collectNWData.sh V0.7.5.8 2016-05-22/17:35:50 - e8982e6 -iGUI-
This program comes with ABSOLUTELY NO WARRANTY; This is free software, and you are welcome to redistribute it under certain conditions
--- Which type of your network connection should be tested?
--- (1) Wireless connection (WLAN)
--- What's the type of networktopology?
--- (2) DSL HW router <---> LinuxClient
--- On which host is the script executed?
--- (1) LinuxClient
--- WLAN SSID to connect to: §§§§§§§§1
--- NWCollect is collecting networkconfiguration information into file collectNWData.txt ...
--- NWEliza is analyzing the system for common network configuration errors ...
!!! CND0500W: Channel 6 used by your accesspoint is also used by 1 other access points
!!! CND0230W: IPV6 enabled and may be the reason for network problems
!!! CND0450W: WLAN key masquerading is not fully tested on this distribution. Please check output file collectNWData.txt for visible WLAN keys and masquerade them manually
--- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions
--- about the error/warning messages and how to fix the problems on your own.
--- If you are unsuccessful then place the contents of file collectNWData.txt in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL for links)
--- and then paste the nopaste link on your favorite Linux forum.
==================================================================================================================
===== cat /etc/*-_]release || cat /etc/*-_]version =============================================================
/etc/os-release
/etc/SuSE-release
NAME="openSUSE Leap"
VERSION="42.1"
VERSION_ID="42.1"
PRETTY_NAME="openSUSE Leap 42.1 (x86_64)"
ID=opensuse
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:opensuse:42.1"
BUG_REPORT_URL="https://bugs.opensuse.org"
HOME_URL="https://opensuse.org/"
ID_LIKE="suse"
openSUSE 42.1 (x86_64)
VERSION = 42.1
CODENAME = Malachite
# /etc/SuSE-release is deprecated and will be removed in the future, use /etc/os-release instead
===== uname -a ===================================================================================================
Linux linux-pxjs 4.1.27-27-default #1 SMP PREEMPT Fri Jul 15 12:46:41 UTC 2016 (84ae57e) x86_64 x86_64 x86_64 GNU/Linux
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "^#|^$" | grep -v "=''" ================================
--- /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp'
DHCLIENT_SET_DEFAULT_ROUTE='yes'
NAME=@@@@@@
STARTMODE='auto'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_DEFAULT_KEY=@@@@@@
WIRELESS_ESSID=@@@@@@
WIRELESS_KEY_LENGTH=@@@@@@
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK=@@@@@@
===== ping tests =================================================================================================
Ping of 8.8.8.8 OK
Ping of www.google.com OK
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.178.1
nameserver fd00::3681:c4ff:fefa:a0c7
===== cat /etc/hosts =============================================================================================
127.0.0.1 localhost
===== (route -n && route -A inet6 -n) | egrep "(en|wl|eth|ath|ra|wlan|dsl|ppp)" ==================================
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.178.1 0.0.0.0 UG 600 0 0 wlan0
192.168.178.0 0.0.0.0 255.255.255.0 U 600 0 0 wlan0
Kernel IPv6 Routentabelle
Ziel Nächster Hop Flags Metric Ref Benutzer Iface
2a02:8108:9bbf:dac4:211:32ff:fe57:6533/128 :: UC 0 30 2 wlan0
2a02:8108:9bbf:dac4:68d:38ff:fe9c:b8b0/128 :: U 256 0 0 wlan0
2a02:8108:9bbf:dac4::/64 :: U 600 0 1 wlan0
2a02:8108:9bbf:dac4::/62 fe80::3681:c4ff:fefa:a0c7 UG 600 0 0 wlan0
