Touchpad and Bluetooth Mouse

English Hardware
1

Hey guys - first time I’ve ever posted here and first time Linux user, so bear with me please.

Its about time I put my tail between my legs - I tried doing this on my own but I’m not smart enough to. I’ve read through the forums about problems similar to mine, tried the ideas give, but nothing remedies my problems.

The first problem is that my touchpad is either unresponsive, or gets way over reactive - randomly darting across the screen clicking things it shouldn’t. I tried disabling the touchpad feature, but to no avail. Same problem just like before. It also doesn’t help not knowing the shortcut keys or any linux lingo, it took me awhile to find how to disable the touchpad. So my first question is this: how do I fix my touchpad and make it functional, if not fully functional? (besides booting in failsafe mode, but still, its nowhere close to perfect there).

The second problem is with my bluetooth mouse. openSUSE kinda notices it, but doesn’t let it do anything. In failsafe mode, i was able to detect it, but it couldn’t connect to it without giving me some error. Invaild something, I don’t remember. Is there a way I can fix this problem and get my mouse to work? Its a Dell Bluetooth mouse, if that matters.

I really want to use Linux, specifically openSUSE - I’ve heard so many good things about it. I’m very new at linux, so if you explain something, could you do so in detail?

Thanks for everything.

2

You neglected to give us a clue as to your hardware stats.
Open a terminal and go su, then use the following

lspci

hwinfo

paste results here

3

linux:/home/linux # lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GT (rev a1)
03:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
03:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)

4

adcom_Corp_4503-event-mouse, /dev/input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-event-mouse, /dev/input/by-id/usb-Broadcom_Corp_4503-mouse, /dev/input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-mouse
Device Number: char 13:63 (char 13:34)
Speed: 12 Mbps
Module Alias: “usb:v0A5Cp4503d0100dc00dsc00dp00ic03isc01ip02”
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #65 (Hub)

60: USB 00.0: 10800 Keyboard
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_a5c_4502_noserial_if0_logicaldev_input
Unique ID: bVWh.S18zd8p68R7
Parent ID: 2jVo.SAMIiYMCz2F
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0
SysFS BusID: 7-2.2:1.0
Hardware Class: keyboard
Model: “Broadcom Keyboard”
Hotplug: USB
Vendor: usb 0x0a5c “Broadcom Corp.”
Device: usb 0x4502
Revision: “1.00”
Driver: “usbhid”
Driver Modules: “usbhid”
Device File: /dev/input/event4
Device Files: /dev/input/event4, /dev/input/by-id/usb-Broadcom_Corp_4502-event-kbd, /dev/input/by-path/pci-0000:00:1d.2-usb-0:2.2:1.0-event-kbd
Device Number: char 13:68
Speed: 12 Mbps
Module Alias: “usb:v0A5Cp4502d0100dc00dsc00dp00ic03isc01ip01”
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #65 (Hub)

61: USB 00.3: 11500 Bluetooth Device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_413c_8126_noserial_if3
Unique ID: Wvej.uvbnOCg6r+F
Parent ID: 2jVo.SAMIiYMCz2F
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.3
SysFS BusID: 7-2.1:1.3
Hardware Class: bluetooth
Model: “Dell BCM2045”
Hotplug: USB
Vendor: usb 0x413c “Dell Computer Corp.”
Device: usb 0x8126 “BCM2045”
Revision: “3.67”
Speed: 12 Mbps
Module Alias: “usb:v413Cp8126d0367dcE0dsc01dp01icFEisc01ip00”
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: “modprobe btusb”
Driver Info #1:
Driver Status: hci_usb is active
Driver Activation Cmd: “modprobe hci_usb”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #65 (Hub)

65: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_a5c_4500_noserial_if0
Unique ID: 2jVo.SAMIiYMCz2F
Parent ID: BSFT.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0
SysFS BusID: 7-2:1.0
Hardware Class: hub
Model: “Broadcom BCM2045B2”
Hotplug: USB
Vendor: usb 0x0a5c “Broadcom Corp.”
Device: usb 0x4500 “BCM2045B2”
Revision: “1.00”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v0A5Cp4500d0100dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #71 (Hub)

