Rosegarden Crash immediately

English Multimedia
1

Can’t fire up Rosegarden

below the output of " /var/log/messages "

2022-08-14T16:50:32.193847+10:00 localhost systemd[1490]: Started Rosegarden - Sequencer and Notation Editor.
2022-08-14T16:50:32.274058+10:00 localhost rosegarden[18356]: Icon theme “Ambiant-MATE” not found.
2022-08-14T16:50:32.274148+10:00 localhost rosegarden[18356]: Icon theme “Mint-X” not found.
2022-08-14T16:50:32.274180+10:00 localhost rosegarden[18356]: Icon theme “Faenza-Dark” not found.
2022-08-14T16:50:32.274208+10:00 localhost rosegarden[18356]: Icon theme “KFaenza” not found.
2022-08-14T16:50:32.274238+10:00 localhost rosegarden[18356]: Icon theme “gnome” not found.
2022-08-14T16:50:32.375113+10:00 localhost rosegarden[18356]: [AlsaDriver] setCurrentTimer(): WARNING: using system timer with only 250 Hz resolution!
2022-08-14T16:50:32.401767+10:00 localhost rosegarden[18356]: [Composition] getTrackById( 0 ): WARNING: Track ID not found.
2022-08-14T16:50:32.401852+10:00 localhost rosegarden[18356]: [Composition] Available track ids are:
2022-08-14T16:50:32.412114+10:00 localhost kernel: 3031.460561][T18378] show_signal_msg: 51 callbacks suppressed
2022-08-14T16:50:32.412129+10:00 localhost kernel: 3031.460564][T18378] QThread[18378]: segfault at 100000008 ip 00007f2f3fda451e sp 00007f2ec3ffdcb0 error 4 in libc-2.31.so[7f2f3fd0b000+1e6000]
2022-08-14T16:50:32.412133+10:00 localhost kernel: 3031.460572][T18378] Code: 00 00 48 8b 4c 24 10 48 89 ea 48 89 43 10 48 83 ca 01 4d 85 e4 48 89 53 08 48 89 4b 18 48 89 2c 2b 4c 89 e3 0f 84 82 00 00 00 <48> 8b 53 08 89 d0 c1 e8 04 83 e8 02 49 8d 44 c5 10 49 39 c6 0f 85

does Rosegarden need a special icon theme ???

anyway thanks for your help

2

The icon theme is completely irrelevant. You have a segmentation fault in connection with libc-2.31

3

Post:

zypper se -si rosegarden

zypper lr -d
4

[FONT=monospace]zypper se -si rosegarden

resulted in :

[/FONT]

Loading repository data…
Reading installed packages…

S | Name | Type | Version | Arch | Repository
—±-----------±--------±-------------------±-------±-----------------------------
i+ | rosegarden | package | 21.06.1-bp154.1.51 | x86_64 | openSUSE:Backports:SLE-15-SP4
i+ | rosegarden | package | 21.06.1-bp154.1.51 | x86_64 | Main Repository

Note: For an extended search including not yet activated remote resources please use 'zypper 
search-packages'.

