Hi all;
I’m trying to configure my TVCard.
Using Yast I set this values:
Card Number= 107 (Enore NLTV-FM)
Tuner Number=42 (TVFM)
But after reinstart pc the card don’t get any image in KDETV and KRadio don’t have any signal.
My configuration:
Card:
mura@linux-ui2k:~> dmesg |grep saa
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7134 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
saa7130[0]: found at 0000:00:0b.0, rev: 1, irq: 19, latency: 64, mmio: 0xfebfac00
saa7130[0]: subsystem: 1a7f:2008, board: Encore ENLTV-FM [card=107,insmod option]
Modules linked in: saa7134(+) snd_intel8x0 ir_common snd_ac97_codec videodev v4l1_compat ac97_bus compat_ioctl32 v4l2_common snd_pcm snd_timer videobuf_dma_sg videobuf_core nvidia(PX) snd tveeprom soundcore sis_agp shpchp rtc_cmos sr_mod sis900 i2c_core agpgart button pcspkr snd_page_alloc rtc_core pci_hotplug cdrom mii rtc_lib floppy sg usbhid hid ff_memless ehci_hcd sata_sis ohci_hcd sd_mod crc_t10dif usbcore edd pata_sis libata scsi_mod dock ext3 mbcache jbd fan thermal processor thermal_sys hwmon
<f97d5ebe>] saa7134_initdev+0x449/0x843 [saa7134]
saa7130[0]: board init: gpio is 57000
input: saa7134 IR (Encore ENLTV-FM) as /devices/pci0000:00/0000:00:0b.0/input/input5
saa7130[0]: i2c eeprom 00: 7f 1a 08 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7130[0]: i2c eeprom 10: 00 df 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 20: 01 40 01 02 02 ff 01 03 08 ff 00 8f ff ff ff ff
saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 40: ff 87 00 c2 96 10 03 32 15 08 ff ff ff ff ff ff
saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff 41 84 ff 31 30 4d 4f 4f 4e
saa7130[0]: i2c eeprom 60: 53 50 44 41 31 30 30 ff 41 ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner’ 0-0060: chip found @ 0xc0 (saa7130[0])
tuner’ 0-0061: chip found @ 0xc2 (saa7130[0])
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
saa7130[0]: registered device radio0
saa7146: register extension ‘dvb’.
mura@linux-ui2k:~> dmesg |grep tuner
tuner’ 0-0060: chip found @ 0xc0 (saa7130[0])
tuner’ 0-0061: chip found @ 0xc2 (saa7130[0])
tuner-simple 0-0060: creating new instance
tuner-simple 0-0060: type set to 42 (Philips FCV1236D ATSC/NTSC dual in)
Kernel:
mura@linux-ui2k:~> uname -a
Linux linux-ui2k 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100 i686 i686 i386 GNU/Linux
My /dev:
radio
radio0
video
video0
v4l
vbi
Can you help me ?
Tks,
Mura