problem of bumblebee in 13.1 x86_64

English Hardware
#1

According the page : http://smithfarm-thebrain.blogspot.cz/2013/10/opensuse-131-nvidia-optimus-bumblebee.html , I use Overman79’s repository : http://download.opensuse.org/repositories/home:/Overman79:/Laptop/openSUSE_13.1/

But I can not install dkms-nvidia and x11-video-nvidia from the repository .

$ sudo zypper in x11-video-nvidia
root's password:
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following NEW package is going to be installed:
  x11-video-nvidia 

1 new package to install.
Overall download size: 9.8 KiB. After the operation, additional 495.0 B will be 
used.
Continue? [y/n/? shows all options] (y): 
(1/1) Installing: x11-video-nvidia-331.38-3.1 ...........................[error]
Installation of x11-video-nvidia-331.38-3.1 failed:
Error: Subprocess failed. Error: RPM failed: Error in checksums 142193369 564647467
error: %pre(x11-video-nvidia-331.38-3.1.x86_64) scriptlet failed, exit status 254
error: x11-video-nvidia-331.38-3.1.x86_64: install failed


Abort, retry, ignore? [a/r/i] (a): 
Problem occured during or after installation or removal of packages:
Installation aborted by user

Please see the above error message for a hint.

$ sudo zypper in dkms-nvidia
Loading repository data...
Reading installed packages...
Resolving package dependencies...

The following NEW package is going to be installed:
  dkms-nvidia 

1 new package to install.
Overall download size: 6.6 KiB. After the operation, additional 513.0 B will be 
used.
Continue? [y/n/? shows all options] (y): 
(1/1) Installing: dkms-nvidia-331.38-2.1 ................................[error]
Installation of dkms-nvidia-331.38-2.1 failed:
Error: Subprocess failed. Error: RPM failed: Error in checksums 142193369 564647467
error: %pre(dkms-nvidia-331.38-2.1.x86_64) scriptlet failed, exit status 254
error: dkms-nvidia-331.38-2.1.x86_64: install failed


Abort, retry, ignore? [a/r/i] (a): 
Problem occured during or after installation or removal of packages:
Installation aborted by user

Please see the above error message for a hint.

I use 13.1 x86_64 gnome 3.10 version.
How to do with it ?

Thanks

#2

Are you sure you point to the correct repo?

#3

I am sure : I use http://download.opensuse.org/repositories/home:/Overman79:/Laptop/openSUSE_13.1/ according to http://smithfarm-thebrain.blogspot.cz/2013/10/opensuse-131-nvidia-optimus-bumblebee.html .

Thanks

#4

I installed the same versions of dkms-nvidia and x11-video-nvidia, from the same repository, a couple days ago and had no trouble. Please post the output of the following commands:


# zypper se -s dkms-nvidia
# zypper se -s x11-video-nvidia
# zypper lr Overman79
#5

It is of interest to look at the NVIDIA installation script that is downloaded and is supposed to install the binary blob:

There you can see that the error occurs in the following line:

echo "Error in checksums $sum1 $CRCsum"

One plausible scenario for this to occur is that the file was not completely downloaded, or was corrupted somehow in transit. Try reinstalling the package via

zypper in -f
#6 
opensuse-tf:~ # zypper se -s dkms-nvidia
Loading repository data...
Reading installed packages...

S | Name        | Type       | Version    | Arch   | Repository           
--+-------------+------------+------------+--------+----------------------
  | dkms-nvidia | package    | 331.38-2.1 | x86_64 | home:Overman79:Laptop
  | dkms-nvidia | package    | 331.38-2.1 | i586   | home:Overman79:Laptop
  | dkms-nvidia | srcpackage | 331.38-2.1 | noarch | home:Overman79:Laptop
opensuse-tf:~ # zypper se -s x11-video-nvidia
Loading repository data...
Reading installed packages...

