Temperature sensors issue

Hello, I posted regarding this issue a while back but the thread got old and I was not able to resolve the problem.
However I am making a new thread since some things had changed and I would like to receive help from start.

The problem is whenever I run ‘sensors’ I get the following outpu

temp1:        +50.0°C  (crit = +128.0°C)
temp2:         +0.0°C  (crit = +128.0°C)
temp3:        +42.0°C  (crit = +128.0°C)
temp4:        +49.0°C  (crit = +128.0°C)
temp5:        +28.0°C  (crit = +128.0°C)
temp6:       +127.0°C  (crit = +128.0°C)
temp7:         +0.0°C  (crit = +128.0°C)
temp8:         +0.0°C  (crit = +128.0°C)


temp1, temp3, temp4 and temp5 change sometimes and they seem to be all-right, not that I know what they refer to anyway.
This temp6 however is not changing and it seems odd.
And my most important question:**
Is there any program to monitor my hardware that works fluently under Gnome 2?**

Please note that gnome-sensors-applet does not work. And I am willing to leave this with Gnome 2 for now.
Thanks!

On Tue 04 Jun 2013 06:56:04 PM CDT, zelivans wrote:

Hello, I posted regarding this issue a while back but the thread got old
and I was not able to resolve the problem.
However I am making a new thread since some things had changed and I
would like to receive help from start.

The problem is whenever I run ‘sensors’ I get the following outpu

Code:

temp1: +50.0°C (crit = +128.0°C)
temp2: +0.0°C (crit = +128.0°C)
temp3: +42.0°C (crit = +128.0°C)
temp4: +49.0°C (crit = +128.0°C)
temp5: +28.0°C (crit = +128.0°C)
temp6: +127.0°C (crit = +128.0°C)
temp7: +0.0°C (crit = +128.0°C)
temp8: +0.0°C (crit = +128.0°C)


temp1, temp3, temp4 and temp5 change sometimes and they seem to be
all-right, not that I know what they refer to anyway.
This temp6 however is not changing and it seems odd.
And my most important question:*
Is there any program to monitor my hardware that works fluently under
Gnome 2?*

Please note that gnome-sensors-applet does not work. And I am willing
to leave this with Gnome 2 for now.
Thanks!

Hi
Have you run sensors-detect? You may need to look at the sensor devices
and tweak the lm sensors configuration file for the detected chips.

Conky or gkrellmn for GNOME 2…


Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 12.3 (x86_64) Kernel 3.7.10-1.11-desktop
up 22:09, 3 users, load average: 0.08, 0.12, 0.13
CPU AMD Athlon™ II P360@2.30GHz | GPU Mobility Radeon HD 4200

@op- There is no supported version of gnome 2 in openSUSE unless you are using https://en.opensuse.org/openSUSE:Evergreen

On 2013-06-04 20:56, zelivans wrote:

> And my most important question:*
> Is there any program to monitor my hardware that works fluently under
> Gnome 2?*

I use gkrellm.
Gnome 2? It is obsolete, what distro are you using?


Cheers / Saludos,

Carlos E. R.
(from oS 12.3 “Dartmouth” GM (rescate 1))