zypper lr -d
resulted in

[FONT=monospace]# | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI
| Service
—±-------------------------------------±--------------------------------------------------------------------------------------------±--------±----------±--------±---------±-------±---------------------------------------------
----------------------------------------±-------
1 | Packman | Packman | Yes | (r ) Yes | Yes | 99 | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/sus
e/openSUSE_Leap_15.4/ |
2 | dcss | dcss | Yes | (r ) Yes | Yes | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_
15.4/ |
4 | https-download.opensuse.org-1f3b55bc | SUSE:SLE-15-SP3:Update | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP3:/Update/pool-leap-15.4/ |
6 | https-download.opensuse.org-4a805681 | SUSE:SLE-15-SP2:Update | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP2:/Update/pool-leap-15.4/ |
7 | https-download.opensuse.org-6abed160 | SUSE:SLE-15-SP1:Update | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP1:/Update/pool-leap-15.4/ |
3 | https-download.opensuse.org-06ca4b9f | home:malcolmlewis:TESTING | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/ho
me:/malcolmlewis:/TESTING/15.4/ |
9 | https-download.opensuse.org-7a8c0282 | SUSE:SLE-15-SP4:GA | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP4:/GA/pool/ |
10 | https-download.opensuse.org-8f5255f0 | SUSE:SLE-15-SP1:GA | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP1:/GA/pool/ |
11 | https-download.opensuse.org-9fa24b85 | SUSE:SLE-15-SP2:GA | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP2:/GA/pool/ |
5 | https-download.opensuse.org-289fcb31 | SUSE:SLE-15-SP3:GA | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP3:/GA/pool/ |
8 | https-download.opensuse.org-746b52b6 | home:Dead_Mozay | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/ho
me:/Dead_Mozay/15.4/ |
12 | https-download.opensuse.org-c804d89e | openSUSE:Backports:SLE-15-SP4 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/op
enSUSE:/Backports:/SLE-15-SP4/standard/ |
13 | https-download.opensuse.org-df72d66c | home:hayos | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/ho
me:/hayos/15.4/ |
14 | https-download.opensuse.org-e09bc459 | SUSE:SLE-15:Update | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15:/Update/pool-leap-15.4/ |
15 | https-download.opensuse.org-e76df143 | SUSE:SLE-15-SP1:GA | Yes | ( p) Yes | Yes | 99 | NONE | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP1:/GA/pool/ |
16 | https-download.opensuse.org-ea3ce1bb | home:fsirl:fullpkgSLE15 | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/ho
me:/fsirl:/fullpkgSLE15/15.4/ |
17 | https-download.opensuse.org-edd18ebb | home:deltafox | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/ho
me:/deltafox/15.4/ |
18 | openSUSE-Leap-15.4-1 | openSUSE-Leap-15.4-1 | Yes | (r ) Yes | No | 99 | rpm-md | cd:/?devices=/dev/disk/by-id/ata-HL-DT-ST_BDD
VDRW_CH10LS20_K95A7N32943 |
19 | repo-backports-debug-update | Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/update/leap/15.4
/backports_debug/ |
20 | repo-backports-update | Update repository of openSUSE Backports | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.4
/backports/ |
21 | repo-debug | Debug Repository | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distributi
on/leap/15.4/repo/oss/ |
22 | repo-debug-non-oss | Debug Repository (Non-OSS) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/distributi
on/leap/15.4/repo/non-oss/ |
23 | repo-debug-update | Update Repository (Debug) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/lea
p/15.4/oss/ |
24 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS) | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/lea
p/15.4/non-oss/ |
25 | repo-non-oss | Non-OSS Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/lea
p/15.4/repo/non-oss/ |
26 | repo-oss | Main Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/distribution/lea
p/15.4/repo/oss/ |
27 | repo-sle-debug-update | Update repository with debuginfo for updates from SUSE Linux Enterprise 15 | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/update/lea
p/15.4/sle/ |
28 | repo-sle-update | Update repository with updates from SUSE Linux Enterprise 15 | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.4
/sle/ |
29 | repo-source | Source Repository | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/distribut
ion/leap/15.4/repo/oss/ |
30 | repo-update | Main Update Repository | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.4
/oss/ |
31 | repo-update-non-oss | Update Repository (Non-Oss) | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/15.4
/non-oss/ |
32 | snappy | snappy | Yes | (r ) Yes | Yes | 99 | rpm-md | https://download.opensuse.org/repositories/sy
stem:/snappy/openSUSE_Leap_15.4 |

[/FONT]

5

wow…

You should sort your Repos and delete the ones that you do not need…

rosegarden is starting fine in my Leap 15.4 VM.

