TPlink WN422G usb wifi

Hi all!
I have read lots of topics but i cant find solution for this problem.
Does anyone know how can i use my TP-link wn422g usb wifi key?
(v2, atheros chipset)
I hope there is solution!
TY

Boadica -Dicas-Instalando o adaptador Wireless TL-WN422G USB no openSUSE
Its might help, but i dont understand it :S

UP! (10 characters)

I’m IN

modinfo **ath9k_htc **
filename:       /lib/modules/2.6.31.14-0.4-desktop/updates/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
**firmware:       ar9271.fw
firmware:       ar7010_1_1.fw
firmware:       ar7010.fw**
description:    Atheros driver 802.11n HTC based wireless devices
license:        Dual BSD/GPL
author:         Atheros Communications
srcversion:     55079D0B30E9CB2343CE8EA
alias:          usb:v083ApA704d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v04CAp4605d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3328d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13D3p3327d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07D1p3A10d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0846p9018d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0846p9030d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p7015d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p7010d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v**0CF3**p**1006**d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CF3p9271d*dc*dsc*dp*ic*isc*ip*
depends:        mac80211,ath9k_hw,compat_firmware_class,ath9k_common,ath,cfg80211
vermagic:       2.6.31.14-0.4-desktop SMP preempt mod_unload modversions 
parm:           debug:Debugging mask (uint)
parm:           nohwcrypt:Disable hardware encryption (int)

and OUT again, good luck.

Hi!

I dont understand the following errors, maybe u can help me…

modinfo ath9k_htc

ERROR: modinfo: could not find module ath9k_htc

./scripts/driver-select ath9k_htc

Backing up makefile: Makefile.bk
Old build found, going to clean this up first...
/home/mityok/compat-wireless-2010-11-06/config.mk:196: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m."
Restoring Makefiles...

and million of that message…

make && make install

/home/mityok/compat-wireless-2010-11-06/config.mk:196: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m."
./scripts/gen-compat-autoconf.sh config.mk > include/linux/compat_autoconf.h
make -C /lib/modules/2.6.34.7-0.5-default/build M=/home/mityok/compat-wireless-2010-11-06 modules
make: *** /lib/modules/2.6.34.7-0.5-default/build: Nincs ilyen fájl vagy könyvtár.  Stop.
make: *** [modules] Error 2

I have installed OpenSUSE 11.2, and i could do this installation fully, but only once. Later i have upgraded it to 11.3, and i get the errors…
I hope u know what is that…

On 12/07/2010 01:06 PM, mity89 wrote:
>
> Hi!
>
>
> I dont understand the following errors, maybe u can help me…
>
> modinfo ath9k_htc
>
> Code:
> --------------------
> ERROR: modinfo: could not find module ath9k_htc
> --------------------
>
>
> ./scripts/driver-select ath9k_htc
>
> Code:
> --------------------
> Backing up makefile: Makefile.bk
> Old build found, going to clean this up first…
> /home/mityok/compat-wireless-2010-11-06/config.mk:196: “WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.”
> Restoring Makefiles…
> --------------------
>
>
> and million of that message…
>
> make && make install
>
> Code:
> --------------------
> /home/mityok/compat-wireless-2010-11-06/config.mk:196: “WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.”
> ./scripts/gen-compat-autoconf.sh config.mk > include/linux/compat_autoconf.h
> make -C /lib/modules/2.6.34.7-0.5-default/build M=/home/mityok/compat-wireless-2010-11-06 modules
> make: *** /lib/modules/2.6.34.7-0.5-default/build: Nincs ilyen fájl vagy könyvtár. Stop.
> make: *** [modules] Error 2
> --------------------
>
>
> I have installed OpenSUSE 11.2, and i could do this installation fully,
> but only once. Later i have upgraded it to 11.3, and i get the errors…
> I hope u know what is that…

What errors? All you have posted are WARNINGS and tell you that some things will
not work. You missed an earlier message.

If you want compat-wireless, get it from Packman.

Ok, i will try it tomorrow (i have to get cabels for having internet on suse)

Btw, do u have Suse and same wifi device?

I cant find anything like compat-wireless…

On 12/08/2010 12:06 PM, mity89 wrote:
>
> I cant find anything like compat-wireless…

Add the repo at
http://download.opensuse.org/repositories/driver:/wireless/openSUSE_11.3/

Hm

/lib/modules/**2.6.34.7-0.5**-default

Updated kernel, so using the driver:wireless-repo with drivers built against the updated kernel from 11.3 (called 11.3-update) would be the better choice.

Hi
I have added the repo, but no results finded in yast2 installer.

I have added this repo, found the compat-wireless, installed it, restarted the system, but nothing happened…

On 12/10/2010 11:36 AM, mity89 wrote:
>
> I have added this repo, found the compat-wireless, installed it,
> restarted the system, but nothing happened…

OK, you told us it was an Atheros device, but never posted the output of lsusb.
Do so now.

If you get a “command not found” when you enter the command, you will need to
install the usb-utilities package.

Hi
lsusb:

Bus 001 Device 003: ID 0cf3:1006 Atheros Communications, Inc.

On 12/23/2010 03:06 PM, mity89 wrote:
>
> lwfinger;2264426 Wrote:
>>
>> OK, you told us it was an Atheros device, but never posted the output
>> of lsusb.
>> Do so now.
>>
>> If you get a “command not found” when you enter the command, you will
>> need to
>> install the usb-utilities package.
>
>
> Hi
> lsusb:
>
> Code:
> --------------------
> Bus 001 Device 003: ID 0cf3:1006 Atheros Communications, Inc.
> --------------------

Is the driver loaded? Your device should be supported. Does ‘lsmod | grep ath’
return anything?

mityok@linux-c9tx:~> lsmod | grep ath
ath9k_htc              42087  0 
mac80211              252289  1 ath9k_htc
ath9k_common            4734  1 ath9k_htc
ath9k_hw              302294  2 ath9k_htc,ath9k_common
ath                     8403  2 ath9k_htc,ath9k_hw
cfg80211              154567  3 ath9k_htc,mac80211,ath
usbcore               191575  5 ath9k_htc,usbhid,ohci_hcd,ehci_hcd
mityok@linux-c9tx:~> 

When i plugged in, i got a lot of messages from Kupdater applet:
http://dl.dropbox.com/u/12413952/wifiusb1.png
than:
http://dl.dropbox.com/u/12413952/wifiusb.png