Printing Problem thru IPP - HPLIP

English Hardware
1

Hi,

I have following setup on my one of the customer where we had suplly thin client.

Customer have their old system with SuSE Linux Enterprise Desktop 10.2 with HP LaserJet P1008. They had configure this printer thru foo2xqx & HPLIP 2.8.10.

Our Thin Client which we had supplied with SuSE Linux Enterprise Desktop 11.1 & HPLIP 3.10.2.

I am able to install HP printer on my thinclient but thru IPP but, when we fire any print command I am getting “Stopped: /usr/lib/cups/filter/foomatic-rip-hplip failed” error. If I can connect printer on thinclient I am able to print. But, thru IPP share I am not able to print.

Also, customer have their old thinclient also on which they share this printer so, I am not able to detach this printer from that system.

Pls. help to resolve this problem.

Thanks,
Daxesh

2

I’m going to refer you to this post, as it may be relevant to your situation.

3

Hi there,

I’ve had issues with the default security policy in /etc/cups/cupsd.conf, which you may want to look at. Also, you might get some additional information by turning dubugging in cupsd.conf (LogLevel debug) and watching the log at var/log/cups/error_log might show a permission or other issue.

A blog post I wrote, covering both these points, can be found at: HP C309g Wireless Linux Printing & HPLIP - Mine the Harvest

Cheers,
Lews Therin

4

On Tue January 4 2011 04:06 am, daxu13 wrote:

>
> Hi,
>
> I have following setup on my one of the customer where we had suplly
> thin client.
>
> Customer have their old system with SuSE Linux Enterprise Desktop 10.2
> with HP LaserJet P1008. They had configure this printer thru foo2xqx &
> HPLIP 2.8.10.
>
> Our Thin Client which we had supplied with SuSE Linux Enterprise
> Desktop 11.1 & HPLIP 3.10.2.
>
> I am able to install HP printer on my thinclient but thru IPP but, when
> we fire any print command I am getting “Stopped:
> /usr/lib/cups/filter/foomatic-rip-hplip failed” error. If I can connect
> printer on thinclient I am able to print. But, thru IPP share I am not
> able to print.
>
> Also, customer have their old thinclient also on which they share this
> printer so, I am not able to detach this printer from that system.
>
> Pls. help to resolve this problem.
>
> Thanks,
> Daxesh
>
>
Daxesh;
In addition to the comments by deano ferrari and LewisTherinTelemon this Howto
gives step by step instructions. It should work for SLED as well as
OpenSuse.

http://opensuse.swerdna.org/suseprintipp.html

Since this is a SLED problem, if our advice does not help, you might post to
the SLE forums here:

http://forums.novell.com/

–
P. V.
“We’re all in this together, I’m pulling for you.” Red Green