6

ok try again

**192-168-1-105:/ #** zypper lr -d 
#  | Alias                                | Name                                                                                        | Enabled | GPG Check | Refresh | Priority | Type   | URI                                          
                                        | Service 
---+--------------------------------------+---------------------------------------------------------------------------------------------+---------+-----------+---------+----------+--------+----------------------------------------------
----------------------------------------+-------- 
 1 | Packman                              | Packman                                                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/sus
e/openSUSE_Leap_15.4/                   |  
 2 | dcss                                 | dcss                                                                                        | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_
15.4/                                   |  
 4 | https-download.opensuse.org-1f3b55bc | SUSE:SLE-15-SP3:Update                                                                      | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP3:/Update/pool-leap-15.4/  |  
 6 | https-download.opensuse.org-4a805681 | SUSE:SLE-15-SP2:Update                                                                      | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP2:/Update/pool-leap-15.4/  |  
 7 | https-download.opensuse.org-6abed160 | SUSE:SLE-15-SP1:Update                                                                      | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP1:/Update/pool-leap-15.4/  |  
 3 | https-download.opensuse.org-06ca4b9f | home:malcolmlewis:TESTING                                                                   | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/ho
me:/malcolmlewis:/TESTING/15.4/         |  
 9 | https-download.opensuse.org-7a8c0282 | SUSE:SLE-15-SP4:GA                                                                          | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP4:/GA/pool/                |  
10 | https-download.opensuse.org-8f5255f0 | SUSE:SLE-15-SP1:GA                                                                          | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP1:/GA/pool/                |  
11 | https-download.opensuse.org-9fa24b85 | SUSE:SLE-15-SP2:GA                                                                          | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP2:/GA/pool/                |  
 5 | https-download.opensuse.org-289fcb31 | SUSE:SLE-15-SP3:GA                                                                          | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP3:/GA/pool/                |  
 8 | https-download.opensuse.org-746b52b6 | home:Dead_Mozay                                                                             | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/ho
me:/Dead_Mozay/15.4/                    |  
12 | https-download.opensuse.org-c804d89e | openSUSE:Backports:SLE-15-SP4                                                               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/op
enSUSE:/Backports:/SLE-15-SP4/standard/ |  
13 | https-download.opensuse.org-df72d66c | home:hayos                                                                                  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/ho
me:/hayos/15.4/                         |  
14 | https-download.opensuse.org-e09bc459 | SUSE:SLE-15:Update                                                                          | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15:/Update/pool-leap-15.4/      |  
15 | https-download.opensuse.org-e76df143 | SUSE:SLE-15-SP1:GA                                                                          | Yes     | ( p) Yes  | Yes     |   99     | NONE   | https://download.opensuse.org/repositories/SU
SE:/SLE-15-SP1:/GA/pool/                |  
16 | https-download.opensuse.org-ea3ce1bb | home:fsirl:fullpkgSLE15                                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/ho
me:/fsirl:/fullpkgSLE15/15.4/           |  
17 | https-download.opensuse.org-edd18ebb | home:deltafox                                                                               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/ho
me:/deltafox/15.4/                      |  
18 | openSUSE-Leap-15.4-1                 | openSUSE-Leap-15.4-1                                                                        | Yes     | (r ) Yes  | No      |   99     | rpm-md | cd:/?devices=/dev/disk/by-id/ata-HL-DT-ST_BDD
VDRW_CH10LS20_K95A7N32943               |  
19 | repo-backports-debug-update          | Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/update/leap/15.4
/backports_debug/                       |  
20 | repo-backports-update                | Update repository of openSUSE Backports                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/backports/                             |  
21 | repo-debug                           | Debug Repository                                                                            | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distributi
on/leap/15.4/repo/oss/                  |  
22 | repo-debug-non-oss                   | Debug Repository (Non-OSS)                                                                  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distributi
on/leap/15.4/repo/non-oss/              |  
23 | repo-debug-update                    | Update Repository (Debug)                                                                   | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/lea
p/15.4/oss/                             |  
24 | repo-debug-update-non-oss            | Update Repository (Debug, Non-OSS)                                                          | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/lea
p/15.4/non-oss/                         |  
25 | repo-non-oss                         | Non-OSS Repository                                                                          | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/lea
p/15.4/repo/non-oss/                    |  
26 | repo-oss                             | Main Repository                                                                             | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/lea
p/15.4/repo/oss/                        |  
27 | repo-sle-debug-update                | Update repository with debuginfo for updates from SUSE Linux Enterprise 15                  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/lea
p/15.4/sle/                             |  
28 | repo-sle-update                      | Update repository with updates from SUSE Linux Enterprise 15                                | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/sle/                                   |  
29 | repo-source                          | Source Repository                                                                           | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribut
ion/leap/15.4/repo/oss/                 |  
30 | repo-update                          | Main Update Repository                                                                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/oss/                                   |  
31 | repo-update-non-oss                  | Update Repository (Non-Oss)                                                                 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/non-oss/                               |  
32 | snappy                               | snappy                                                                                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/sy
stem:/snappy/openSUSE_Leap_15.4         |

as to " repros " I guess once I installed the required software I won’t need the repro . I wonder about the SLE-15-**** repros . Is there some benefit to keep them?

