Hello again. After i managed to solve the driver problem, i now have this annoying issue. In ati catalyst control center, each time i set a resolution in kde, when i log out or reboot, it resets to the maximum resolution available. Nothing bad with the resolution except my monitor won’t display it with a refresh rate higher than 60hz, and it’s killing my eyes. Any ideea on how i can set a permanent resolution, without busting the driver config?(on earlier versions of suse, each time i tried to config the ati driver with sax, it would’ve destroyed my config). I am currently running suse 11. Thx
P.S. Now sax doesn’t detect a running dissplay. When i open it, it says “at leas one display must be running”. Everything is OK, except that resolution changing problem.
/…/
SaX generated X11 config file
Created on: 2008-09-10T23:01:37+0300.
Version: 8.1
Contact: Marcus Schaefer <sax@suse.de>, 2005
Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
Automatically generated by [ISaX] (8.1)
PLEASE DO NOT EDIT THIS FILE!
Section “ServerLayout”
Identifier “Layout[all]”
Screen 0 “aticonfig-Screen[0]-0” 0 0
InputDevice “Keyboard[0]” “CoreKeyboard”
InputDevice “Mouse[1]” “CorePointer”
Option “Clone” “off”
Option “Xinerama” “off”
EndSection
Section “Files”
InputDevices “/dev/gpmdata”
InputDevices “/dev/input/mice”
FontPath “/usr/share/fonts/misc:unscaled”
FontPath “/usr/share/fonts/local”
FontPath “/usr/share/fonts/75dpi:unscaled”
FontPath “/usr/share/fonts/100dpi:unscaled”
FontPath “/usr/share/fonts/Type1”
FontPath “/usr/share/fonts/URW”
FontPath “/usr/share/fonts/Speedo”
FontPath “/usr/share/fonts/PEX”
FontPath “/usr/share/fonts/cyrillic”
FontPath “/usr/share/fonts/latin2/misc:unscaled”
FontPath “/usr/share/fonts/latin2/75dpi:unscaled”
FontPath “/usr/share/fonts/latin2/100dpi:unscaled”
FontPath “/usr/share/fonts/latin2/Type1”
FontPath “/usr/share/fonts/latin7/75dpi:unscaled”
FontPath “/usr/share/fonts/baekmuk:unscaled”
FontPath “/usr/share/fonts/japanese:unscaled”
FontPath “/usr/share/fonts/kwintv”
FontPath “/usr/share/fonts/truetype”
FontPath “/usr/share/fonts/uni:unscaled”
FontPath “/usr/share/fonts/CID”
FontPath “/usr/share/fonts/ucs/misc:unscaled”
FontPath “/usr/share/fonts/ucs/75dpi:unscaled”
FontPath “/usr/share/fonts/ucs/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/misc:unscaled”
FontPath “/usr/share/fonts/hellas/75dpi:unscaled”
FontPath “/usr/share/fonts/hellas/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/Type1”
FontPath “/usr/share/fonts/misc/sgi:unscaled”
FontPath “/usr/share/fonts/xtest”
FontPath “/opt/kde3/share/fonts”
EndSection
Section “Module”
Load “dbe”
Load “type1”
Load “freetype”
Load “extmod”
Load “glx”
Load “dri”
EndSection
Section “ServerFlags”
Option “AllowMouseOpenFail” “on”
Option “ZapWarning” “on”
EndSection
Section “InputDevice”
Identifier “Keyboard[0]”
Driver “kbd”
Option “Protocol” “Standard”
Option “XkbLayout” “us”
Option “XkbModel” “microsoftpro”
Option “XkbRules” “xfree86”
EndSection
Section “InputDevice”
Identifier “Mouse[1]”
Driver “mouse”
Option “Buttons” “9”
Option “Device” “/dev/input/mice”
Option “Name” “ImExPS/2 Generic Explorer Mouse”
Option “Protocol” “explorerps/2”
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5”
EndSection
Section “Modes”
Identifier “Modes[0]”
ModeLine “1152x864” 106.5 1152 1224 1352 1552 864 865 868 903
ModeLine “1152x864” 97.7 1152 1224 1344 1536 864 865 868 900
ModeLine “1152x864” 90.0 1152 1224 1344 1536 864 865 868 897
ModeLine “1152x864” 81.6 1152 1216 1336 1520 864 865 868 895
ModeLine “1024x768” 94.4 1024 1088 1200 1376 768 769 772 807
ModeLine “1024x768” 83.7 1024 1080 1192 1360 768 769 772 803
ModeLine “1024x768” 74.2 1024 1080 1192 1360 768 769 772 799
ModeLine “1024x768” 64.1 1024 1080 1184 1344 768 769 772 795
ModeLine “1024x600” 77.4 1024 1080 1192 1360 600 601 604 632
ModeLine “1024x600” 67.6 1024 1080 1184 1344 600 601 604 629
ModeLine “1024x600” 58.1 1024 1072 1176 1328 600 601 604 625
ModeLine “1024x600” 49.0 1024 1064 1168 1312 600 601 604 622
ModeLine “800x600” 60.1 800 840 928 1056 600 601 604 632
ModeLine “800x600” 53.1 800 840 928 1056 600 601 604 629
ModeLine “800x600” 45.5 800 840 920 1040 600 601 604 625
ModeLine “800x600” 38.2 800 832 912 1024 600 601 604 622
ModeLine “768x576” 55.9 768 816 896 1024 576 577 580 607
ModeLine “768x576” 48.7 768 808 888 1008 576 577 580 604
ModeLine “768x576” 41.7 768 800 880 992 576 577 580 600
ModeLine “768x576” 35.0 768 792 872 976 576 577 580 597
ModeLine “640x480” 37.9 640 672 736 832 480 481 484 506
ModeLine “640x480” 33.5 640 672 736 832 480 481 484 503
ModeLine “640x480” 28.6 640 664 728 816 480 481 484 500
ModeLine “640x480” 23.9 640 656 720 800 480 481 484 497
EndSection
Section “Monitor”
Identifier “aticonfig-Monitor[0]-0”
Option “VendorName” “ATI Proprietary Driver”
Option “ModelName” “Generic Autodetecting Monitor”
Option “DPMS” “true”
EndSection
Section “Device”
Identifier “aticonfig-Device[0]-0”
Driver “fglrx”
BusID “PCI:1:0:0”
EndSection
Section “Screen”
Identifier “aticonfig-Screen[0]-0”
Device “aticonfig-Device[0]-0”
Monitor “aticonfig-Monitor[0]-0”
DefaultDepth 24
SubSection “Display”
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section “DRI”
Group “video”
Mode 0660
EndSection
That is my xorg.conf