Hi, openSUSE Tumbleweed here 20241210. X11 KDE desktop environment. Main display is blank after unlocking. A workaround is to system settings > display configuration > main monitor (in this case) , change from 60 Hz to 50 Hz and apply. Then can apply 60 Hz and taskbar is back.
I forgot to mention that this is a ‘dual head’ setup with main monitor on the right side.
What is your GPU and driver?: inxi -GSaz
1 Like
Hi, thank you for your response.
inxi -GSaz
System:
Kernel: 6.11.8-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.11.8-1-default
root=/dev/mapper/system-root resume=/dev/system/swap splash=0
plymouth.enable=0 mitigations=auto security=selinux selinux=1
Desktop: KDE Plasma v: 6.2.4 tk: Qt v: N/A info: frameworks v: 6.8.0
wm: kwin_x11 with: krunner tools: avail: xscreensaver vt: 2 dm: SDDM
Distro: openSUSE Tumbleweed 20241210
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Lexa [Radeon 540X/550X/630 / RX
640 E9171 MCM] vendor: Dell driver: amdgpu v: kernel arch: GCN-4
code: Arctic Islands process: GF 14nm built: 2016-20 pcie: gen: 3
speed: 8 GT/s lanes: 8 ports: active: DP-2,DP-3 empty: DP-1
bus-ID: 01:00.0 chip-ID: 1002:6987 class-ID: 0300 temp: 53.0 C
Device-2: HP HP Webcam HD-2200 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-11:4
chip-ID: 03f0:a707 class-ID: 0102
Display: x11 server: X.Org v: 21.1.14 with: Xwayland v: 24.1.4
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting,vesa
alternate: fbdev dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3600x1080 s-dpi: 96 s-size: 952x285mm (37.48x11.22")
s-diag: 994mm (39.12")
Monitor-1: DP-2 mapped: DisplayPort-1 pos: bottom-l model: Dell 2208WFP
serial: built: 2009 res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2
size: 473x296mm (18.62x11.65") diag: 558mm (22") ratio: 16:10 modes:
max: 1680x1050 min: 720x400
Monitor-2: DP-3 mapped: DisplayPort-2 pos: primary,top-right model: LG
(GoldStar) IPS FULLHD built: 2014 res: 1920x1080 hz: 60 dpi: 102
gamma: 1.2 size: 480x270mm (18.9x10.63") diag: 551mm (21.7") ratio: 16:9
modes: max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.3.1 glx-v: 1.4
direct-render: yes renderer: AMD Radeon RX 640 (radeonsi polaris12 LLVM
19.1.5 DRM 3.59 6.11.8-1-default) device-ID: 1002:6987 memory: 3.91 GiB
unified: no
API: Vulkan v: 1.3.296 layers: 5 device: 0 type: discrete-gpu name: AMD
Radeon RX 640 (RADV POLARIS12) driver: N/A device-ID: 1002:6987
surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 19.1.5 256
bits) driver: N/A device-ID: 10005:0000 surfaces: xcb,xlib
-Regards
Inxi reports primary display is the larger of the two. If you disagree that your “main” equates to primary, please indicate.
Before changing anything, I suggest to install if necessary, then run glmark2 to get a performance baseline. Next, remove xf86-video-amdgpu and restart X to see whether same issue continues, and check glmark2. If glmark2 is significantly reduced, a different approach may be required, depending on your own perception of the difference.
1 Like
Try to use DP-1 & DP-2.
EGL driver is not installed, vulkan driver is not installed.
Code tags was not used.
1 Like
This Dell branded video card has 3 display outputs. One display port and two mini display port/ports. I do not have another mini display port cable currently.