…let’s go back to Rosegarden …

as to

The icon theme is completely irrelevant. You have a segmentation fault in connection with libc-2.31

Could it be that another audio type SW installation interferes with Rosegarden ?? i.e. if they use the same lib but require different versions ?
Since I record music with Ardour , I have a number of programs for sound creation feeding into Ardour.

7

I think you underestimate the answer of @Sauerland. You have a lot of non-openSUSE repos, they are SLE ones as even not of the same SLE version. We can not estimate what the result of such a mix is. Added to the fact that Rosegarden runs OK on a “normal” openSUSE Lwap 15.4, the packages from those non-openSUSE repos are very suspect.

We have of course no idea what you all have installed from there and why. Thus the careful expresson “unneeded” was used by @Sauerland. I will put it a bit stronger. You most probably have broken your system with those non-openSUSE products. My advice is: remove all those SLE repos (but take care, there are a few Update repos for openSUSE which also have SLE in their name, like Backports, do not remove those). Then you need probably a

zypper dup

to repair damage. After that try Rosegarden again.

8

These are my Repos

zypper lr -d
#  | Alias                                 | Name                                                                                        | Enabled | GPG Check | Refresh | Priority | Type     | URI                                                                       | Service
---+---------------------------------------+---------------------------------------------------------------------------------------------+---------+-----------+---------+----------+----------+---------------------------------------------------------------------------+--------
 1 | Libdvdcss                             | Libdvdcss                                                                                   | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://opensuse-guide.org/repo/openSUSE_Leap_15.4/                        | 
 2 | Programme                             | Programme                                                                                   | Yes     | ( p) Yes  | No      |   99     | plaindir | dir:/home/stephan/Programme                                               | 
 3 | Sauerland                             | Sauerland                                                                                   | Yes     | (r ) Yes  | Yes     |   30     | rpm-md   | http://download.opensuse.org/repositories/home:/Sauerland/15.4/           | 
 4 | Sauerland-Hardware                    | Sauerland-Hardware                                                                          | Yes     | (r ) Yes  | Yes     |   20     | rpm-md   | http://download.opensuse.org/repositories/home:/Sauerland:/hardware/15.4/ | 
 5 | ftp.gwdg.de-openSUSE_Leap_$releasever | Packman Repository                                                                          | Yes     | (r ) Yes  | Yes     |   20     | rpm-md   | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.4/        | 
 6 | non-oss                               | Non-OSS                                                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/distribution/leap/15.4/repo/non-oss/         | 
 7 | oss                                   | OSS                                                                                         | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/distribution/leap/15.4/repo/oss/             | 
 8 | repo-backports-debug-update           | Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/update/leap/15.4/backports_debug/            | 
 9 | repo-backports-update                 | Update repository of openSUSE Backports                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/update/leap/15.4/backports/                  | 
10 | repo-sle-debug-update                 | Update repository with debuginfo for updates from SUSE Linux Enterprise 15                  | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/debug/update/leap/15.4/sle/                  | 
11 | repo-sle-update                       | Update repository with updates from SUSE Linux Enterprise 15                                | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/update/leap/15.4/sle/                        | 
12 | update                                | update                                                                                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/update/leap/15.4/oss/                        | 
13 | update-non-oss                        | update-non-oss                                                                              | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/update/leap/15.4/non-oss/                    |

Repo 2 is a directory for my downloaded drivers for Brother etc., Repo 3 is my own OBS Repo, Repo 4 has some Hardware kmps I build for community and I have to check them, but these 3 Repos are not necessary for you and please do not use them, Repo 3 can break your system.

9

Thanks Hank and Sauerland, the above was certainly necessary ( done zypper dup ) from an overall system point of , and I will be careful in future

but !!!

the problem with Rosegarden is still there (did reboot )