S | Name                   | Type       | Version    | Arch   | Repository           
--+------------------------+------------+------------+--------+----------------------
  | x11-video-nvidia       | package    | 331.38-3.1 | x86_64 | home:Overman79:Laptop
  | x11-video-nvidia       | package    | 331.38-3.1 | i586   | home:Overman79:Laptop
  | x11-video-nvidia       | srcpackage | 331.38-3.1 | noarch | home:Overman79:Laptop
  | x11-video-nvidia-32bit | package    | 331.38-3.1 | x86_64 | home:Overman79:Laptop
opensuse-tf:~ # zypper lr Overman79
Repository 'Overman79' not found by its alias, number, or URI.
Use 'zypper repos' to get the list of defined repositories.

opensuse-tf:~ # zypper lr home:Overman79:Laptop
Alias          : home:Overman79:Laptop                                                           
Name           : home:Overman79:Laptop                                                           
URI            : http://download.opensuse.org/repositories/home:/Overman79:/Laptop/openSUSE_13.1/
Enabled        : Yes                                                                             
Priority       : 99                                                                              
Auto-refresh   : On                                                                              
Keep Packages  : On                                                                              
Type           : rpm-md                                                                          
GPG Check      : On                                                                              
GPG Key URI    :                                                                                 
Path Prefix    :                                                                                 
Parent Service :                                                                                 
MD Cache Path  : /var/cache/zypp/raw/home:Overman79:Laptop              


# zypper in -f dkms-nvidia
Loading repository data...
Reading installed packages...
Forcing installation of 'dkms-nvidia-331.38-2.1.x86_64' from repository 'home:Overman79:Laptop'.
Resolving package dependencies...

The following NEW package is going to be installed:
  dkms-nvidia 

1 new package to install.
Overall download size: 6.6 KiB. After the operation, additional 513.0 B will be used.
Continue? [y/n/? shows all options] (y): 
(1/1) Installing: dkms-nvidia-331.38-2.1 ...............................................................................[error]
Installation of dkms-nvidia-331.38-2.1 failed:
Error: Subprocess failed. Error: RPM failed: Error in checksums 142193369 564647467
error: %pre(dkms-nvidia-331.38-2.1.x86_64) scriptlet failed, exit status 254
error: dkms-nvidia-331.38-2.1.x86_64: install failed


Abort, retry, ignore? [a/r/i] (a): r            
(1/1) Installing: dkms-nvidia-331.38-2.1 ...............................................................................[error]
Installation of dkms-nvidia-331.38-2.1 failed:
Error: Subprocess failed. Error: RPM failed: Error in checksums 142193369 564647467
error: %pre(dkms-nvidia-331.38-2.1.x86_64) scriptlet failed, exit status 254
error: dkms-nvidia-331.38-2.1.x86_64: install failed


Abort, retry, ignore? [a/r/i] (a): a
Problem occured during or after installation or removal of packages:
Installation aborted by user

Please see the above error message for a hint.

Thanks

#7

You do not want all packages you want only the packages for your architecture. It looks like you installed all packages.

#8

I see. It is about the file NVIDIA-Linux-x86_64-331.38.run, I do not download it completely.
This file is not in /var/cache, it is in /usr/src .
You must delete the file manually and rerun those install commands.

Now it is OK. Thanks

PS: How to mark the post as SOLVED ?

#9

I got the same error the exit code is different

2014-02-22 14:33:42 (379 KB/s) - 'NVIDIA-Linux-x86_64-331.38.run' saved [60164869/60164869]

check sums and md5 sums are ok
Creating directory NVIDIA-Linux-x86_64-331.38
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 331.38......................................................................................................................................................................................................................
error: %pre(dkms-nvidia-331.38-2.1.x86_64) scriptlet failed, exit status 1
error: dkms-nvidia-331.38-2.1.x86_64: install failed

Any hint please?

#10

Unfortunately my GUI doesn’t work. My Hardware is:

vaio-i5:~ # lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M LE] (rev a1)

I got some more output. Running the installation command

zypper in dkms dkms-nvidia dkms-bbswitch bumblebee primus x11-video-nvidia

I got the following error message

2014-02-24 14:35:26 (385 KB/s) - 'NVIDIA-Linux-x86_64-331.38.run' saved [60164869/60164869]

check sums and md5 sums are ok
Creating directory NVIDIA-Linux-x86_64-331.38
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 331.38......................................................................................................................................................................................................................
+ '' -x /usr/sbin/dkms ']'
+ /usr/sbin/dkms add -m nvidia -v 331.38-2.1 --rpm_safe_upgrade

Creating symlink /var/lib/dkms/nvidia/331.38-2.1/source ->
                 /usr/src/nvidia-331.38-2.1