History > Prior suggest that I install amdgpu-pro via AMD website, I did so. amdgpu was then removed.
zypper se -si amdgpu
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+------------------------+---------+-----------------------+--------+------------------
i+ | amdgpu-install | package | 6.1.60103-1787201.el9 | noarch | (System Packages)
i+ | amdgpu_top | package | 0.9.2-1.1 | x86_64 | repo-oss
i+ | kernel-firmware-amdgpu | package | 20241128-1.1 | noarch | repo-oss
i | libdrm_amdgpu1 | package | 2.4.124-1.1 | x86_64 | repo-oss
i | libdrm_amdgpu1-32bit | package | 2.4.124-1.1 | x86_64 | repo-oss
i+ | xf86-video-amdgpu | package | 23.0.0-3.1 | x86_64 | repo-oss
zypper se -si egl
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+------------------------------------------+---------+----------------------+--------+-------------------
i | gegl-0_4 | package | 0.4.50-2.1 | x86_64 | repo-oss
i | libgegl-0_4-0 | package | 0.4.50-2.1 | x86_64 | repo-oss
i+ | libnvidia-egl-wayland1 | package | 1.1.16-5.1 | x86_64 | repo-oss
i | libQt6WaylandEglClientHwIntegration6 | package | 6.8.1-1.1 | x86_64 | repo-oss
i | libQt6WaylandEglCompositorHwIntegration6 | package | 6.8.1-1.1 | x86_64 | repo-oss
i | libwayland-egl1 | package | 1.23.1-1.1 | x86_64 | repo-oss
i | libwayland-egl1-32bit | package | 1.23.1-1.1 | x86_64 | repo-oss
i | Mesa-demo-egl | package | 9.0.0-3.3 | x86_64 | repo-oss
i+ | Mesa-libEGL1 | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
EGL is installed correctly?
zypper se -si vulkan
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+---------------------------------+---------+----------------------+--------+-------------------
i+ | libgstvulkan-1_0-0 | package | 1.24.9-1.1 | x86_64 | repo-oss
i | libvulkan1 | package | 1.3.296-1.1 | x86_64 | repo-oss
i | libvulkan1-32bit | package | 1.3.296-1.1 | x86_64 | repo-oss
i+ | libvulkan_intel | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | libvulkan_intel-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | libvulkan_lvp | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | libvulkan_radeon | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | libvulkan_radeon-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-vulkan-device-select | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-vulkan-device-select-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i | vulkan-tools | package | 1.3.296-1.1 | x86_64 | repo-oss
Vulkan driver is not installed?
xrandr
Screen 0: minimum 320 x 200, current 3600 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 connected 1680x1050+0+15 (normal left inverted right x axis y axis) 473mm x 296mm
1680x1050 59.95*+
1280x1024 75.02 60.02
1440x900 59.95
1280x800 59.95
1152x864 75.00
1280x720 59.95
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
DisplayPort-2 connected primary 1920x1080+1680+0 (normal left inverted right x axis y axis) 480mm x 270mm
1920x1080 60.00*+ 50.00 59.94
1680x1050 59.88
1400x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1440x900 59.90
1280x800 59.91
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DP-1 & DP-2 are shown in use.
First glmark2 score is glmark2 Score: 7868
Still proceed with removal of amdgpu-pro as a next step? If have other suggestions please do provide.
-Regards.
Drivers from https://repo.radeon.com/ are only available for Leap.
AMD has dropped support for GCN4 years ago.
Uninstall all stuff from https://repo.radeon.com/. Reboot. Install drivers from TW repos.
Connect your mini-DP cable to 1st DP port (DisplayPort-0).
1 Like
Hi, second glmark2Score: 5792.
First glmark2 score is 7868 , why is this?
Amdgpu-pro was causing bad problems?