66: USB 00.0: 11600 Fingerprint Reader
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_483_2016_noserial_if0
Unique ID: mZxt.2ZOIHS5Eja7
Parent ID: uIhY.MxUuepIFPaE
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0
SysFS BusID: 3-2:1.0
Model: “SGS Thomson Microelectronics Fingerprint Reader”
Hotplug: USB
Vendor: usb 0x0483 “SGS Thomson Microelectronics”
Device: usb 0x2016 “Fingerprint Reader”
Revision: “0.01”
Speed: 12 Mbps
Module Alias: “usb:v0483p2016d0001dc00dsc00dp00icFFisc00ip00”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #77 (Hub)

68: USB 00.2: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_413c_5115_2RDCTD1_if2
Unique ID: bpOY.rLa1M9l7ia7
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.2
SysFS BusID: 2-2:1.2
Hardware Class: unknown
Model: “Dell Photo AIO Printer 926”
Hotplug: USB
Vendor: usb 0x413c “Dell Computer Corp.”
Device: usb 0x5115 “Dell Photo AIO Printer 926”
Revision: “0.01”
Serial ID: “2RDCTD1”
Driver: “usbhid”
Driver Modules: “usbhid”
Speed: 480 Mbps
Module Alias: “usb:v413Cp5115d0001dc00dsc00dp00ic03isc00ip00”
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: “modprobe usbhid”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #78 (Hub)

69: USB 00.1: 10900 Printer
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_413c_5115_2RDCTD1_if1_printer_noserial
Unique ID: 8e8U.74W8J1KkPLE
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.1
SysFS BusID: 2-2:1.1
Hardware Class: printer
Model: “Dell Photo AIO Printer 926”
Hotplug: USB
Vendor: usb 0x413c “Dell Computer Corp.”
Device: usb 0x5115 “Dell Photo AIO Printer 926”
SubVendor: “Dell”
SubDevice: " Photo AIO Printer 926"
Revision: “0.01”
Serial ID: “2RDCTD1”
Driver: “usblp”
Driver Modules: “usblp”
Device File: /dev/usb/lp0
Device Files: /dev/usb/lp0, /dev/usblp0, /dev/par0
Device Number: char 180:0
Speed: 480 Mbps
Module Alias: “usb:v413Cp5115d0001dc00dsc00dp00ic07isc01ip02”
Driver Info #0:
Driver Status: usblp is active
Driver Activation Cmd: “modprobe usblp”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #78 (Hub)

71: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
Unique ID: BSFT.RTX9xWW_uz4
Parent ID: mvRC.Dbk1Q7iF9p2
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default uhci_hcd UHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default uhci_hcd”
Device: usb 0x0001 “UHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1d.2”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (USB Controller)

72: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
Unique ID: 7eqy.gkSaZmjGyhD
Parent ID: vayM.iAoHxYaYdQ2
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default uhci_hcd UHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default uhci_hcd”
Device: usb 0x0001 “UHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1d.1”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #26 (USB Controller)

73: USB 00.1: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_5a9_2640_noserial_if1
Unique ID: dOTr.o6FPNxSLOw4
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.1
SysFS BusID: 1-1:1.1
Hardware Class: unknown
Model: “OmniVision Laptop Integrated Webcam”
Hotplug: USB
Vendor: usb 0x05a9 “OmniVision Technologies, Inc.”
Device: usb 0x2640 “Laptop Integrated Webcam”
Revision: “1.00”
Speed: 480 Mbps
Module Alias: “usb:v05A9p2640d0100dcEFdsc02dp01ic0Eisc02ip00”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #79 (Hub)

75: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
Unique ID: 2XnU.v+N+B0xY+P6
Parent ID: 1GTX.BmrXS_Sr522
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default uhci_hcd UHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default uhci_hcd”
Device: usb 0x0001 “UHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1d.0”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #27 (USB Controller)

5

76: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0
Unique ID: zPk0.7gZT0a5zLs5
Parent ID: gFpy.mqZHsq2Nky3
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default uhci_hcd UHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default uhci_hcd”
Device: usb 0x0001 “UHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1a.1”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #33 (USB Controller)

77: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0
Unique ID: uIhY.MxUuepIFPaE
Parent ID: pwJ7.FQdXNGxfCa3
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default uhci_hcd UHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default uhci_hcd”
Device: usb 0x0001 “UHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1a.0”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #34 (USB Controller)

