.133060] usb 4-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
3.133062] usb 4-4: Product: 1200DPI USB Scanner
3.361374] usb 4-5: new full-speed USB device number 4 using ohci_hcd
3.511001] usb 4-5: New USB device found, idVendor=093a, idProduct=2468
3.511003] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3.511005] usb 4-5: Product: CIF Single Chip
3.511006] usb 4-5: Manufacturer: Pixart Imaging Inc.
GUID 001e8c00003386ed, S400
14.736550] ivtv: Start initialization, version 1.4.3
14.737733] ivtv0: Initializing card 0
14.737741] ivtv0: Autodetected Hauppauge card (cx23416 based)
14.795828] tveeprom 5-0050: Hauppauge model 32032, rev B110, serial# 6942123
14.795830] tveeprom 5-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
14.795832] tveeprom 5-0050: TV standards NTSC(M) (eeprom 0x08)
14.795834] tveeprom 5-0050: audio processor is MSP4448 (idx 27)
14.795835] tveeprom 5-0050: decoder processor is SAA7115 (idx 19)
14.795837] tveeprom 5-0050: has no radio, has IR receiver, has no IR transmitter
14.795838] ivtv0: Autodetected Hauppauge WinTV PVR-250
14.806957] cfg80211: Calling CRDA to update world regulatory domain
14.810930] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
14.995481] saa7115 5-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
15.157725] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x331A
15.157781] usbcore: registered new interface driver usblp
15.493188] i2c-core: driver [msp3400] using legacy suspend method
15.493196] i2c-core: driver [msp3400] using legacy resume method
15.500616] gspca_main: v2.14.0 registered
15.502890] gspca_main: pac207-2.14.0 probing 093a:2468
15.504850] msp3400 5-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
15.504853] msp3400 5-0040: msp3400 supports radio, mode is autodetect and autoselect
15.509478] input: pac207 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/input/input5
15.509551] usbcore: registered new interface driver pac207
15.516896] i2c-core: driver [tuner] using legacy suspend method
15.516898] i2c-core: driver [tuner] using legacy resume method
15.522652] tuner 5-0061: Tuner -1 found with type(s) Radio TV.
15.581411] tuner-simple 5-0061: creating new instance
15.581421] tuner-simple 5-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
15.583328] ivtv0: Registered device video1 for encoder MPG (4096 kB)
15.583405] ivtv0: Registered device video33 for encoder YUV (2048 kB)
15.583474] ivtv0: Registered device vbi1 for encoder VBI (1024 kB)
15.583547] ivtv0: Registered device video25 for encoder PCM (320 kB)
15.583553] ivtv0: Initialized card: Hauppauge WinTV PVR-250
15.583595] ivtv: End initialization
15.583731] 8139cp 0000:04:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
15.786708] Initializing USB Mass Storage driver…
15.786996] scsi8 : usb-storage 2-2:1.0
15.787249] usbcore: registered new interface driver usb-storage
15.787254] USB Mass Storage support registered.
15.865762] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’

klipp@linux-cqs8:~>
klipp@linux-cqs8:~> lsusb
Bus 001 Device 002: ID 04e8:331a Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 058f:6364 Alcor Micro Corp.
Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 004 Device 003: ID 0458:201f KYE Systems Corp. (Mouse Systems) ColorPage-Vivid 1200 XE
Bus 004 Device 004: ID 093a:2468 Pixart Imaging, Inc. SoC PC-Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
klipp@linux-cqs8:~>
klipp@linux-cqs8:~>
klipp@linux-cqs8:~>
klipp@linux-cqs8:~>
klipp@linux-cqs8:~> lsusb
Bus 001 Device 002: ID 04e8:331a Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 058f:6364 Alcor Micro Corp.
Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 004 Device 003: ID 0458:201f KYE Systems Corp. (Mouse Systems) ColorPage-Vivid 1200 XE
Bus 004 Device 004: ID 093a:2468 Pixart Imaging, Inc. SoC PC-Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
klipp@linux-cqs8:~>

Many people in these forums get put off if you post logs in the manner you have done.
Consider using

 tags for small logs. Look for # in post editor toolbar
In case of long messages use paste.opensuse.org and cross reference the paste link here.

Sorry about that, I reduced the size of the requested information more than 50%. I have no idea how to accomplish what you described but I will figure out how to do it so that this won’t be a problem when I post in the future.

For short logs you can use code tags. Refer the below link
Using code tags properly

For longer logs :- You can also use the webpage SUSE Paste to paste the logs there. Choose appropriate expiry time . You can then cross reference the paste link in these forums.