Hello;
I need stable repository to get newer kernel than 3.7.10-1.16 for opensuse OS 12.3, which one?
Because with the kernel 3.7.10-1.16, I am facing error when loading, and I need to upgrade the kernel to get out from this error:
doing fast bootCreating devices nodes with udev
1.274132] [drm:drm_pci_agp_init] ERROR Cannot initialize the agpgart module
[1.274726] DRM: Fill_in_dev failed](http://lists.opensuse.org/opensuse-bugs/2013-06/msg01968.html)
And below is my hardware spec:
CPU:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 58
Stepping: 9
CPU MHz: 1600.000
BogoMIPS: 6784.77
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Graphics and others:
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03)
03:08.0 Ethernet controller: Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) (rev 11)
Regards
Bilal
bghayad wrote:
>
> Hello;
>
> I need stable repository to get newer kernel than 3.7.10-1.16 for
> opensuse OS 12.3, which one?
>
> Because with the kernel 3.7.10-1.16, I am facing error when loading, and
> I need to upgrade the kernel to get out from this error:
>
> 'doing fast boot
> ’
> (http://lists.opensuse.org/opensuse-bugs/2013-06/msg01968.html)Creating
> devices nodes with udev
> 1.274132] [drm:drm_pci_agp_init] ERROR Cannot initialize the agpgart
> module
> ‘[1.274726] DRM: Fill_in_dev failed’
> (http://lists.opensuse.org/opensuse-bugs/2013-06/msg01968.html)
>
> And below is my hardware spec:
>
> CPU:
>
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 2
> Core(s) per socket: 4
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 58
> Stepping: 9
> CPU MHz: 1600.000
> BogoMIPS: 6784.77
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 8192K
> NUMA node0 CPU(s): 0-7
>
> Graphics and others:
>
> lspci
> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
> processor DRAM Controller (rev 09)
> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd
> Gen Core processor Graphics Controller (rev 09)
> 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
> Family USB xHCI Host Controller (rev 04)
> 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series
> Chipset Family MEI Controller #1 (rev 04)
> 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
> Connection (rev 04)
> 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
> Family USB Enhanced Host Controller #2 (rev 04)
> 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset
> Family High Definition Audio Controller (rev 04)
> 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
> Family PCI Express Root Port 1 (rev c4)
> 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
> Family PCI Express Root Port 3 (rev c4)
> 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
> Family USB Enhanced Host Controller #1 (rev 04)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
> 00:1f.0 ISA bridge: Intel Corporation Q77 Express Chipset LPC Controller
> (rev 04)
> 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller
> [RAID mode] (rev 04)
> 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family
> SMBus Controller (rev 04)
> 02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI
> Express-to-PCI Bridge (rev 03)
> 03:08.0 Ethernet controller: Digium, Inc. Wildcard AEX800 8-port analog
> card (PCI-Express) (rev 11)
>
>
> Regards
> Bilal
>
>
checkout :-
http://forums.opensuse.org/blogs/jdmcdaniel3/opensuse-installing-new-linux-kernel-versions-134/
–
GNOME 3.6.2
openSUSE Release 12.3 (Dartmouth) 64-bit
Kernel Linux 3.7.10-1.16-desktop
PiElle
3
Or add this one:
Index of /repositories/Kernel:/stable/standard
And, for that matter, have a look at this page:
Packages