Touchpad Medion Akoya E5218 funktioniert nach Neuinstallation nicht.

Nach der Neuinstallation von Leap 42.3 auf meinem Medion-Rechner funktioniert das Touchpad nicht mehr.

Zeige einmal:

zypper se -si synaptics input

S | Name | Type | Version | Arch | Repository
—±---------------------------±------------±------------±-------±----------------------
i+ | Input Method Panel | application | | noarch | (System Packages)
i+ | gsynaptics | package | 0.9.16-31.2 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | gsynaptics-lang | package | 0.9.16-31.2 | noarch | openSUSE-Leap-42.3-Oss
i+ | libinput-udev | package | 1.5.0-3.5 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | libinput-udev | package | 1.5.0-3.5 | x86_64 | openSUSE-Leap-42.3-0
i+ | libinput10 | package | 1.5.0-3.5 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | libinput10 | package | 1.5.0-3.5 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-evdev | package | 2.10.3-3.4 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-evdev | package | 2.10.3-3.4 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-joystick | package | 1.6.2-15.1 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-joystick | package | 1.6.2-15.1 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-keyboard | package | 1.8.1-9.1 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-keyboard | package | 1.8.1-9.1 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-libinput | package | 0.25.1-1.1 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-libinput | package | 0.25.1-1.1 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-mouse | package | 1.9.1-9.1 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-mouse | package | 1.9.1-9.1 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-synaptics | package | 1.8.3-4.4 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-synaptics | package | 1.8.3-4.4 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-synaptics-devel | package | 1.8.3-4.4 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-vmmouse | package | 13.1.0-11.4 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-vmmouse | package | 13.1.0-11.4 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-void | package | 1.4.1-8.4 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-void | package | 1.4.1-8.4 | x86_64 | openSUSE-Leap-42.3-0
i+ | xf86-input-wacom | package | 0.32.0-4.5 | x86_64 | openSUSE-Leap-42.3-Oss
i+ | xf86-input-wacom | package | 0.32.0-4.5 | x86_64 | openSUSE-Leap-42.3-0
i+ | xorg-x11-driver-input | package | 7.6_1-17.1 | noarch | openSUSE-Leap-42.3-Oss
i+ | xorg-x11-driver-input | package | 7.6_1-17.1 | noarch | openSUSE-Leap-42.3-0

Das ist die Ausgabe nach dem von Ihnen angegebenen Befehl. Dieses Problem bestand schon einmal. Da musste eine Datei geändert werden, und alles funktionierte. Leider weiß ich nicht mehr in welcher Datei diese Anpassungen vorgenommen wurden.

https://forum.ubuntuusers.de/topic/medion-akoya-e5218-touchpad-wird-nicht-erkannt/

i8042.nomux=1

Den Parameter kannst du in Yast—System----Bootloader-----Kernel Parameter----optionaler Parameter für die Kernel-Befehlszeile eintragen.