Hello,
I am trying to get the video card on a Targus ACP50US to work on my Dell XPS M1210. I was able to find on the net that this device works Screen 1with the sisusbvga drivers from xorg.conf. After a little bit of tinkering, I was able to get a display from my device but all it shows was a gray screen but my primary screen displayed fine. I was wondering how I can get my ACP50US to work and able to use it as a primary display when I hook it up to my laptop. Here’s my config so far. Any suggestions? Thanks!!!
Jose
Section “ServerLayout”
Identifier “Layout[all]”
Screen “Screen[0]” 0 0
Screen Screen[SISUSBVGA] RightOf “Screen[0]”
InputDevice “Keyboard[0]” “CoreKeyboard”
InputDevice “Mouse[1]” “CorePointer”
InputDevice “Mouse[3]” “SendCoreEvents”
Option “Clone” “off”
Option “Xinerama” “off”
EndSection
Section “Files”
InputDevices “/dev/gpmdata”
InputDevices “/dev/input/mice”
FontPath “/usr/share/fonts/misc:unscaled”
FontPath “/usr/share/fonts/local”
FontPath “/usr/share/fonts/75dpi:unscaled”
FontPath “/usr/share/fonts/100dpi:unscaled”
FontPath “/usr/share/fonts/Type1”
FontPath “/usr/share/fonts/URW”
FontPath “/usr/share/fonts/Speedo”
FontPath “/usr/share/fonts/PEX”
FontPath “/usr/share/fonts/cyrillic”
FontPath “/usr/share/fonts/latin2/misc:unscaled”
FontPath “/usr/share/fonts/latin2/75dpi:unscaled”
FontPath “/usr/share/fonts/latin2/100dpi:unscaled”
FontPath “/usr/share/fonts/latin2/Type1”
FontPath “/usr/share/fonts/latin7/75dpi:unscaled”
FontPath “/usr/share/fonts/baekmuk:unscaled”
FontPath “/usr/share/fonts/japanese:unscaled”
FontPath “/usr/share/fonts/kwintv”
FontPath “/usr/share/fonts/truetype”
FontPath “/usr/share/fonts/uni:unscaled”
FontPath “/usr/share/fonts/CID”
FontPath “/usr/share/fonts/ucs/misc:unscaled”
FontPath “/usr/share/fonts/ucs/75dpi:unscaled”
FontPath “/usr/share/fonts/ucs/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/misc:unscaled”
FontPath “/usr/share/fonts/hellas/75dpi:unscaled”
FontPath “/usr/share/fonts/hellas/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/Type1”
FontPath “/usr/share/fonts/misc/sgi:unscaled”
FontPath “/usr/share/fonts/xtest”
FontPath “/opt/kde3/share/fonts”
EndSection
Section “Module”
Load “freetype”
Load “type1”
Load “dbe”
Load “glx”
Load “extmod”
EndSection
Section “ServerFlags”
Option “AllowMouseOpenFail” “on”
EndSection
Section “InputDevice”
Identifier “Keyboard[0]”
Driver “kbd”
Option “Protocol” “Standard”
Option “XkbLayout” “us”
Option “XkbModel” “microsoftpro”
Option “XkbRules” “xfree86”
EndSection
Section “InputDevice”
Identifier “Mouse[1]”
Driver “synaptics”
Option “Buttons” “5”
Option “Device” “/dev/input/mice”
Option “Emulate3Buttons” “on”
Option “InputFashion” “Mouse”
Option “Name” “Synaptics;Touchpad”
Option “Protocol” “explorerps/2”
Option “SHMConfig” “on”
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5”
EndSection
Section “InputDevice”
Identifier “Mouse[3]”
Driver “mouse”
Option “Buttons” “5”
Option “Device” “/dev/input/mice”
Option “Name” “ImPS/2 Generic Wheel Mouse”
Option “Protocol” “explorerps/2”
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5”
EndSection
Section “Modes”
Identifier “Modes[0]”
EndSection
Section “Monitor”
Identifier “Monitor[0]”
VendorName “SEC”
ModelName “PM822 121W1 LCD MONITOR”
UseModes “Modes[0]”
DisplaySize 261 163
HorizSync 30.0 - 62.0
VertRefresh 43.0 - 60.0
Option “CalcAlgorithm” “XServerPool”
Option “DPMS”
Option “PreferredMode” “1280x800”
EndSection
Section “Device”
Identifier “Device[0]”
Driver “nvidia”
VendorName “NVidia”
BoardName “GeForce Go 7400”
Screen 0
EndSection
Section “Screen”
Identifier “Screen[0]”
Device “Device[0]”
Monitor “Monitor[0]”
DefaultDepth 24
Option “RenderAccel” “True”
Option “AddARGBGLXVisuals” “True”
SubSection “Display”
Depth 15
Modes “1280x800” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
SubSection “Display”
Depth 16
Modes “1281x800” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
SubSection “Display”
Depth 24
Modes “1280x800” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
SubSection “Display”
Depth 8
Modes “1280x800” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
EndSection
Section “Extensions”
Option “Composite” “Enable”
EndSection
SISUSBVGA
Section “Device”
Identifier “Device[SISUSBVGA]”
VendorName “SiS” # Value does not matter
BoardName “SiS” # Value does not matter
Driver “sisusb”
EndSection
Section “Monitor”
Identifier “Monitor[SISUSBVGA]”
VendorName “Monitor Vendor” # value does not matter
ModelName “Monitor Model” # value does not matter
VertRefresh 50-75
HorizSync 30-90
EndSection
Section “Screen”
Identifier “Screen[SISUSBVGA]”
Device “Device[SISUSBVGA]”
Monitor “Monitor[SISUSBVGA]”
DefaultDepth 16
SubSection “Display”
Depth 16
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 8
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 24
Modes “1024x768” “800x600” “640x480”
EndSubSection
EndSection