2022-08-15T07:41:43.810840+10:00 localhost rosegarden[16327]: Icon theme "Ambiant-MATE" not found.
 2022-08-15T07:41:43.810945+10:00 localhost rosegarden[16327]: Icon theme "Mint-X" not found.
 2022-08-15T07:41:43.811002+10:00 localhost rosegarden[16327]: Icon theme "Faenza-Dark" not found.
 2022-08-15T07:41:43.811047+10:00 localhost rosegarden[16327]: Icon theme "KFaenza" not found.
 2022-08-15T07:41:43.811084+10:00 localhost rosegarden[16327]: Icon theme "gnome" not found.
 2022-08-15T07:41:43.940134+10:00 localhost kernel:   117.989954][T16348] QThread[16348]: segfault at 100000008 ip 00007f92b330451e sp 00007f92637fccb0 error 4 in libc-2.31.so[7f92b326b000+1e6000]
 2022-08-15T07:41:43.940147+10:00 localhost kernel:   117.989964][T16348] Code: 00 00 48 8b 4c 24 10 48 89 ea 48 89 43 10 48 83 ca 01 4d 85 e4 48 89 53 08 48 89 4b 18 48 89 2c 2b 4c 89 e3 0f 84 82 00 00 00 <48> 8b 53 08 89 d0 c1 e8 04 83 e8 02 49 8d 44 c5 10 49 39 c6 0f 85

I had the same problem with Leap 15.3 but never followed through 'cause I did not need Rosegarden.

The above error msg refers to a " libc-2.31.so " .When searching via SW-management , there no libc-2.31.so ???

Maybe that helps , the tail-end of zypper dup



(121/135) Installing: kernel-default-5.14.21-150400.24.18.1.x86_64 ..................................................................................................................................................................[done]
(122/135) Installing: libtbb2-2019_20190605-150200.3.2.1.x86_64 .....................................................................................................................................................................[done]
(123/135) Installing: python3-azure-batch-10.0.0-150100.7.8.2.noarch ................................................................................................................................................................[done]
(124/135) Installing: python3-azure-mgmt-compute-18.0.0-150100.6.11.2.noarch ........................................................................................................................................................[done]
(125/135) Installing: python3-azure-mgmt-containerregistry-3.0.0rc16-150100.6.8.2.noarch ............................................................................................................................................[done]
(126/135) Installing: python3-azure-mgmt-databoxedge-0.2.0-150100.3.7.2.noarch ......................................................................................................................................................[done]
(127/135) Installing: python3-azure-mgmt-network-17.0.0-150100.6.8.2.noarch .........................................................................................................................................................[done]
(128/135) Installing: python3-azure-mgmt-security-0.6.0-150100.3.7.2.noarch .........................................................................................................................................................[done]
(129/135) Installing: kernel-default-extra-5.14.21-150400.24.18.1.x86_64 ............................................................................................................................................................[done]
(130/135) Installing: azure-cli-2.17.1-150100.6.11.2.noarch .........................................................................................................................................................................[done]
(131/135) Installing: kernel-default-optional-5.14.21-150400.24.18.1.x86_64 .........................................................................................................................................................[done]
(132/135) Installing: chromium-104.0.5112.79-bp154.2.20.1.x86_64 ....................................................................................................................................................................[done]
(133/135) Installing: libopencv3_4-3.4.16-150400.1.9.x86_64 .........................................................................................................................................................................[done]
(134/135) Installing: libgmic1-3.0.2-bp154.1.29.x86_64 ..............................................................................................................................................................................[done]
(135/135) Installing: krita-plugin-gmic-3.0.2-bp154.1.29.x86_64 .....................................................................................................................................................................[done]
dracut: Executing: /usr/bin/dracut -f --kver 5.14.21-150400.24.18-default
dracut: dracut module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
dracut: dracut module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
dracut: dracut module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
dracut: dracut module 'systemd-repart' will not be installed, because command 'systemd-repart' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
dracut: dracut module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
dracut: dracut module 'systemd-repart' will not be installed, because command 'systemd-repart' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
dracut: dracut module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: suse-btrfs ***
dracut: *** Including module: suse-xfs ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: haveged ***
dracut: *** Including module: ostree ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including module: suse ***
dracut: *** Including module: suse-initrd ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:           real
dracut: Files:          1265
dracut: Linked:         1 files
dracut: Compared:       0 xattrs
dracut: Compared:       107 files
dracut: Saved:          692 B
dracut: Duration:       0.005227 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Store current command line parameters ***
dracut: Stored kernel commandline:
dracut: rd.driver.pre=btrfs
dracut:  resume=UUID=85201cbc-681e-4276-b5bc-09ef0835de3a resume=UUID=2c9ef43e-8624-4b0c-b19c-7fb5618907b9
dracut:  root=UUID=c15596c2-72e4-440e-9adb-2406154b043d rootfstype=btrfs rootflags=rw,relatime,ssd,space_cache,subvolid=266,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/boot/initrd-5.14.21-150400.24.18-default' ***
dracut: *** Creating initramfs image file '/boot/initrd-5.14.21-150400.24.18-default' done ***
Executing %posttrans scripts ........................................................................................................................................................................................................[done]
There are running programs which still use files and libraries deleted or updated by recent upgrades. They should be restarted to benefit from the latest updates. Run 'zypper ps -s' to list these programs.