zypper se -si amd
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+------------------------+---------+--------------+--------+-----------
i+ | amdgpu_top | package | 0.9.2-1.1 | x86_64 | repo-oss
i+ | kernel-firmware-amdgpu | package | 20241128-1.1 | noarch | repo-oss
i | libamd3 | package | 7.8.3-1.1 | x86_64 | repo-oss
i | libcamd3 | package | 7.8.3-1.1 | x86_64 | repo-oss
i | libccolamd3 | package | 7.8.3-1.1 | x86_64 | repo-oss
i | libcolamd3 | package | 7.8.3-1.1 | x86_64 | repo-oss
i | libdrm_amdgpu1 | package | 2.4.124-1.1 | x86_64 | repo-oss
i | libdrm_amdgpu1-32bit | package | 2.4.124-1.1 | x86_64 | repo-oss
i | libteamdctl0 | package | 1.32-2.1 | x86_64 | repo-oss
i+ | ucode-amd | package | 20241128-1.1 | noarch | repo-oss
i+ | xf86-video-amdgpu | package | 23.0.0-3.1 | x86_64 | repo-oss
Current
xrandr
Screen 0: minimum 320 x 200, current 3600 x 1080, maximum 16384 x 16384
DisplayPort-0 connected 1680x1050+0+15 (normal left inverted right x axis y axis) 473mm x 296mm
1680x1050 59.95*+
1280x1024 75.02 60.02
1440x900 59.95
1280x800 59.95
1152x864 75.00
1280x720 59.95
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
DisplayPort-2 connected primary 1920x1080+1680+0 (normal left inverted right x axis y axis) 480mm x 270mm
1920x1080 60.00*+ 50.00 59.94
1680x1050 59.88
1400x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1440x900 59.90
1280x800 59.91
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
inxi -GSaz
System:
Kernel: 6.11.8-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.11.8-1-default
root=/dev/mapper/system-root resume=/dev/system/swap splash=0
plymouth.enable=0 mitigations=auto security=selinux selinux=1
Desktop: KDE Plasma v: 6.2.4 tk: Qt v: N/A info: frameworks v: 6.8.0
wm: kwin_x11 tools: avail: xscreensaver vt: 2 dm: SDDM Distro: openSUSE
Tumbleweed 20241210
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Lexa [Radeon 540X/550X/630 / RX
640 E9171 MCM] vendor: Dell driver: amdgpu v: kernel arch: GCN-4
code: Arctic Islands process: GF 14nm built: 2016-20 pcie: gen: 3
speed: 8 GT/s lanes: 8 ports: active: DP-1,DP-3 empty: DP-2
bus-ID: 01:00.0 chip-ID: 1002:6987 class-ID: 0300 temp: 58.0 C
Device-2: HP HP Webcam HD-2200 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-11:5
chip-ID: 03f0:a707 class-ID: 0102
Display: x11 server: X.Org v: 21.1.14 with: Xwayland v: 24.1.4
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting,vesa
alternate: fbdev dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3600x1080 s-dpi: 96 s-size: 952x285mm (37.48x11.22")
s-diag: 994mm (39.12")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: bottom-l model: Dell 2208WFP
serial: <filter> built: 2009 res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2
size: 473x296mm (18.62x11.65") diag: 558mm (22") ratio: 16:10 modes:
max: 1680x1050 min: 720x400
Monitor-2: DP-3 mapped: DisplayPort-2 pos: primary,top-right model: LG
(GoldStar) IPS FULLHD built: 2014 res: 1920x1080 hz: 60 dpi: 102
gamma: 1.2 size: 480x270mm (18.9x10.63") diag: 551mm (21.7") ratio: 16:9
modes: max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
drv: radeonsi inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.3.1 glx-v: 1.4
direct-render: yes renderer: AMD Radeon RX 640 (radeonsi polaris12 LLVM
19.1.5 DRM 3.59 6.11.8-1-default) device-ID: 1002:6987 memory: 3.91 GiB
unified: no
API: Vulkan v: 1.3.296 layers: 5 device: 0 type: discrete-gpu name: AMD
Radeon RX 640 (RADV POLARIS12) driver: N/A device-ID: 1002:6987
surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 19.1.5 256
bits) driver: N/A device-ID: 10005:0000 surfaces: xcb,xlib
I tested suspend 1 time…seems perfect.
I tested screen lock 2 times seems perfect.
Can you offer further suggestion at this time?
-Thank you for your help, the machine GPU seems to be working much better now. 
You mix Packman and openSUSE repos.
Use one of them.
From Packman you need only VA API (VDPAU) drivers. Or install all Mesa 3D from Packman.
