hello friends …
recently i configured sensors and when i command “sensors” showed this :
###############################################################
shravan@linux-eqli:~/Desktop> sensors
w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.19 V (min = +0.00 V, max = +1.74 V)
in1: +10.72 V (min = +0.90 V, max = +6.12 V) ALARM
AVCC: +3.36 V (min = +2.18 V, max = +0.26 V) ALARM
3VCC: +3.36 V (min = +2.22 V, max = +1.28 V) ALARM
in4: +1.86 V (min = +0.28 V, max = +0.02 V) ALARM
in5: +1.26 V (min = +1.63 V, max = +0.26 V) ALARM
in6: +0.28 V (min = +3.43 V, max = +1.08 V) ALARM
VSB: +3.30 V (min = +0.00 V, max = +1.38 V) ALARM
VBAT: +3.18 V (min = +2.35 V, max = +0.75 V) ALARM
Case Fan: 0 RPM (min = 1318 RPM, div = 128) ALARM
CPU Fan: 1196 RPM (min = 1278 RPM, div = 8) ALARM
Aux Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +66.0°C (high = +10.0°C, hyst = +87.0°C) sensor = diode
CPU Temp: +35.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +119.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +0.000 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +47.0°C (high = +86.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +47.0°C (high = +86.0°C, crit = +100.0°C)
###############################################################
as u see there are lot of alarm messages …
can somebody explain me what may be the fault(s)…>
and please give some possible solution…>