Hi all. )
After an update, sensors is no longer displaying fan speeds.
sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +41.0°C (high = +100.0°C, crit = +100.0°C)
Core 4: +42.0°C (high = +100.0°C, crit = +100.0°C)
Core 8: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 12: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 16: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 20: +42.0°C (high = +100.0°C, crit = +100.0°C)
Core 24: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 25: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 26: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 27: +38.0°C (high = +100.0°C, crit = +100.0°C)
Core 28: +41.0°C (high = +100.0°C, crit = +100.0°C)
Core 29: +41.0°C (high = +100.0°C, crit = +100.0°C)
Core 30: +41.0°C (high = +100.0°C, crit = +100.0°C)
Core 31: +41.0°C (high = +100.0°C, crit = +100.0°C)
spd5118-i2c-13-52
Adapter: SMBus I801 adapter at 0000:00:1f.4
ERROR: Can't get value of subfeature temp1_max_alarm: Can't read
temp1: +45.8°C (low = +0.0°C, high = +55.0°C)
(crit low = +0.0°C, crit = +85.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +45.0°C
ucsi_source_psy_USBC000:001-isa-0000
Adapter: ISA adapter
in0: 5.00 V (min = +5.00 V, max = +5.00 V)
curr1: 3.00 A (max = +3.00 A)
BAT0-acpi-0
Adapter: ACPI interface
in0: 12.04 V
power1: 0.00 W
mt7921_phy0-pci-2f00
Adapter: PCI adapter
temp1: +42.0°C
hp-isa-0000
Adapter: ISA adapter
fan1: 2011 RPM
fan2: 1795 RPM
pwm1: N/A
spd5118-i2c-13-50
Adapter: SMBus I801 adapter at 0000:00:1f.4
ERROR: Can't get value of subfeature temp1_max_alarm: Can't read
temp1: +46.5°C (low = +0.0°C, high = +55.0°C)
(crit low = +0.0°C, crit = +85.0°C)
nvme-pci-0300
Adapter: PCI adapter
Composite: +40.9°C (low = -0.1°C, high = +79.8°C)
(crit = +81.8°C)
Sensor 1: +41.9°C (low = -273.1°C, high = +65261.8°C)
Is this a bug?
Thanks.