DKMS: add completed.
+ /usr/sbin/dkms build -m nvidia -v 331.38-2.1

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....(bad exit status: 2)
make KERNELRELEASE=3.11.10-7-desktop -C /lib/modules/3.11.10-7-desktop/build SUBDIRS=/var/lib/dkms/nvidia/331.38-2.1/build modules....(bad exit status: 2)
Error! Bad return status for module build on kernel: 3.11.10-7-desktop (x86_64)
Consult /var/lib/dkms/nvidia/331.38-2.1/build/make.log for more information.
+ /usr/sbin/dkms install -m nvidia -v 331.38-2.1

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area....(bad exit status: 2)
make KERNELRELEASE=3.11.10-7-desktop -C /lib/modules/3.11.10-7-desktop/build SUBDIRS=/var/lib/dkms/nvidia/331.38-2.1/build modules....(bad exit status: 2)
Error! Bad return status for module build on kernel: 3.11.10-7-desktop (x86_64)
Consult /var/lib/dkms/nvidia/331.38-2.1/build/make.log for more information.
+ popd

The content of the make log file is


vaio-i5:~ # cat /var/lib/dkms/nvidia/331.38-2.1/build/make.log 
DKMS make.log for nvidia-331.38-2.1 for kernel 3.11.10-7-desktop (x86_64)
Mon Feb 24 14:35:42 CET 2014
make: Entering directory `/usr/src/linux-3.11.10-7-obj/x86_64/desktop'
make: Entering an unknown directory
make: *** ../../../linux-3.11.10-7: No such file or directory.  Stop.
make: Leaving an unknown directory
make: *** [all] Error 2
make: Leaving directory `/usr/src/linux-3.11.10-7-obj/x86_64/desktop'

I have the obj directory installed it seems to looking for the …/…/…/linux-3.11.10-7: directory. How can I get it?

I appreciate very much any help

#11

Apparently you don’t have kernel-devel-3.11.10-7.1 installed.
Try to (re-)install it even if you do have it installed, since apparently that directory is missing.

sudo zypper in -f kernel-devel-3.11.10-7.1
#12

After installing kernel source the make error log changed like this


DKMS make.log for bbswitch-0.8 for kernel 3.11.10-7-desktop (x86_64)
Mon Feb 24 15:33:55 CET 2014
make -C /lib/modules/3.11.10-7-desktop/build M="$(pwd)" modules
make[1]: Entering directory `/usr/src/linux-3.11.10-7-obj/x86_64/desktop'
make[2]: *** No rule to make target `modules'.  Stop.
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-3.11.10-7-obj/x86_64/desktop'
make: *** [default] Error 2
#13

Hm, maybe you are missing other devel packages for 3.11.10-7 as well?

rpm -qa | grep kernel

In particular try (re-)installing kernel-desktop-devel-3.11.10-7.1.

#14 
vaio-i5:~ # rpm -qa | grep kernel
kernel-devel-3.11.10-7.1.noarch
kernel-devel-3.11.6-4.1.noarch
kernel-desktop-3.11.6-4.1.x86_64
kernel-source-3.11.10-7.1.noarch
texlive-l3kernel-2013.72.svn_4469svn29409-10.2.1.noarch
kernel-desktop-3.11.10-7.1.x86_64
kernel-firmware-20130714git-2.5.1.noarch
texlive-l3kernel-doc-2013.72.svn_4469svn29409-10.2.1.noarch
kernel-desktop-devel-3.11.6-4.1.x86_64
kernel-desktop-devel-3.11.10-7.1.x86_64
#15

kernel desktop reinstalled same problem

#16

Hm, try to install the whole kernel development pattern then, as suggested in the tutorial (see the first post in this thread).

Either in YaST->Software Management->View->Patterns or with:

sudo zypper in -t pattern devel_kernel
#17

Done with no positive results. I need my laptop to work, try to reinstall could be wise?

#18

Sadly I’m enable to use the intel graphic driver. After removed the nvidia packages I’m not able to get X windows working

#19

If you have a file /etc/X11/xorg.conf, remove it.
If you have “nomodeset” added to the kernel boot options, remove it.

Remove all the other packages you installed like bumblebee, primus, dkms, dkms-nvidia, dkms-bbswitch.

If it doesn’t work still, please post /var/log/Xorg.0.log.

Btw, did you follow the guide in the first post for installing Bumblebee?
This explains how to completely uninstall it as well, right at the beginning.

