Upgrade 15.1 --> 15.2.1 A) can't update packages.... B) What is up with neuveau?

MarkNeido · March 6, 2021, 8:20pm

Good afternoon,
Yesterday I upgraded 15.1 to 15.2.1 It seemed to go well (I am logged into 15.2.1) but there are a ton of updates (38) that need to be installed (not a surprise) but I can’t make it happen. Here are my repos:


#  | Alias                     | Name                               | Enabled | GPG Check | Refresh
---+---------------------------+------------------------------------+---------+-----------+--------
 1 | openSUSE-Leap-15.2-1      | openSUSE-Leap-15.2-1               | Yes     | (r ) Yes  | Yes
 2 | repo-debug                | Debug Repository                   | Yes     | (r ) Yes  | Yes
 3 | repo-debug-non-oss        | Debug Repository (Non-OSS)         | No      | ----      | ----
 4 | repo-debug-update         | Update Repository (Debug)          | No      | ----      | ----
 5 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | No      | ----      | ----
 6 | repo-non-oss              | Non-OSS Repository                 | Yes     | (r ) Yes  | Yes
 7 | repo-oss                  | Main Repository                    | Yes     | (r ) Yes  | Yes
 8 | repo-source               | Source Repository                  | No      | ----      | ----
 9 | repo-source-non-oss       | Source Repository (Non-OSS)        | No      | ----      | ----
10 | repo-update               | Main Update Repository             | Yes     | (r ) Yes  | Yes
11 | repo-update-non-oss       | Update Repository (Non-Oss)        | Yes     | (r ) Yes  | Yes

I haven’t run into this before (been with OpenSuse since v11 days). Any suggestion?

Also, why did the mesa video “stuff” go away? Couple of applications that I used and liked: “k3b” and “dolphin” no longer work, and if I were to try to make them work, I get warnings that I am about to do terrible damage to my system.

Thanks,
Mark

Sauerland · March 6, 2021, 8:49pm

Please show:

zypper lr -d

This shows also the URL.

Also show:

zypper dup --allow-vendor-change

zypper se -si | grep -Ei 'systemp|system_p|system-p|system p'

MarkNeido · March 7, 2021, 12:40am

#  | Alias                     | Name                               | Enabled | GPG Check | Refresh
---+---------------------------+------------------------------------+---------+-----------+--------
 1 | openSUSE-Leap-15.2-1      | openSUSE-Leap-15.2-1               | Yes     | (r ) Yes  | Yes
 2 | repo-debug                | Debug Repository                   | Yes     | (r ) Yes  | Yes
 3 | repo-debug-non-oss        | Debug Repository (Non-OSS)         | No      | ----      | ----
 4 | repo-debug-update         | Update Repository (Debug)          | No      | ----      | ----
 5 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | No      | ----      | ----
 6 | repo-non-oss              | Non-OSS Repository                 | Yes     | (r ) Yes  | Yes
 7 | repo-oss                  | Main Repository                    | Yes     | (r ) Yes  | Yes
 8 | repo-source               | Source Repository                  | No      | ----      | ----
 9 | repo-source-non-oss       | Source Repository (Non-OSS)        | No      | ----      | ----
10 | repo-update               | Main Update Repository             | Yes     | (r ) Yes  | Yes
11 | repo-update-non-oss       | Update Repository (Non-Oss)        | Yes     | (r ) Yes  | Yes

MarkNeido · March 7, 2021, 12:41am

zypper dup --allow-vendor-change
Loading repository data…
Reading installed packages…
Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See ‘man zypper’ for more information about this command.
Computing distribution upgrade…
2 Problems:
Problem: Mesa-dri-nouveau-18.3.2-lp151.23.11.1.x86_64 requires Mesa = 18.3.2, but this requirement cannot be provided
Problem: Mesa-18.3.2-lp151.23.11.1.x86_64 requires Mesa-dri = 18.3.2, but this requirement cannot be provided

Problem: Mesa-dri-nouveau-18.3.2-lp151.23.11.1.x86_64 requires Mesa = 18.3.2, but this requirement cannot be provided
deleted providers: Mesa-18.3.2-lp151.23.11.1.x86_64
Solution 1: Following actions will be done:
keep obsolete Mesa-18.3.2-lp151.23.11.1.x86_64
keep obsolete Mesa-gallium-18.3.2-lp151.23.11.1.x86_64
keep obsolete Mesa-libEGL1-18.3.2-lp151.23.11.1.x86_64
keep obsolete Mesa-libGL1-18.3.2-lp151.23.11.1.x86_64
Solution 2: remove lock to allow removal of Mesa-dri-nouveau-18.3.2-lp151.23.11.1.x86_64
Solution 3: break Mesa-dri-nouveau-18.3.2-lp151.23.11.1.x86_64 by ignoring some of its dependencies

Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c/d/?] (c):

nrickert · March 7, 2021, 12:59am

If you have locked Mesa-dri-nouveau, then that lock is the problem. You could try removing the lock before you start the upgrade.

gogalthorp · March 7, 2021, 1:04am

Please use zypper lr -d
the - d to show the actual URL

MarkNeido · March 7, 2021, 2:29am

MarkNeido · March 7, 2021, 2:32am

This is part 2

MarkNeido · March 7, 2021, 2:37am

MarkNeido · March 7, 2021, 2:38am

MarkNeido · March 7, 2021, 2:43am

MarkNeido · March 7, 2021, 2:53am

This redo is as you requested:
mark:~ # zypper lr -d

| Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service

—±--------------------------±-----------------------------------±--------±----------±--------±---------±-------±-------------------------------------------------------------------------±-------
1 | openSUSE-Leap-15.2-1 | openSUSE-Leap-15.2-1 | Yes | (r ) Yes | Yes | 99 | rpm-md | cd:/?devices=/dev/disk/by-id/ata-ATAPI_iHAS124_B_3524215_3E8112503929 |
2 | repo-debug | Debug Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/debug/distribution/leap/15.2/repo/oss/ |
3 | repo-debug-non-oss | Debug Repository (Non-OSS) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distribution/leap/15.2/repo/non-oss/ |
4 | repo-debug-update | Update Repository (Debug) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/leap/15.2/oss/ |
5 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/leap/15.2/non-oss/ |
6 | repo-non-oss | Non-OSS Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/leap/15.2/repo/non-oss/ |
7 | repo-oss | Main Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/leap/15.2/repo/oss/ |
8 | repo-source | Source Repository | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribution/leap/15.2/repo/oss/ |
9 | repo-source-non-oss | Source Repository (Non-OSS) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribution/leap/15.2/repo/non-oss/ |
10 | repo-update | Main Update Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.2/oss |
11 | repo-update-non-oss | Update Repository (Non-Oss) | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.2/non-oss/ |
mark:~ #

MarkNeido · March 7, 2021, 2:57am

Carrying on:

MarkNeido · March 7, 2021, 2:58am

MarkNeido · March 7, 2021, 3:00am

…sorry, I send a couple of duplicates in these libraries. I’m going back to where I left off the first time. I hope this isn’t too much of a pain.

MarkNeido · March 7, 2021, 3:11am

MarkNeido · March 7, 2021, 3:12am

MarkNeido · March 7, 2021, 3:13am

MarkNeido · March 7, 2021, 3:14am

MarkNeido · March 7, 2021, 3:16am

LAST PART