Secure/nonsecure boot and graphic card (drivers) problems

English Install/Boot/Login
21 
localhost:~ # inxi -m
Memory:
  System RAM: total: 8 GiB available: 7.7 GiB used: 4.25 GiB (55.3%)
  Array-1: capacity: 64 GiB slots: 4 modules: 1 EC: None
  Device-1: ChannelA-DIMM0 type: DDR4 size: 8 GiB speed: 2666 MT/s
  Device-2: ChannelA-DIMM1 type: no module installed
  Device-3: ChannelB-DIMM0 type: no module installed
  Device-4: ChannelB-DIMM1 type: no module installed
localhost:~ #
22

With only one 8G RAM stick installed, your RAM speed is only a little more than half the speed it is capable of . I recommend adding a matching 8G stick, both to increase RAM speed, and to make RAM used by iGPU relatively trivial. With most modern BIOS, the amount of shared RAM devoted to iGPU can be adjusted to need, commonly limited to a maximum of 1G, which would be 6.25% of 16G. Likely you don’t need to allocate more than 256M, or about 1.5%. You could limit it to 256M without adding more, and still only be allocating 3.125% of total to iGPU.

23

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.