#20

done with no results

Btw, did you follow the guide in the first post for installing Bumblebee?
This explains how to completely uninstall it as well, right at the beginning.

Yes my system worked fine till last update…
File Xorg.0.log is too long I left only intel echos


   301.702] .......
   302.749] (II) LoadModule: "dri2"
   302.749] (II) Module "dri2" already built-in
   302.749] (II) LoadModule: "glamoregl"
   302.777] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
   302.929] (II) Module glamoregl: vendor="X.Org Foundation"
   302.929]     compiled for 1.14.3.901, module version = 0.5.1
   302.929]     ABI class: X.Org ANSI C Emulation, version 0.4
   302.929] (II) LoadModule: "glx"
   302.929] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
   302.961] (II) Module glx: vendor="X.Org Foundation"
   302.961]     compiled for 1.14.3.901, module version = 1.0.0
   302.961]     ABI class: X.Org Server Extension, version 7.0
   302.961] (==) AIGLX enabled
   302.977] Loading extension GLX
   302.977] (II) LoadModule: "intel"
   302.977] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
   303.016] (II) Module intel: vendor="X.Org Foundation"
   303.016]     compiled for 1.14.3.901, module version = 2.99.906
   303.016]     Module class: X.Org Video Driver
   303.016]     ABI class: X.Org Video Driver, version 14.1
   303.016] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
   303.016] (--) using VT number 3

