rc2 update

Hi to all,

I updated RC1 this morning with no
problems. It does not show as RC2,
but as suse 11.2.
Nearly 800 megs of updates and new
packages.

1394,dvgrab, kino, kdenlive do not load
but hope fully that will change when the
packman repo comes on line.

very fast to load and shut down.KDE seems
very stable.

rushman (jim)

rushman wrote:

>
> Hi to all,
>
> I updated RC1 this morning with no
> problems. It does not show as RC2,
> but as suse 11.2.
> Nearly 800 megs of updates and new
> packages.
>
> 1394,dvgrab, kino, kdenlive do not load
> but hope fully that will change when the
> packman repo comes on line.
>
> very fast to load and shut down.KDE seems
> very stable.
>
> rushman (jim)
>
>
what repos did you use?


Russ [openSUSE 11.2 (2.6.31.3-1-Default [x86_64]) KDE 4.3.1 release 6, Intel
DX48BT2 Core 2 Dual E7200. 4 GB DDR III GeForce 8400 GS, 320GB Disc (2)]

hi from rushman.

Zypper dup.

Hi Ruhsman,
upscope is asking about your software repositories.

Could you please post the result from “zypper repos” here?

There have been a lot of changes for the current repos for 11.2, so I
wonder which URLs you are using to do a successful update…

On 10/28/2009 04:56 PM, rushman wrote:
> hi from rushman.
>
> Zypper dup.
>
>
>

sorry,

-------±--------±-------
1 | 11.2 | 11.2 | Yes | Yes
2 | download.opensuse.org-Community | openSUSE BuildService - KDE:KDE4:Community | Yes | Yes
3 | ftp.skynet.be-factory | Packman Repository | Yes | Yes
4 | http-download.opensuse.org-5c1b974e | Updates for openSUSE 11.2-0 | Yes | Yes
5 | openSUSE 11.2-0 | openSUSE 11.2-0 | No | No
6 | openSUSE_11.2 | openSUSE_11.2 | Yes | Yes
7 | openSUSE_11.2_1 | openSUSE_11.2 | Yes | Yes
8 | openSUSE_11.2_KDE4_Factory_Desktop | openSUSE_11.2_KDE4_Factory_Desktop | Yes | Yes
9 | openSUSE_11.2_KDE4_Factory_Desktop_1 | openSUSE_11.2_KDE4_Factory_Desktop | Yes | Yes
10 | repo-debug | openSUSE-11.2-Debug | No | Yes
11 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes | Yes
12 | repo-oss | openSUSE-11.2-Oss | Yes | Yes
13 | repo-source | openSUSE-11.2-Source | Yes | Yes

RC2 is scheduled to be released tomorrow isn’t it?

RC2 is scheduled to be released tomorrow isn’t it?

Here the time now is 1:30AM and date is 29oct, and it will release tom on 30th oct, hope the same with you.

If someone has a repo that gives RC2 could you please tell others??? And be specific. I can’t find it anywhere:

factory-snapshot = RC2? - openSUSE Forums

I’m getting it right now, I think - 1339 packages 1.1 GB.

This is just zypper up, still have to see what zypper dup has.

Here’s my repo list

1 | ftp.skynet.be-factory               | Packman Repository          | Yes     | Yes     | http://ftp.skynet.be/pub/packman/suse/factory/
2 | http-download.opensuse.org-159ccb79 | Updates for openSUSE 11.2-0 | Yes     | Yes     | http://download.opensuse.org/update/11.2/
3 | openSUSE 11.2-0                     | openSUSE 11.2-0             | No      | No      | cd:///
4 | repo-debug                          | openSUSE-11.2-Debug         | No      | Yes     | http://download.opensuse.org/debug/distribution/11.2/repo/oss/
5 | repo-non-oss                        | openSUSE-11.2-Non-Oss       | Yes     | Yes     | http://download.opensuse.org/distribution/11.2/repo/non-oss/
6 | repo-oss                            | openSUSE-11.2-Oss           | Yes     | Yes     | http://download.opensuse.org/distribution/11.2/repo/oss/
7 | repo-source                         | openSUSE-11.2-Source        | Yes     | Yes     | http://download.opensuse.org/source/distribution/11.2/repo/oss/

The RC is looking good on my end though. Unfortunately on one of my old test machines, X doesn’t behave properly. It definitely boots much faster than the previous milestones. :wink:

zypper dup to rc2 as well as packman 11.2 and KDE4.3.2 repo worked with no problems.

rushman wrote:

>
> Hi to all,
>
> I updated RC1 this morning with no
> problems. It does not show as RC2,
> but as suse 11.2.
> Nearly 800 megs of updates and new
> packages.
>
> 1394,dvgrab, kino, kdenlive do not load
> but hope fully that will change when the
> packman repo comes on line.
>
> very fast to load and shut down.KDE seems
> very stable.
>
> rushman (jim)
>
>
I updated yesterday using same repo’s that markcynt mentions. I used zypper
dup. Took a while but worked fine. My install does not say RC2 but the
kernel appears correct, I think:

– 8 2.6.31.5-0.1-default #1 SMP 2009-10-26 15:49:03 +0100 x86_64 x86_64
x86_64 GNU/Linux

Russ
[openSUSE 11.2 (8 2.6.31.5-0.1-default x86_64] KDE 4.3.2 release 2, Intel
Core 2 Dual E7200. 4 GB DDR III GeForce 8400 GS, 320GB Disc (2)

Same here: upgrade went smoothly, but the system still shows me RC1.