1 Like
Mesa 3D and VDPAU packages will now come from only Packman (I think)?
zypper se -si mesa
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+---------------------------------+---------+----------------------+--------+-------------------
i | libOSMesa8 | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i | libOSMesa8-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i | Mesa-demo-egl | package | 9.0.0-3.3 | x86_64 | repo-oss
i | Mesa-demo-x | package | 9.0.0-3.3 | x86_64 | repo-oss
i+ | Mesa-dri | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-dri-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-gallium | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-gallium-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-libEGL1 | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-libGL1 | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-libGL1-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-libglapi0 | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-libglapi0-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-libva | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-vulkan-device-select | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | Mesa-vulkan-device-select-32bit | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
zypper se -si vdpau
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+------------------+---------+----------------------+--------+-------------------
i | libvdpau1 | package | 1.5-2.2 | x86_64 | repo-oss
i | libvdpau1-32bit | package | 1.5-2.2 | x86_64 | repo-oss
i+ | libvdpau_nouveau | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
i+ | vlc-vdpau | package | 3.0.21-1699.8.pm.5 | x86_64 | packman-essentials
Is this correct, or further instruction of how to correct this if not?
-Thanks
Looks good.
VDPAU is not needed for AMD hardware, just adds additional possibilities.
Post
zypper se -si libva
Install vainfo and post
vainfo
2 Likes
zypper se -si libva
Loading repository data...
Reading installed packages...
S | Name | Type | Version | Arch | Repository
---+------------------------+---------+----------------------+--------+-------------------
i | libva-drm2 | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva-drm2-32bit | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva-glx2 | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva-wayland2 | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva-x11-2 | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva-x11-2-32bit | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva2 | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libva2-32bit | package | 2.22.0-1.1 | x86_64 | repo-oss
i | libvapoursynth-70 | package | 70-1.1 | x86_64 | repo-oss
i | libvapoursynth-script0 | package | 70-1.1 | x86_64 | repo-oss
i+ | Mesa-libva | package | 24.3.1-1699.400.pm.1 | x86_64 | packman-essentials
Cannot install vainfo here?
zypper se va*
Loading repository data...
Reading installed packages...
S | Name | Summary | Type
---+-------------------------------------+-------------------------------------------------------------+-----------
| vacation | A way to automatically reply to incoming e-mail | package
| vacuum-im | Jabber client written with Qt | package
| vacuum-im-devel | Development files for Vacuum-IM | package
| vacuum-im-lang | Translations for package vacuum-im | package
| vacuum-im-plugins-dbusnotifications | Vacuum-IM notification messages through system DBus | package
| vacuum-im-plugins-gmailnotify | GMailNotify plugin for Vacuum-IM | package
| vacuum-im-plugins-spellchecker | Vacuum-IM spellchecker plugin | package
| vacuum-im-plugins-statistics | Vacuum-IM application statistics collection plugin | package
| vacuum-im-plugins-usermood | Vacuum-IM user mood plugin | package
| vacuum-im-plugins-usertune | Vacuum-IM User Tune Handler plugin | package
| vala | Programming language for GNOME | package
| vala-cmake-modules | Vala CMake modules | package
| vala-panel | A Gtk3 desktop panel based on Vala | package
| vala-panel-appmenu-lang | Languages for package vala-panel-appmenu | package
| vala-panel-devel | Development files for vala-panel | package
| vala-panel-lang | Translations for package vala-panel | package
| vala-panel-plugin-appmenu | AppMenu (Global Menu) plugin for vala-panel | package
| vala-panel-plugins-base | Plugins for vala-panel -- non-X11 plugins | package
| vala-panel-plugins-wnck | Plugins for vala-panel -- X11 plugins | package
| vala-panel-runner | Commands runner for vala-panel | package
| valadoc | Generator for API documentation from Vala source | package
| valadoc-doclet-devhelp | Devhelp plugin for the valadoc generator | package
| valadoc-doclet-gtkdoc | Gtkdoc plugin for valadoc | package
| valadoc-doclet-html | HTML plugin for valadoc | package
| vale | CLI tool to lint text with extensible markup format support | package
| valgrind | Memory Management Debugger | package
