system broken after update

On 2010-12-13 12:36, caf4926 wrote:
>
> Watch it happen here:
> http://dl.dropbox.com/u/10573557/acpi%20-t.mpeg

I waited for two or three minutes, nothing showed, I don’t think anything
downloaded.


Cheers / Saludos,

Carlos E. R.
(from 11.2 x86_64 “Emerald” at Telcontar)

Right click save

but for me it plays in my browser with smplayer

On 2010-12-13 16:06, caf4926 wrote:

> Right click save
>
> but for me it plays in my browser with smplayer

Ah! …] Funny way of pasting a command :slight_smile:


Cheers / Saludos,

Carlos E. R.
(from 11.2 x86_64 “Emerald” at Telcontar)

Watch it happen here:
http://dl.dropbox.com/u/10573557/acpi%20-t.mpeg
good though lacked voice:sarcastic:

Well, it is text, but it shows all. Gkrellm is graphic and nice. Both pull
the data from the same place.

wormulove

gkrellm shows following values
temp1 33 C
temp2 43
temp3 127
virtually same as sensors (think they are same with different interfaces)
the last temp value is all bothering me at this value CPU should shut down 

You have to run “sensors-detect” once to configure them. Hopefully the fans
will have values after that. If they don’t, and in windows they have, you
could report as a bug in bugzilla.

did that the best way will give a last try for any ray of light might struck otherwise bugzilla

Quick question: what do you use in windows to read those things?

wormulove

its a desktop and has no battery but dont know why it is giving
No support for device type: thermal
though in dual boot with win7 I use an app called speedfan and it give me all 4 core temperatures + rpm too 

it is speedfan442

caf4926

Quote Originally Posted by robin_listas View Post
On 2010-12-13 12:36, caf4926 wrote:
>
> Watch it happen here:
> http://dl.dropbox.com/u/10573557/acpi%20-t.mpeg

I waited for two or three minutes, nothing showed, I don't think anything
downloaded.

--
Cheers / Saludos,

Carlos E. R.
(from 11.2 x86_64 "Emerald" at Telcontar)
Right click save

but for me it plays in my browser with smplayer 

after 1-2 times I also did that after seeing the blank browser BTW the most important question here is that how you made that video?
secondly perhaps why does the temperature of suse is more than its counterparts under same condition
does it has to do anything with power management or graphics or some background process is eating up the CPU?

In a console type top and see if any process is eating up CPU cycles.

IMO this is a hardware issue. The hardware interfaces are often far from ‘standard’ and require additional software that is designed for that hardware. If you installed Windows from a box set you may have the same problems. You would need to install the main board drivers provided by the maker of the board for all the functions to work well. Since in most cases Windows is installed by the computer maker these are already pre-installed. But no one bothers to make the drivers for Linux. And there are far too many possible configurations to follow all the possible setups. Also often the interfaces are held as some sort of company secret so most have to be reverse engineered.

for more information I am pasting data of sensors-detect

Generated by sensors-detect on Mon Dec 13 23:01:40 2010

Path: Hardware/Sensors

Description: Defines the modules to used

Type: string

ServiceRestart: lm_sensors

Default: “”

This file is sourced by /etc/init.d/lm_sensors and defines the modules to

be loaded/unloaded.

The format of this file is a shell script that simply defines variables:

HWMON_MODULES for hardware monitoring driver modules, and optionally

BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES=“w83627ehf”

For compatibility reasons, modules are also listed individually as variables

MODULE_0, MODULE_1, MODULE_2, etc.

You should use BUS_MODULES and HWMON_MODULES instead if possible.

MODULE_0=w83627ehf

In a console type top and see if any process is eating up CPU cycles.

top is clean

IMO this is a hardware issue. The hardware interfaces are often far from ‘standard’ and require additional software that is designed for that hardware. If you installed Windows from a box set you may have the same problems. You would need to install the main board drivers provided by the maker of the board for all the functions to work well. Since in most cases Windows is installed by the computer maker these are already pre-installed. But no one bothers to make the drivers for Linux. And there are far too many possible configurations to follow all the possible setups. Also often the interfaces are held as some sort of company secret so most have to be reverse engineered.

yes the intel gave the dvd of drivers but it was only for Windows, so does that also mean that until I get the drivers for linux it is going to have the same problem .The computer is new with i3 and all.

after 1-2 times I also did that after seeing the blank browser BTW the most important question here is that how you made that video?

You guys need to get your multi-media sorted out. It’s really basic.

I made it with XVidCap (from Packman)

sure…always learning