~ # zypper repos

# | Alias                               | Name                        | Enabled | Refresh
--+-------------------------------------+-----------------------------+---------+--------
1 | http-download.opensuse.org-15c35889 | Updates for openSUSE 11.2-0 | Yes     | Yes
2 | openSUSE 11.2-0                     | openSUSE 11.2-0             | Yes     | No
3 | openSUSE:Factory:Contrib            | openSUSE:Factory:Contrib    | Yes     | Yes
4 | repo-debug                          | openSUSE-11.2-Debug         | No      | Yes
5 | repo-non-oss                        | openSUSE-11.2-Non-Oss       | Yes     | Yes
6 | repo-oss                            | openSUSE-11.2-Oss           | Yes     | Yes
7 | repo-source                         | openSUSE-11.2-Source        | No      | Yes

Kernel showing corerct rc2 kernel:
~ # uname -a

Linux ... 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux

Did you tun zypper up and zypper dup?

I did both.

I wonder if repo #3 is preventing a full upgrade.

The system should be showing openSUSE 11.2.

http://i48.photobucket.com/albums/f226/markcynt1/th_snapshot1.png](http://i48.photobucket.com/albums/f226/markcynt1/snapshot1.png)

To update from rc1 to rc2 will zypper up work or do I have to use zypper dup? thanks

markcynt wrote:

>
> gavro_g;2057739 Wrote:
>> Same here: upgrade went smoothly, but the system still shows me RC1.
>>
>> ~ # zypper repos
>> >
> Code:
> --------------------
> > > # | Alias | Name
> > > # | | Enabled | Refresh
> >
–±------------------------------------±----------------------------±--------±-------
> > 1 | http-download.opensuse.org-15c35889 | Updates for openSUSE 11.2-0
> > | Yes | Yes
> > 2 | openSUSE 11.2-0 | openSUSE 11.2-0
> > | Yes | No
> > 3 | openSUSE:Factory:Contrib | openSUSE:Factory:Contrib
> > | Yes | Yes
> > 4 | repo-debug | openSUSE-11.2-Debug
> > | No | Yes
> > 5 | repo-non-oss | openSUSE-11.2-Non-Oss
> > | Yes | Yes
> > 6 | repo-oss | openSUSE-11.2-Oss
> > | Yes | Yes
> > 7 | repo-source | openSUSE-11.2-Source
> > | No | Yes
> >

I did not use repo #3 mentioned. Heres is my repos. I know I need to remove
some of the unused ones, but I’m still getting things working.

| Alias | Name |

Enabled | Refresh
—±------------------------------------±----------------------------±—
-----±-------
1 | Iscan | Iscan | No
| No
2 | KDE4.3.2_-X11 | KDE4.3.2 - X11 | No
| No
3 | KDE4.3
-Community | KDE4.3 - Community | Yes
| No
4 | KDE43 | KDE43 - Desktop | Yes
| No
5 | OpenSUSE11.1
-_Nvidia | Nvidia | No
| No
6 | PHP | PHP | No
| No
7 | download.opensuse.org-SUSE_Factory | Mozilla | No
| No
8 | download.videolan.org-SuSE | VideoLan | No
| No
9 | ftp.skynet.be-factory | Packman | Yes
| No
10 | http-download.opensuse.org-8ac13bb6 | Updates for openSUSE 11.2-0 | Yes
| No
11 | openSUSE 11.2-0 | openSUSE 11.2-0 | No
| No
12 | openSUSE_11.2-0 | openSUSE 11.2-0 Temp-Oss | No
| No
13 | openSUSE_Factory
-_KDE4 | openSUSE_Factory - KDE4 | No
| No
14 | repo-debug | openSUSE-11.2-Debug | No
| No
15 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes
| No
16 | repo-oss | openSUSE-11.2-Oss | Yes
| No
>
>


Russ
[openSUSE 11.2 (8 2.6.31.5-0.1-default x86_64] KDE 4.3.2 release 2, Intel
Core 2 Dual E7200. 4 GB DDR III GeForce 8400 GS, 320GB Disc (2)

Remove that repo (was using is for chromium, but just found another repo ( Index of /repositories/home:/rwooninck:/chromium/openSUSE_11.2 ), and redid zypper dup -> issue fixed!

thnx!

I’m not sure if you need to run zypper up first but you do have to run **zypper dup.

**When I upgraded I first ran zypper up, which was a very large update for me (1.1 GB).

But that didn’t fully change me over to RC2.

I then ran zypper dup, which was very small in comparison and that updated my system to RC2.

I did zypper up and then the dup command and here’s the result on my 64 bit system.
http://media.snimka.bg/4738/015730907-big.jpg