78: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
Unique ID: pBe4.9T1GDCLyFd9
Parent ID: 5YuN.nF6DdTfqnA9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default ehci_hcd EHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default ehci_hcd”
Device: usb 0x0002 “EHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1d.7”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 480 Mbps
Module Alias: “usb:v1D6Bp0002d0206dc09dsc00dp01ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (USB Controller)

79: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0
Unique ID: k4bc.cO89g+iefn1
Parent ID: sClz.rvtCYhTtuH9
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: “Linux 2.6.25.5-1.1-default ehci_hcd EHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.25.5-1.1-default ehci_hcd”
Device: usb 0x0002 “EHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:1a.7”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 480 Mbps
Module Alias: “usb:v1D6Bp0002d0206dc09dsc00dp01ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #32 (USB Controller)

80: PS/2 00.0: 10800 Keyboard
[Created at input.161]
UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input
Unique ID: EXC1.+49ps10DtUF
Hardware Class: keyboard
Model: “AT Translated Set 2 keyboard”
Vendor: 0x0001
Device: 0x0001 “AT Translated Set 2 keyboard”
Compatible to: int 0x0211 0x0001
Device File: /dev/input/event1
Device Files: /dev/input/event1, /dev/input/by-path/platform-i8042-serio-0-event-kbd
Device Number: char 13:65
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown

81: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port_logicaldev_input
Unique ID: AH6Q.5+smWHVjPI3
Hardware Class: mouse
Model: “PS/2 Mouse”
Vendor: 0x0002
Device: 0x0008 “PS/2 Mouse”
Compatible to: int 0x0210 0x0003
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-2-event-mouse, /dev/input/by-path/platform-i8042-serio-2-mouse
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown

82: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port_logicaldev_input_0
Unique ID: AH6Q.5+smWHVjPI3
Hardware Class: mouse
Model: “AlpsPS/2 ALPS GlidePoint”
Vendor: 0x0002
Device: 0x0008 “AlpsPS/2 ALPS GlidePoint”
Compatible to: int 0x0210 0x0003
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3, /dev/input/by-path/platform-i8042-serio-2-event-mouse, /dev/input/by-path/platform-i8042-serio-2-mouse
Device Number: char 13:63 (char 13:33)
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown

83: None 00.0: 10103 CPU
[Created at cpu.301]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: “GenuineIntel”
Model: 6.23.6 “Intel(R) Core™2 Duo CPU T9300 @ 2.50GHz”
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,nx,lm,constant_tsc,up,arch_perfmon,pebs,bts,pni,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,lahf_lm,ida
Clock: 2493 MHz
BogoMips: 4993.44
Cache: 6144 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown

84: None 00.0: 10000 Monitor
[Created at fb.71]
Unique ID: rdCR.EY_qmtb9YY0
Hardware Class: monitor
Model: “Generic Monitor”
Vendor: “Generic”
Device: “Monitor”
Resolution: 800x600@75Hz
Driver Info #0:
Max. Resolution: 800x600
Vert. Sync Range: 50-90 Hz
Hor. Sync Range: 31-48 kHz
Config Status: cfg=new, avail=yes, need=no, active=unknown

85: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: fLK9.ndpeucax6V1
SysFS ID: /class/net/pan0
Hardware Class: network interface
Model: “Ethernet network interface”
Driver: “bridge”
Device File: pan0
HW Address: 4a:26:21:c8:fd:ac
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown

86: None 00.0: 1070a WLAN
[Created at net.124]
Unique ID: AYEt.QXn1l67RSa1
Parent ID: y9sn.9RJazxQBVB3
SysFS ID: /class/net/wlan0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0b:00.0
Hardware Class: network interface
Model: “WLAN network interface”
Driver: “iwl4965”
Driver Modules: “iwl4965”
Device File: wlan0
HW Address: 00:21:5c:59:f3:41
Link detected: no
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (WLAN controller)

87: None 00.0: 10780 Network Interface
[Created at net.124]
Unique ID: agy+.GSopYcFr9cF
SysFS ID: /class/net/wmaster0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0b:00.0
Hardware Class: network interface
Model: “Network Interface”
Driver: “iwl4965”
Driver Modules: “iwl4965”
Device File: wmaster0
HW Address: 00:21:5c:59:f3:41
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown

