Recently i bought a sitecom router and usb wlan dongle
but can’t get it work.
I have tried the ralink rtxxxx drivers and ndiswrapper
but suse doesnt seem to recognize the usb-stick.
My internal wlan is working just fine.
I’m new with linux and would appreciate some help.
Thanks,
some info:
system: hp pavilion s3621nl
Kernel: 2.6.27.45-0.1-default
lsusb: Bus 001 Device 003: ID 0df6:0041 Sitecom Europe B.V.
hwinfo:
61: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_df6_41_1_0_if0
Unique ID: Uc5H.nXb0NvQE43F
Parent ID: k4bc.QtYiGM_hXFF
SysFS ID: /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0
SysFS BusID: 1-4:1.0
Hardware Class: unknown
Model: “Sitecom Europe B.V 802.11 n WLAN”
Hotplug: USB
Vendor: usb 0x0df6 “Sitecom Europe B.V.”
Device: usb 0x0041 “802.11 n WLAN”
Revision: “1.01”
Serial ID: “1.0”
Speed: 480 Mbps
Module Alias: “usb:v0DF6p0041d0101dc00dsc00dp00icFFiscFFipFF”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #59 (Hub)
62: USB 00.0: 0282 WLAN controller
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0
Unique ID: MtLc.qqG_K37CToE
Parent ID: k4bc.QtYiGM_hXFF
SysFS ID: /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0
SysFS BusID: 1-6:1.0
Hardware Class: network
Model: “Ralink 802.11 bg WLAN”
Hotplug: USB
Vendor: usb 0x15a9 “Ralink”
Device: usb 0x0004 “802.11 bg WLAN”
Revision: “0.01”
Driver: “rt73usb”
Driver Modules: “rt73usb”
Device File: wlan0
Features: WLAN
Speed: 480 Mbps
HW Address: 00:22:5f:0f:51:f6
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: “usb:v15A9p0004d0001dc00dsc00dp00icFFiscFFipFF”
Driver Info #0:
Driver Status: rt73usb is active
Driver Activation Cmd: “modprobe rt73usb”
Driver Info #1:
Driver Status: rt73 is active
Driver Activation Cmd: “modprobe rt73”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #59 (Hub)