fe80::/64 :: U 256 0 0 wlan0
::/0 fe80::3681:c4ff:fefa:a0c7 UG 600 0 0 wlan0
ff02::16/128 :: UC 0 2 0 wlan0
ff02::fb/128 :: UC 0 167 0 wlan0
ff00::/8 :: U 256 0 2 wlan0
===== ifconfig (filtered for en|wl|eth|wlan|ra|ath|dsl|ppp) ======================================================
eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:5316 errors:0 dropped:1619 overruns:0 frame:0
TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:1384411 (1.3 Mb) TX bytes:318580 (311.1 Kb)
Interrupt:18
wlan0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#2
inet Adresse:192.168.178.103 Bcast:192.168.178.255 Maske:255.255.255.0
inet6 Adresse: fe80::68d:38ff:fe9c:b8b0/64 Gültigkeitsbereich:Verbindung
inet6 Adresse: 2a02:8108:9bbf:dac4:68d:38ff:fe9c:b8b0/128 Gültigkeitsbereich:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2777225 errors:0 dropped:1 overruns:0 frame:0
TX packets:1380172 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:3922757560 (3741.0 Mb) TX bytes:501514659 (478.2 Mb)
===== lspci ======================================================================================================
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81f8]
Kernel driver in use: sky2
--
06:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8812AE 802.11ac PCIe Wireless Network Adapter [10ec:8812] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8812AE 802.11ac PCIe Wireless Network Adapter [10ec:8812]
Kernel driver in use: rtl8821ae
Kernel modules: rtl8821ae
===== lsusb | grep -v "root hub" =================================================================================
Bus 006 Device 002: ID 046d:c025 Logitech, Inc. MX500 Optical Mouse
Bus 004 Device 004: ID 046d:c70c Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 004 Device 003: ID 046d:c70b Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 004 Device 002: ID 046d:0b02 Logitech, Inc. C-UV35 [Bluetooth Mini-Receiver] (HID proxy mode)
===== hwinfo (filtered) ==========================================================================================
35: PCI 300.0: 0200 Ethernet controller
Model: "Marvell 88E8056 PCI-E Gigabit Ethernet Controller"
Vendor: pci 0x11ab "Marvell Technology Group Ltd."
Device: pci 0x4364 "88E8056 PCI-E Gigabit Ethernet Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x81f8 "Motherboard"
Driver: "sky2"
Driver Modules: "sky2"
Device File: eth0
Link detected: no
Driver Status: sky2 is active
Driver Activation Cmd: "modprobe sky2"
38: PCI 600.0: 0282 WLAN controller
Model: "Realtek RTL8812AE 802.11ac PCIe Wireless Network Adapter"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8812 "RTL8812AE 802.11ac PCIe Wireless Network Adapter"
SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
SubDevice: pci 0x8812
Driver: "rtl8821ae"
Driver Modules: "rtl8821ae"
Device File: wlan0
Link detected: yes
Driver Status: rtl8821ae is active
Driver Activation Cmd: "modprobe rtl8821ae"
===== lsmod (filtered) ===========================================================================================
| af_packet | arc4 | bnep | ccm | cfg80211 |
| ctr | drm | drm_kms_helper | edac_core | edac_mce_amd |
| ehci_hcd | ehci_pci | hid_generic | i2c_algo_bit | i2c_piix4 |
| ip_tables | isofs | k10temp | kvm | kvm_amd |
| mac80211 | nfnetlink | nfnetlink_log | nfnetlink_queue | ohci_hcd |
| ohci_pci | rfkill | rtl8821ae | rtl_pci | rtlwifi |
| serio_raw | sg | shpchp | sky2 | sp5100_tco |
| sr_mod | ttm | usb_common | xhci_hcd | xhci_pci |
===== iwconfig ===================================================================================================
eth0 no wireless extensions.
