Ich habe mein System Online von 11.2 auf 11.3 upgegraded. Soweit läuft mittlerweile alles wieder. Nur der hald lässt sich im Moment nicht starten. Folgende Ausgabe gibt es auf der Konsole beim Start mit –daemon=no:
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
Run started hal-system-power-pm-is-supported (20000) (0)
! full path is '/usr/lib/hal/hal-system-power-pm-is-supported', program_dir is '/usr/lib/hal'
pid 14885: rc=0 signaled=0: /usr/lib/hal/hal-system-power-pm-is-supported
Run started hald-addon-input (0) (0)
! full path is '/usr/lib/hal/hald-addon-input', program_dir is '/usr/lib/hal'
Run started hald-probe-storage (20000) (0)
! full path is '/usr/lib/hal/hald-probe-storage', program_dir is '/usr/lib/hal'
woohoo
Run started hald-probe-storage (20000) (0)
! full path is '/usr/lib/hal/hald-probe-storage', program_dir is '/usr/lib/hal'
Run started hald-probe-storage (20000) (0)
! full path is '/usr/lib/hal/hald-probe-storage', program_dir is '/usr/lib/hal'
woohoo
Run started hald-probe-pc-floppy (20000) (0)
! full path is '/usr/lib/hal/hald-probe-pc-floppy', program_dir is '/usr/lib/hal'
woohoo
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
pid 14923: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
pid 14924: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
pid 14925: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
pid 14926: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
pid 14927: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
Run started hald-probe-serial (20000) (0)
! full path is '/usr/lib/hal/hald-probe-serial', program_dir is '/usr/lib/hal'
pid 14928: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
pid 14929: rc=1 signaled=0: /usr/lib/hal/hald-probe-serial
pid 14930: rc=0 signaled=0: /usr/lib/hal/hald-probe-serial
pid 14922: rc=0 signaled=0: /usr/lib/hal/hald-probe-pc-floppy
**hald: symbol lookup error: hald: undefined symbol: g_malloc_n**
pid 14918: rc=0 signaled=0: /usr/lib/hal/hald-addon-input
libhal.c 4510 : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
libhal.c 4510 : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
libhal.c 4510 : Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
pid 14919: rc=0 signaled=0: /usr/lib/hal/hald-probe-storage
pid 14920: rc=2 signaled=0: /usr/lib/hal/hald-probe-storage
pid 14921: rc=0 signaled=0: /usr/lib/hal/hald-probe-storage
Kern des Problems ist wohl die Fett markierte Zeile. Mit –verbose=yes gibt es leider (für mich) keine näheren Informationen zum Fehler. Trotzdem hier ein Ausschnitt:
15:28:34.921 [D] hotplug.c:496: event held back: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:1/1:0:1:0/block/sdb/sdb8
15:28:34.921 [D] hotplug.c:500: events queued = 12, events in progress = 12
15:28:34.921 * osspec.c:496: Synthesizing powermgmt events...
15:28:34.921 [E] acpi.c:762: Couldn't open /proc/acpi/battery: Error opening directory '/proc/acpi/battery': No such file or directory
15:28:34.921 * acpi.c:733: Processing /proc/acpi/processor/CPU1
15:28:34.921 * acpi.c:733: Processing /proc/acpi/processor/CPU0
15:28:34.921 [E] acpi.c:762: Couldn't open /proc/acpi/ac_adapter: Error opening directory '/proc/acpi/ac_adapter': No such file or directory
15:28:34.921 [E] acpi.c:762: Couldn't open /proc/acpi/button/lid: Error opening directory '/proc/acpi/button/lid': No such file or directory
15:28:34.921 * acpi.c:733: Processing /proc/acpi/button/power/PWRF
15:28:34.921 * acpi.c:733: Processing /proc/acpi/button/power/PWRB
15:28:34.921 [E] acpi.c:762: Couldn't open /proc/acpi/button/sleep: Error opening directory '/proc/acpi/button/sleep': No such file or directory
15:28:34.921 * acpi.c:841: Processing sonypi display
15:28:34.921 * osspec.c:498: ACPI capabilities found
15:28:34.921 * osspec.c:506: Done synthesizing events
hald: symbol lookup error: hald: undefined symbol: g_malloc_n
[14981]: 15:28:34.923 [D] addon-input.c:499: An error occured, exiting cleanly
pid 14981: rc=0 signaled=0: /usr/lib/hal/hald-addon-input
Hat jemand einen Tipp, wo ich weiter suchen soll?********