88: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.ZsbDDe5iHR5
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:1c.0/0000:09:00.0
Hardware Class: network interface
Model: “Ethernet network interface”
Driver: “sky2”
Driver Modules: “sky2”
Device File: eth0
HW Address: 00:21:9b:d4:37:a1
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (Ethernet controller)

89: None 00.0: 10700 Loopback
[Created at net.124]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: “Loopback network interface”
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown

6

So the two in question are:

61: USB 00.3: 11500 Bluetooth Device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_413c_8126_noserial_if3
Unique ID: Wvej.uvbnOCg6r+F
Parent ID: 2jVo.SAMIiYMCz2F
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.3
SysFS BusID: 7-2.1:1.3
Hardware Class: bluetooth
Model: “Dell BCM2045”
Hotplug: USB
Vendor: usb 0x413c “Dell Computer Corp.”
Device: usb 0x8126 “BCM2045”
Revision: “3.67”
Speed: 12 Mbps
Module Alias: "usb:v413Cp8126d0367dcE0dsc01dp01icFEisc01ip00 "
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: “modprobe btusb”
Driver Info #1:
Driver Status: hci_usb is active
Driver Activation Cmd: “modprobe hci_usb”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #65 (Hub)

adcom_Corp_4503-event-mouse, /dev/input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-event-mouse, /dev/input/by-id/usb-Broadcom_Corp_4503-mouse, /dev/input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-mouse
Device Number: char 13:63 (char 13:34)
Speed: 12 Mbps
Module Alias: "usb:v0A5Cp4503d0100dc00dsc00dp00ic03isc01ip02 "
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #65 (Hub)

Does this look correct?

7

Yeah, I think so. Does anything look wrong with what i posted?

8

Well these are mine. Not identical to your, but both work perfectly:

On lenovo as in sig:

Mouse

39: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input
Unique ID: AH6Q.7qlGUQk7T34
Hardware Class: mouse
Model: “TPPS/2 IBM TrackPoint”
Vendor: 0x0002
Device: 0x000a “TPPS/2 IBM TrackPoint”
Compatible to: int 0x0210 0x0003
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown

hwinfo --bluetooth
01: USB 00.3: 11500 Bluetooth Device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_a5c_2110_noserial_if3
Unique ID: Xlzz.pGD2P1NnEOD
Parent ID: k4bc.MxUuepIFPaE
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.3
SysFS BusID: 1-1:1.3
Hardware Class: bluetooth
Model: “Broadcom BCM2045B”
Hotplug: USB
Vendor: usb 0x0a5c “Broadcom Corp.”
Device: usb 0x2110 “BCM2045B”
Revision: “1.00”
Speed: 12 Mbps
Module Alias: “usb:v0A5Cp2110d0100dcE0dsc01dp01icFEisc01ip00”
Driver Info #0:
Driver Status: hci_usb is active
Driver Activation Cmd: “modprobe hci_usb”
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (Hub)

I can’t really say why you mouse is not working properly. All you can do is try configuring it, or even perhaps try a different kernel to see if it works better then.

When you activate bluetooth on your laptop you should see the icon appear in the tray. You can configure from there. You should have a shortcut to start bluetooth, mine is Fn+F5

9

Alright, I’ll try messing around with it. Do you think the 11.1 release will fix these problems?

10

Is your laptop in here:
HCL/Laptops/Dell - openSUSE

11

Yes and no. I have an XPS M1530 - the list only has the M1330, which has similar internals.

12

Also - when I try to connect manually to my Bluetooth mouse, I get an error that reads:
Couldn’t display “obex://[00:07:61:*D0:C7:BF]/”/
Error: Host down
Please select another viewer and try again.

I really appreciate that you’re trying to help.

EDIT: Omit the star in the error - it was making a smiley face.

13

I booted to Mandriva, and I have the touchpad problem, but not the mouse. The mouse, however, lacks functionality, the wheel (click as well) and the forward and back buttons on it don’t work and I couldn’t figure out how to fix it.

So does this mean that the bluetooth software installed in openSUSE 11 isn’t the best for my mouse?

This also makes me believe that my touchpad is just screwed… any ideas?