wlan0 IEEE 802.11abgn ESSID:"§§§§§§§§1"
Mode:Managed Frequency:5.5 GHz Access Point: ##:##:##:##:##:#3
Bit Rate=30 Mb/s Tx-Power=26 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=10 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:58530 Missed beacon:0
===== ls /lib/firmware/*.{fw,ucode,bin} ==========================================================================
| agere_ap_fw.bin | agere_sta_fw.bin | ar5523.bin | ar7010.fw |
| ar7010_1_1.fw | ar9170-1.fw | ar9170-2.fw | ar9271.fw |
| ast_dp501_fw.bin | ath3k-1.fw | bnx2x-e1-4.8.53.0.fw | bnx2x-e1-5.2.13.0.fw |
| bnx2x-e1-5.2.7.0.fw | bnx2x-e1h-4.8.53.0.fw | bnx2x-e1h-5.2.13.0.fw | bnx2x-e1h-5.2.7.0.fw |
| carl9170-1.fw | cbfw-3.2.1.1.bin | cbfw-3.2.3.0.bin | cbfw-3.2.5.1.bin |
| ct2fw-3.2.1.1.bin | ct2fw-3.2.3.0.bin | ct2fw-3.2.5.1.bin | ctfw-3.2.1.1.bin |
| ctfw-3.2.3.0.bin | ctfw-3.2.5.1.bin | dvb-fe-xc4000-1.4.1.fw | dvb-fe-xc5000-1.6.114.fw |
| dvb-fe-xc5000c-4.1.30.7.fw| dvb-usb-dib0700-1.20.fw | dvb-usb-it9135-01.fw | dvb-usb-it9135-02.fw |
| dvb-usb-terratec-h5-drxk.fw| f2255usb.bin | hfi1_dc8051.fw | hfi1_fabric.fw |
| hfi1_pcie.fw | hfi1_sbus.fw | htc_7010.fw | htc_9271.fw |
| intelliport2.bin | iwlwifi-100-5.ucode | iwlwifi-1000-3.ucode | iwlwifi-1000-5.ucode |
| iwlwifi-105-6.ucode | iwlwifi-135-6.ucode | iwlwifi-2000-6.ucode | iwlwifi-2030-6.ucode |
| iwlwifi-3160-10.ucode | iwlwifi-3160-12.ucode | iwlwifi-3160-13.ucode | iwlwifi-3160-16.ucode |
| iwlwifi-3160-7.ucode | iwlwifi-3160-8.ucode | iwlwifi-3160-9.ucode | iwlwifi-3168-21.ucode |
| iwlwifi-3945-2.ucode | iwlwifi-4965-2.ucode | iwlwifi-5000-1.ucode | iwlwifi-5000-2.ucode |
| iwlwifi-5000-5.ucode | iwlwifi-5150-2.ucode | iwlwifi-6000-4.ucode | iwlwifi-6000g2a-5.ucode |
| iwlwifi-6000g2a-6.ucode | iwlwifi-6000g2b-5.ucode | iwlwifi-6000g2b-6.ucode | iwlwifi-6050-4.ucode |
| iwlwifi-6050-5.ucode | iwlwifi-7260-10.ucode | iwlwifi-7260-12.ucode | iwlwifi-7260-13.ucode |
| iwlwifi-7260-16.ucode | iwlwifi-7260-7.ucode | iwlwifi-7260-8.ucode | iwlwifi-7260-9.ucode |
| iwlwifi-7265-10.ucode | iwlwifi-7265-12.ucode | iwlwifi-7265-13.ucode | iwlwifi-7265-16.ucode |
| iwlwifi-7265-8.ucode | iwlwifi-7265-9.ucode | iwlwifi-7265D-10.ucode | iwlwifi-7265D-12.ucode |
| iwlwifi-7265D-13.ucode | iwlwifi-7265D-16.ucode | iwlwifi-7265D-21.ucode | iwlwifi-8000C-13.ucode |
| iwlwifi-8000C-16.ucode | iwlwifi-8000C-21.ucode | iwlwifi-8265-21.ucode | lbtf_usb.bin |
| lgs8g75.fw | mt7601u.bin | mt7650.bin | mts_mt9234mu.fw |
| mts_mt9234zba.fw | phanfw.bin | qat_895xcc.bin | qat_895xcc_mmp.bin |
| qat_c3xxx.bin | qat_c3xxx_mmp.bin | qat_c62x.bin | qat_c62x_mmp.bin |
| qat_mmp.bin | ql2100_fw.bin | ql2200_fw.bin | ql2300_fw.bin |
| ql2322_fw.bin | ql2400_fw.bin | ql2500_fw.bin | rp2.fw |
| rsi_91x.fw | rt2561.bin | rt2561s.bin | rt2661.bin |
| rt2860.bin | rt2870.bin | rt3070.bin | rt3071.bin |
| rt3090.bin | rt3290.bin | rt73.bin | s2250.fw |
| s2250_loader.fw | s5p-mfc-v6-v2.fw | s5p-mfc-v6.fw | s5p-mfc-v7.fw |
| s5p-mfc-v8.fw | s5p-mfc.fw | sdd_sagrad_1091_1098.bin| sms1xxx-hcw-55xxx-dvbt-02.fw |