   303.086] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
   303.086] (==) intel(0): Depth 24, (--) framebuffer bpp 32
   303.086] (==) intel(0): RGB weight 888
   303.086] (==) intel(0): Default visual is TrueColor
   303.086] (**) intel(0): Option "AccelMethod" "uxa"
   303.086] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
   303.086] (**) intel(0): Relaxed fencing enabled
   303.086] (**) intel(0): Wait on SwapBuffers? enabled
   303.086] (**) intel(0): Triple buffering? enabled
   303.086] (**) intel(0): Framebuffer tiled
   303.086] (**) intel(0): Pixmaps tiled
   303.086] (**) intel(0): 3D buffers tiled
   303.086] (**) intel(0): SwapBuffers wait enabled
   303.086] (==) intel(0): video overlay key set to 0x101fe
   303.086] (II) intel(0): Output LVDS1 has no monitor section
   303.086] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
   303.087] (II) intel(0): Output VGA1 has no monitor section
   303.087] (II) intel(0): Output HDMI1 has no monitor section
   303.087] (II) intel(0): Output DP1 has no monitor section
   303.104] (II) intel(0): Output HDMI2 has no monitor section
   303.104] (II) intel(0): Output DP2 has no monitor section
   303.104] (II) intel(0): EDID for output LVDS1
   303.104] (II) intel(0): Manufacturer: AUO  Model: 312c  Serial#: 0
   303.104] (II) intel(0): Year: 2010  Week: 0
   303.104] (II) intel(0): EDID Version: 1.3
   303.104] (II) intel(0): Digital Display Input
   303.104] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
   303.104] (II) intel(0): Gamma: 2.20
   303.104] (II) intel(0): No DPMS capabilities specified
   303.104] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
   303.104] (II) intel(0): First detailed timing is preferred mode
   303.104] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.325 greenY: 0.540
   303.104] (II) intel(0): blueX: 0.150 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
   303.104] (II) intel(0): Manufacturer's mask: 0
   303.104] (II) intel(0): Supported detailed timing:
   303.104] (II) intel(0): clock: 75.0 MHz   Image Size:  293 x 164 mm
   303.104] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1562 h_border: 0
   303.104] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 800 v_border: 0
   303.104] (II) intel(0): Unknown vendor-specific block f
   303.104] (II) intel(0):  AUO
   303.104] (II) intel(0):  B133XW03 V1
   303.104] (II) intel(0): EDID (in hex):
   303.104] (II) intel(0):     00ffffffffffff0006af2c3100000000
   303.104] (II) intel(0):     00140103801d10780a15859758538a26
   303.104] (II) intel(0):     25505400000001010101010101010101
   303.104] (II) intel(0):     0101010101014a1d56c4500020303020
   303.104] (II) intel(0):     360025a4100000180000000f00000000
   303.104] (II) intel(0):     00000000000000000020000000fe0041
   303.104] (II) intel(0):     554f0a202020202020202020000000fe
   303.104] (II) intel(0):     004231333358573033205631200a00ba
   303.104] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
   303.104] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
   303.104] (II) intel(0): Printing probed modes for output LVDS1
   303.104] (II) intel(0): Modeline "1366x768"x60.0   74.98  1366 1414 1446 1562  768 771 777 800 -hsync -vsync (48.0 kHz eP)
   303.104] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
   303.104] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
   303.104] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
   303.104] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
   303.105] (II) intel(0): EDID for output VGA1
   303.105] (II) intel(0): EDID for output HDMI1
   303.105] (II) intel(0): EDID for output DP1
   303.121] (II) intel(0): EDID for output HDMI2
   303.121] (II) intel(0): EDID for output DP2
   303.121] (II) intel(0): Output LVDS1 connected
   303.121] (II) intel(0): Output VGA1 disconnected
   303.121] (II) intel(0): Output HDMI1 disconnected
   303.121] (II) intel(0): Output DP1 disconnected
   303.121] (II) intel(0): Output HDMI2 disconnected
   303.121] (II) intel(0): Output DP2 disconnected
   303.121] (II) intel(0): Using exact sizes for initial modes
   303.121] (II) intel(0): Output LVDS1 using initial mode 1366x768
   303.121] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
   303.121] (II) intel(0): Kernel page flipping support detected, enabling
   303.121] (==) intel(0): DPI set to (96, 96)
   303.121] (II) Loading sub module "fb"
   303.121] (II) LoadModule: "fb"
   303.121] (II) Loading /usr/lib64/xorg/modules/libfb.so
   303.138] (II) Module fb: vendor="X.Org Foundation"
   303.138]     compiled for 1.14.3.901, module version = 1.0.0
   303.138]     ABI class: X.Org ANSI C Emulation, version 0.4
   303.138] (II) Loading sub module "dri2"
   303.139] (II) LoadModule: "dri2"
   303.139] (II) Module "dri2" already built-in
   303.139] (==) Depth 24 pixmap format is 32 bpp
   303.139] (II) intel(0): [DRI2] Setup complete
   303.139] (II) intel(0): [DRI2]   DRI driver: i965
   303.139] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
   303.142] (II) UXA(0): Driver registered support for the following operations:
   303.142] (II)         solid
   303.142] (II)         copy
   303.142] (II)         composite (RENDER acceleration)
   303.142] (II)         put_image
   303.142] (II)         get_image
   303.142] (==) intel(0): Backing store disabled
   303.142] (==) intel(0): Silken mouse enabled
   303.143] (II) intel(0): Initializing HW Cursor
   303.143] (II) intel(0): Use standard UXA acceleration.
   303.143] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
   303.144] (==) intel(0): DPMS enabled
   303.144] (==) intel(0): Intel XvMC decoder enabled
   303.144] (II) intel(0): Set up textured video
   303.144] (II) intel(0): [XvMC] xvmc_vld driver initialized.
   303.144] (II) intel(0): direct rendering: DRI2 Enabled
   303.144] (==) intel(0): hotplug detection: "enabled"
   303.165] (--) RandR disabled
   303.306] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
   303.306] (II) AIGLX: enabled GLX_INTEL_swap_event
   303.306] (II) AIGLX: enabled GLX_ARB_create_context
   303.306] (II) AIGLX: enabled GLX_ARB_create_context_profile
   303.306] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
   303.306] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
   303.306] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
   303.306] (II) AIGLX: Loaded and initialized i965
   303.306] (II) GLX: Initialized DRI2 GL provider for screen 0
   303.306] (II) intel(0): Setting screen physical size to 361 x 203
   303.768] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
   303.768] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
   303.768] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
   303.768] (**) Video Bus: Applying InputClass "LocalKeyboard"
   303.768] (II) LoadModule: "evdev"
   303.768] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
   303.799] (II) Module evdev: vendor="X.Org Foundation"
   303.799]     compiled for 1.14.3, module version = 2.8.2
   303.799]     Module class: X.Org XInput Driver
   303.799]     ABI class: X.Org XInput driver, version 19.1
   303.799] (II) Using input driver 'evdev' for 'Video Bus'
   303.799] (**) Video Bus: always reports core events
.........
   327.616] (EE) Server terminated successfully (0). Closing log file.