Since the last system boot core libraries or services have been updated.
Reboot is suggested to ensure that your system benefits from these updates.
10

And your Repo list?

zypper lr -d
11

As @Saureland says. You apparently did a zypper dup, but what you changed on your repos is unclear. Please take into account that we only have this thread to communicate, no looking over shoulders, mo mind reading. This means you have to report everything you do, best with computer evidence. So not saying: changed my repos, but post your repo list.

BTW, you only show part of your zypper dup and that shows a lot of packages installed for a system that should have been up-to-date. :frowning: That is except when you had really a lot of “wrong” (not openSUSE Leap 15.4) packages.

About the dracut messages, forget them, they are not abnormal.

12 
**#** zypper lr -d 
#  | Alias                                | Name                                                                                        | Enabled | GPG Check | Refresh | Priority | Type   | URI                                          
                                        | Service 
---+--------------------------------------+---------------------------------------------------------------------------------------------+---------+-----------+---------+----------+--------+----------------------------------------------
----------------------------------------+-------- 
 1 | Packman                              | Packman                                                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/sus
e/openSUSE_Leap_15.4/                   |  
 2 | dcss                                 | dcss                                                                                        | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_
15.4/                                   |  
 3 | https-download.opensuse.org-c804d89e | openSUSE:Backports:SLE-15-SP4                                                               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/op
enSUSE:/Backports:/SLE-15-SP4/standard/ |  
 4 | openSUSE-Leap-15.4-1                 | openSUSE-Leap-15.4-1                                                                        | Yes     | (r ) Yes  | No      |   99     | rpm-md | cd:/?devices=/dev/disk/by-id/ata-HL-DT-ST_BDD
VDRW_CH10LS20_K95A7N32943               |  
 5 | repo-backports-debug-update          | Update repository with updates for openSUSE Leap debuginfo packages from openSUSE Backports | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/update/leap/15.4
/backports_debug/                       |  
 6 | repo-backports-update                | Update repository of openSUSE Backports                                                     | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/backports/                             |  
 7 | repo-debug                           | Debug Repository                                                                            | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distributi
on/leap/15.4/repo/oss/                  |  
 8 | repo-debug-non-oss                   | Debug Repository (Non-OSS)                                                                  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distributi
on/leap/15.4/repo/non-oss/              |  
 9 | repo-debug-update                    | Update Repository (Debug)                                                                   | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/lea
p/15.4/oss/                             |  
10 | repo-debug-update-non-oss            | Update Repository (Debug, Non-OSS)                                                          | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/lea
p/15.4/non-oss/                         |  
11 | repo-non-oss                         | Non-OSS Repository                                                                          | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/lea
p/15.4/repo/non-oss/                    |  
12 | repo-oss                             | Main Repository                                                                             | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/lea
p/15.4/repo/oss/                        |  
13 | repo-sle-debug-update                | Update repository with debuginfo for updates from SUSE Linux Enterprise 15                  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/lea
p/15.4/sle/                             |  
14 | repo-sle-update                      | Update repository with updates from SUSE Linux Enterprise 15                                | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/sle/                                   |  
15 | repo-source                          | Source Repository                                                                           | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribut
ion/leap/15.4/repo/oss/                 |  
16 | repo-update                          | Main Update Repository                                                                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/oss/                                   |  
17 | repo-update-non-oss                  | Update Repository (Non-Oss)                                                                 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4
/non-oss/                               |  
18 | snappy                               | snappy                                                                                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/sy
stem:/snappy/openSUSE_Leap_15.4         |

… should be ok now … ?

13

Delete Repo 3

 3 | https-download.opensuse.org-c804d89e | openSUSE:Backports:SLE-15-SP4                                                               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | https://download.opensuse.org/repositories/op
enSUSE:/Backports:/SLE-15-SP4/standard/ |

After this do:

zypper dup --allow-vendor-change

Break it and post it.

14

And #4 is the installation medium. Better disable (or even remove) that.

15 
**192-168-1-105:/ #** zypper se -si rosegarden 
Loading repository data... 
Reading installed packages... 