| valgrind-32bit | Memory Management Debugger | package
| valgrind-client-headers | Header files for for Valgrind | package
| valgrind-devel | Header files for for Valgrind | package
| valijson-devel | Development headers for valijson | package
| valkey | Persistent key-value database | package
| valkey-compat-redis | Conversion script and compatibility symlinks for Redis | package
| valkey-devel | Development header for Valkey module development | package
| valyriatear | Valyria Tear J-RPG game | package
| valyriatear | Valyria Tear J-RPG game | srcpackage
| valyriatear-lang | Translations for package valyriatear | package
| vamos | A automotive simulation framework | package
| vamos | A automotive simulation framework | srcpackage
| vamos-debuginfo | Debug information for package vamos | package
| vamos-debugsource | Debug sources for package vamos | package
| vamp-plugin-sdk | An API for audio analysis and feature extraction plugins | package
| vamp-plugin-sdk-devel | Development files for vamp-plugin-sdk | package
| vangers | Game engine for "Vangers: One for the Road" | package
| vangers | Game engine for "Vangers: One for the Road" | srcpackage
| vangers-debuginfo | Debug information for package vangers | package
| vangers-debugsource | Debug sources for package vangers | package
| vapoursynth-devel | Development files for VapourSynth | package
| vapoursynth-tools | Extra tools for VapourSynth | package
| varconf | A config handling library | srcpackage
| varconf-debugsource | Debug sources for package varconf | package
| varconf-devel | A config handling library headers and static libs | package
| variety | Wallpaper changer | package
| varlink-bash-completion | Bash Completion for libvarlink | package
| varlink-util | Varlink command line tools | package
| varlink-vim | Vim support for libvarlink | package
| varnish | Accelerator for HTTP services | package
| varnish-devel | Development files for Varnish | package
| vault-sync | Synchronize secrets between HashiCorp Vault instances | package
| vavoom | Source port of the DOOM game engine | package
| vavoom | Source port of the DOOM game engine | srcpackage
How to install vainfo?
libva package series is incorrect vendor (not packman)?
Is it true that vainfo is combined in libva-utils rpm package perhaps?
current on machine >
zypper se libva-utils
Loading repository data...
Reading installed packages...
S | Name | Summary | Type
---+-------------+-----------------------------------------------------------+--------
| libva-utils | A collection of utilities and examples to exercise VA-API | package
Not installed. So install libva-utils I think?
libva package series is incorrect vendor (not packman)?
-Regards
Hi, I have installed libva-utils see information below:
zypper info libva-utils
Loading repository data...
Reading installed packages...
Information for package libva-utils:
------------------------------------
Repository : repo-oss
Name : libva-utils
Version : 2.22.0-1.1
Arch : x86_64
Vendor : openSUSE
Installed Size : 3.2 MiB
Installed : Yes
Status : up-to-date
Source package : libva-utils-2.22.0-1.1.src
Upstream URL : https://github.com/intel/libva-utils
Summary : A collection of utilities and examples to exercise VA-API
Description :
libva-utils is a collection of utilities and examples to exercise
VA-API in accordance with the libva project.
A driver implementation is necessary to properly operate.
zypper se libva-utils
Loading repository data...
Reading installed packages...
S | Name | Summary | Type
---+-------------+-----------------------------------------------------------+--------
i+ | libva-utils | A collection of utilities and examples to exercise VA-API | package
-Thanks
Also I made sure all prior nvidia packages (from nvidia quadro k660) have been purged from the machine:
zypper se -si nvidia
Loading repository data…
Reading installed packages…
No matching items found.
The machine is experiencing Excellent behavior at this time!
Thanks
I think you meant libva-utils please do correct if I am wrong.
@panorain add the kernel option amdgpu.dc=0 and see if that helps…
Hi. today, coming to machine which was left in running state, unlocking screen. The Main monitor exhibited nothing but blank when unlocking … needed to adjust main monitor from 60hz to 50hz … then sent plasma bug report . In order for monitor to display background and taskerbar again correctly. Adding the amdgpu.dc=0 kernel parameter and then passing # grub2-mkconfig -o /boot/grub2/grub.cfg then finally dracut --regenerate-all --force After powercycling will pass cat /proc/cmdline to ensure amdgpu.dc=0 is an added parameter. testing machine out now…
-Thanks
One point to note is that after above is completed then powercycling. Main monitor set at 50hz… much more Flickering than seen before. Adjusted main monitor to 60hz respectively and Flickering diminished significantely…Testing more now…
-Thanks