| sms1xxx-hcw-55xxx-isdbt-02.fw| sms1xxx-nova-a-dvbt-01.fw| sms1xxx-nova-b-dvbt-01.fw| sms1xxx-stellar-dvbt-01.fw |
| tlg2300_firmware.bin | tr_smctr.bin | usbdux_firmware.bin | usbduxfast_firmware.bin |
| usbduxsigma_firmware.bin| v4l-cx231xx-avcore-01.fw| v4l-cx23418-apu.fw | v4l-cx23418-cpu.fw |
| v4l-cx23418-dig.fw | v4l-cx23885-avcore-01.fw| v4l-cx25840.fw | vntwusb.fw |
| wsm_22.bin |
===== iwlist scanning (filtered) =================================================================================
Channel:100
Frequency:5.5 GHz (Channel 100)
Quality=69/70 Signal level=-41 dBm
ESSID:"§§§§§§§§1"
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=48/70 Signal level=-62 dBm
ESSID:"§§§§§§§§2"
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=58/70 Signal level=-52 dBm
ESSID:"§§§§§§§§1"
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=60/70 Signal level=-50 dBm
ESSID:"§§§§§§§§3"
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=52/70 Signal level=-58 dBm
ESSID:"§§§§§§§§4"
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=52/70 Signal level=-58 dBm
ESSID:"§§§§§§§§3"
Channel:52
Frequency:5.26 GHz (Channel 52)
Quality=48/70 Signal level=-62 dBm
ESSID:"§§§§§§§§4"
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:YES networkmanager:YES nm-applet:NO
===== ===== egrep -i "^^#].*(persistent|networkmanager)" /etc/sysconfig/network/config ==========================
===== rfkill list wifi ===========================================================================================
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
===== Actual date for bias of following greps ====================================================================
11:22:21 2016-07-28
===== grep -i radio /var/log/syslog | tail -n 5 ==================================================================
/usr/bin/grep: /var/log/syslog: Datei oder Verzeichnis nicht gefunden
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
===== tail -n 300 /var/log/syslog | /usr/bin/grep -i firmware | tail -n 10 =======================================
tail: „/var/log/syslog“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
===== egrep 'en|wl|eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ====
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
===== egrep -r '(en.*|wl.*|eth|ath|wlan|ra)[0-9]+' /etc/modprobe.*|egrep -v -i '#|blacklist' =====================
/etc/modprobe.d/50-iwl3945.conf:options iwl3945 disable_hw_scan=1
==================================================================================================================
*** NWElizaStates
PNIN:1 CFR:1 IF:eth0 IM:2 IF:wlan0 IM:1 DI:2 AP:1 FALON:1 NIC:0 cNiC:2:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:0 NISS:0 IP6:1 KM:0 0 WLW:0 RTDT:SuSE GUI:1 UID:0
ich weiß nicht ob ich alles richtig gemacht habe.
es baut scheinbar eine verbindung auch im 5GHz berreich auf, mit höherer Geschwindigkeit:
468 / 6 5 GHz / ac / 80 MHz WPA2, 2 x 2
kann man dieses besser testen?
und das senden symetisch zu dem empfangen machen?
zu dem wird nicht mehr die geschwindigkeit in der kontrollleiste angezeigt nur noch “verbunden”
gibt es dafür eine bessere anzeige?