S  | Name       | Type    | Version            | Arch   | Repository 
---+------------+---------+--------------------+--------+---------------- 
i+ | rosegarden | package | 21.06.1-bp154.1.51 | x86_64 | Main Repository 

    Note: For an extended search including not yet activated remote resources please use 'zypper 
    search-packages'.




**192-168-1-105:/ #** zypper lr -d 
#  | Alias                 | Name                                                         | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                          | Service 
---+-----------------------+--------------------------------------------------------------+---------+-----------+---------+----------+--------+------------------------------------------------------------------------------+-------- 
 1 | Packman               | Packman                                                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.4/           |  
 2 | dcss                  | dcss                                                         | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_15.4/                           |  
 3 | repo-backports-update | Update repository of openSUSE Backports                      | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4/backports/                     |  
 4 | repo-non-oss          | Non-OSS Repository                                           | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.4/repo/non-oss/            |  
 5 | repo-oss              | Main Repository                                              | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.4/repo/oss/                |  
 6 | repo-sle-update       | Update repository with updates from SUSE Linux Enterprise 15 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4/sle/                           |  
 7 | repo-source           | Source Repository                                            | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/15.4/repo/oss/         |  
 8 | repo-update           | Main Update Repository                                       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4/oss/                           |  
 9 | repo-update-non-oss   | Update Repository (Non-Oss)                                  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.4/non-oss/                       |  
10 | snappy                | snappy

Still the same problem …

2022-08-18T06:50:53.235027+10:00 localhost systemd[1492]: Started Rosegarden - Sequencer and Notation Editor.
 2022-08-18T06:50:53.304730+10:00 localhost rosegarden[26827]: Icon theme "Ambiant-MATE" not found.
 2022-08-18T06:50:53.304837+10:00 localhost rosegarden[26827]: Icon theme "Mint-X" not found.
 2022-08-18T06:50:53.304893+10:00 localhost rosegarden[26827]: Icon theme "Faenza-Dark" not found.
 2022-08-18T06:50:53.304936+10:00 localhost rosegarden[26827]: Icon theme "KFaenza" not found.
 2022-08-18T06:50:53.305025+10:00 localhost rosegarden[26827]: Icon theme "gnome" not found.
 2022-08-18T06:50:53.436190+10:00 localhost kernel:  1641.483484][T26848] QThread[26848]: segfault at 100000008 ip 00007f7248ffc51e sp 00007f71f95e9cb0 error 4 in libc-2.31.so[7f7248f63000+1e6000]

 2022-08-18T06:50:53.436216+10:00 localhost kernel:  1641.483496][T26848] Code: 00 00 48 8b 4c 24 10 48 89 ea 48 89 43 10 48 83 ca 01 4d 85 e4 48 89 53 08 48 89 4b 18 48 89 2c 2b 4c 89 e3 0f 84 82 00 00 00 <48> 8b 53 08 89 d0 c1 e8 04 83 e8 02 49 8d 44 c5 10 49 39 c6 0f 85

just to show … it has been updated …

**192-168-1-105:/ #** zypper dup --allow-vendor-change 
Loading repository data... 
Reading installed packages... 
Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. 
Computing distribution upgrade... 
Nothing to do.

from that point of view it should be ok … but

2022-08-18T06:50:53.436190+10:00 localhost kernel:   1641.483484][T26848] QThread[26848]: segfault at 100000008 ip  00007f7248ffc51e sp 00007f71f95e9cb0 error 4 in  libc-2.31.so[7f7248f63000+1e6000]

… it works on your machine …why do I get a segfault ? As I said , I had the problem before. Now I am working on new HW . The OS runs on a ME ssd . However the other SSD have been move from my old computer.

16

There is the problem

I have a 2nd almost identical machine where I installed 15.4 onto a SSD M.2NVME.

Added Packman repro
installed JACK

installed Rosegarden FIRED UP OK ( have not tested it in detail )

installed

ZynaddsubFX Rosegarden OK
Zynaddsubfx vl2 ok
" " " vst ok

Zynaddsubfx DSSI => Rosengarden crashed with the same (as above) segfault relating to libc-2.31.so

17

Are you using KDE/Plasma?
Are you using wayland?

18

KDE/Plasma !

19

Is wayland running?

20

… I guess you are referring to " kwayland " => no , not running

… respectively no running process found => wayland